Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Weston, FL
Gate installation in Weston runs $2,800 to $9,500 for most residential driveway gates, with commercial and custom work going higher. Weston’s master-planned villages mean nearly every install has to pass an HOA architectural review before we touch a post hole. If your gate is 15 to 35 years old, rusted through at the welds, or running an operator that’s no longer supported, replacing it is usually smarter than repairing it again. Miami Gate Company has served Weston since 2012, and we handle the full job: design, HOA documentation, concrete work, operator wiring, and final programming. Call (833) 570-5807 for a free on-site estimate.
Why Weston Homes Are Different
Weston is a mandatory-HOA city. That changes the gate business in a way most homeowners don’t anticipate until the violation notice arrives. Almost every residential neighborhood in the 33327 ZIP is governed by an architectural review board that sets specific standards for driveway and entry gates: wrought-iron picket spacing, finish color, operator housing, even the placement of the keypad post. A gate that works fine mechanically but doesn’t match the community’s approved spec can still generate a compliance letter. That’s the reality of gate work here.
The housing stock adds a second layer. Weston’s Mediterranean-style homes were built primarily between the late 1980s and the mid-2000s, and the driveway gates installed during those decades are now squarely in their end-of-life window. Operators fail, hinges sag, welds rust through at the base where irrigation spray hits them. On top of that, Weston’s subtropical weather – heavy sun, year-round humidity, salt-tinted air off the coast – eats control boards and photo-eye sensors faster than inland communities see. When we replace a gate in Weston, we’re usually matching an existing streetscape, not starting from a blank slate.
Styles & brands we work with
Our Main Weston Services
Weston homeowners call us most often for two things: a gate that won’t open at all, and a gate that opens when it shouldn’t. Here’s how we handle both.
Gate Repair in Weston
A sagging hinge, a rusted weld, a wheel that’s chewed through its track – these are the mechanical failures we see most in Weston, and they’re almost always repairable without replacing the whole gate. The subtropical climate works against steel gates year-round, but corrosion at the bottom rail and hinge welds is the classic Weston failure point. We cut out the rust, reinforce the post, re-weld, and repaint to match the HOA-approved color. Your gate stays. Your HOA stays quiet. That’s the point. Read more about what we fix on our Gate Repair in Weston page.
Electric Gate Repair in Weston
When a gate stops responding to the remote, or closes halfway and reverses, the problem is rarely the gate itself – it’s the electronics driving it. Weston’s summer thunderstorms produce real surge damage. We’ve pulled apart control boards that were fried by a lightning strike two blocks away. Motor capacitors swell from heat. Photo-eyes corrode from humidity. We diagnose at the component level: motor, board, loop detector, safety sensors, and remote receiver. If the part is repairable, we repair it. If it’s toast, we replace with the correct spec for your operator. Details are on our Electric Gate Repair in Weston page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Weston
Gate installation in Weston typically runs $2,800 to $9,500 for a residential driveway gate, depending on material, automation, and width. What makes Weston installs unique is the approval layer: before we order steel, we prepare the spec sheet, finish sample, and site plan your HOA’s architectural board needs to sign off. The climate factor is real too – we specify marine-grade or factory-primed steel and weather-sealed operators for Weston’s humidity and salt air because standard finishes start showing rust at the welds within two years here.
We install gates for communities standards-compliant from day one, so you’re not dealing with a violation notice on a gate we just built. Our Gate Installation service covers everything from the first site measure to the final remote programming and a walkthrough of how your operator’s manual release works if the power fails.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car in the rain to open a manual gate, or your current operator fails repeatedly and replacement parts are no longer manufactured.
What it costs in Weston
Automatic gate operators and full automation packages run $2,800 to $9,500 depending on gate weight, operator type, and whether we’re adding vehicle detection loops or safety edges.
How we do it
We measure the gate weight and panel span, spec a properly rated operator for the load, and install it on a reinforced post base with the control board housed in a weather-sealed enclosure, then program remotes, keypad, and a backup release.
Sliding Gate Installation
Signs you need it
Your short driveway doesn’t have room for a swing gate to arc open, or your existing sliding gate binds on its track after years of settling.
What it costs in Weston
Sliding gate systems in Weston run $3,400 to $9,500, with the heavier end covering reinforced tracks, cantilever designs, and operators rated for 1,000-pound-plus panels.
How we do it
We pour a level track bed with proper drainage so standing water doesn’t undermine the slab, mount steel V-track or cantilever rollers rated for the panel weight, and dial in the operator’s travel and slowdown points so the gate doesn’t slam into the end stops.
Driveway Gate Installation
Signs you need it
Your driveway opens directly onto a street where passing traffic or neighborhood cut-throughs make a physical barrier worth installing.
