Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Gladeview, FL
Gate installation in Gladeview usually comes down to fitting new driveway or perimeter gates onto older single-family properties, not spec homes or HOA developments. The neighborhood’s mix of mid-century concrete-block ranches and later homes means we see everything from original rusted iron gates to newer replacements that were never hung quite right. South Florida humidity and hurricane-season wind make post anchoring and hinge hardware the real test here. If your gate sags, binds, or will not close after a storm, call Miami Gate Company at (833) 570-5807 for an honest look at what it needs.
Why Gladeview Homes Are Different
Gladeview is an unincorporated, low-rise residential pocket of northwest Miami-Dade where most homes sit behind driveway and perimeter gates rather than in HOAs. That shapes the work we do. There is no property-management gate system on most streets here; instead, you get single-family lots with fenced yards, where gates were installed over decades by different contractors, builders, or homeowners themselves. The gate count is high because fenced yards are the norm, but the systems are inconsistent. One house has a well-built steel slide gate from the 1990s. The next has a wood gate hung on posts that have been rotting in place since the 2000s.
The housing stock runs toward modest concrete-block and stucco ranch-style homes on generous lots. That matters for gate work because the post footings were often poured before gate automation existed. What we see repeatedly in Gladeview is the older gate that was never designed for a motor being asked to carry one anyway, or the rusted hinge that was fine before ten summers of salt-laden air off Biscayne Bay got to it. We approach every job in Gladeview knowing the gate and the post it hangs on may both need attention, not just the visible failure.
Styles & brands we work with
Our Main Gladeview Services
Two jobs dominate the calls we take from Gladeview: bringing tired mechanical gates back into working order, and troubleshooting electric gates that have stopped responding or are moving erratically.
Gate Repair in Gladeview
Mechanical gate repair in Gladeview is mostly about re-hanging, reinforcing, and replacing what time and weather have worn down. Hinges seize in the humidity. Wood posts rot below ground and start leaning. Steel frames rust through at the base where sprinkler water hits them every week. We cut out the rust, sleeve or replace the post, re-hang the gate square, and adjust the latch so it actually catches. Whether it is a sagging driveway gate or a fence gate that scrapes the ground, the fix usually starts with the post and hinge, not the gate leaf itself. See Gate Repair in Gladeview for what we cover.
Electric Gate Repair in Gladeview
Automatic gates in Gladeview fail in predictable ways: control boards get zapped by summer lightning storms, safety sensors get knocked out of alignment, loops stop detecting vehicles, and motors burn out from gates that bind on rusty hinges. We diagnose at the component level, checking the motor, board, sensors, loop wiring, and remotes rather than assuming the whole opener needs replacing. On many older Gladeview gates, the opener is fine and the problem is the gate itself binding. See Electric Gate Repair in Gladeview for what we check and fix.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Gladeview
Gate installation in Gladeview is shaped by the neighborhood’s older housing stock and the South Florida climate. Most jobs involve replacing a worn gate on an existing concrete-block or stucco ranch house, or adding a gate to a driveway that never had one. The soil, salt air, and hurricane wind loads mean post depth, concrete anchoring, and hinge sizing matter more than the gate leaf itself. A gate installed with shallow posts or the wrong hardware here will fail within a few seasons. We handle the whole job: remove or modify the old setup, set posts deep, hang the new gate square, add the operator if it is automatic, and make sure it swings or slides clean through the full range of travel. For the complete service details, see Gate Installation.
Automatic Gate Installation
Signs you need it
You are done opening and closing a heavy gate by hand, or you want controlled access to your driveway without running conduit and wiring to a generalist who does not know swing geometry.
What it costs in Gladeview
Single swing gate operators typically run $1,800 to $3,200 per leaf installed, while slide gate operators run $2,000 to $3,500 per leaf installed in Gladeview.
How we do it
We confirm post strength and gate weight, mount the operator, wire the control board and safety sensors, set travel limits, and program remotes and keypads.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is leaning, rusted through, or too light to hang an