What it costs in Weston
Expect $2,800 to $9,500 depending on swing vs. sliding configuration, decorative aluminum vs. wrought iron, and whether we run power from the house or use solar.
How we do it
We set posts in deep concrete footers sized for the gate’s load, hang the panel with adjustable hinges so it can be fine-tuned as the post settles, and match the finish to your HOA’s paint chart before the first coat goes on.
What Gate Installation Costs in Weston
| Item | Typical range in Weston |
|---|---|
| Residential automatic driveway gate | $2,800 – $9,500 |
| Sliding gate system | $3,400 – $9,500 |
| Electric gate installation with operator | $2,800 – $9,500 |
How long does a full gate installation take in Weston?
Most residential installs run two to three days across two visits: one for concrete footers to cure and one for hanging the gate, mounting the operator, and programming. HOA approval can add two to four weeks before we order materials, so plan around the review calendar rather than the construction time itself.
Do I need HOA approval before installing a gate in Weston?
Yes, in nearly every Weston village. Almost every neighborhood is governed by a mandatory HOA with an architectural review board, and gate installations are among the most commonly cited items. We prepare the submittal package – drawings, finish samples, operator specs – so the application shows what the board’s actually looking for.
Brands We Service in Weston
Weston gates run on a broad mix of operators, depending on what the original builder specified. We stock and service components for DoorKing, Elite, Mighty Mule, and Ghost Controls, among others, which means we’re not the contractor who shows up, blames the brand, and tells you to buy a new system. For a full list of what we work on, see our brands. We keep common boards, photo-eyes, and remote receivers in the truck so most Weston repairs happen same-trip.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Weston, FL
| Service | Typical range in Weston |
|---|---|
| Gate opener repair | $180 – $450 |
| Gate motor replacement | $650 – $2,650 |
| Control board replacement | $450 – $1,350 |
| Sensor replacement (photo-eye / loop detector) | $150 – $450 |
| Automatic gate service call / diagnostic visit | $85 – $185 |
| Track repair or realignment | $250 – $700 |
| Gate welding repair | $150 – $550 |
| Full gate replacement | $2,500 – $8,000 |
| Residential automatic driveway gate (installed) | $2,800 – $9,500 |
| Sliding gate system (installed) | $3,400 – $9,500 |
Two things push Weston pricing above the Broward average. First is HOA compliance work: if the board rejects your first finish sample or requires a different operator model than what’s currently on the gate, that adds back-and-forth and sometimes part swaps. Second is corrosion repair – by the time a Weston gate hits 20 years, rust is usually deeper than what shows on the surface, and we’ll need extra steel work before repainting. Whatever the job is, you get a written price agreed before any work starts. No surprises at the end of the invoice.
Neighborhoods We Serve in Weston
We work all through the 33327 ZIP, from the older eastern villages where builder-era gates are hitting full replacement age to the newer western sections where HOA finish matching is stricter. Every neighborhood has the same baseline for us: we show up with spec sheets and color cards because we’ll probably need them.
- Savanna
- Windmill Ranch Estates
- The Falls
- Emerald Estates
- Bonaventure
Most Weston service calls get a same-day or next-day visit; installs are scheduled around the concrete cure and your HOA’s review calendar, not our workload.
Service Area – Cities Near Weston
Miami Gate Company’s service area stretches beyond the Weston city line into the neighboring communities that share the same climate, similar housing stock, and a lot of the same gate hardware. We run calls into Southwest Ranches, FL, where driveway runs tend to be longer and gates wider, plus Sunshine Ranches, FL, Cooper City, FL, and Pine Island Ridge, FL. If you’re just outside Weston in any of these areas, the same team covers your job.
Serving Weston, FL — Our Local Coverage Area
We’re based in the Weston area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Weston
Most Weston repair calls get a visit same-day or next-day depending on when you call. Emergency situations – a gate stuck open on a busy road or stuck closed with a car inside – take priority in the schedule. Call (833) 570-5807 and we’ll give you a straight answer on when we can be there.
Yes. For installs and major replacements, we prepare the submittal package your architectural board needs: dimensional drawings, material and finish specs, operator model, and placement. The HOA still makes the decision, but a complete application avoids the revision loop that drags projects out for weeks.
We’re a Miami-based gate specialist that has served Weston since 2012. We’re not a franchise and not a generalist contractor. Every one of our technicians works on gates only – which matters when the fix requires diagnosing a DoorKing board rather than swapping a hinge, and when your HOA needs documentation that actually matches what was installed.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Weston Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Chris Norris"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Alma Vargas"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Bethany Hayes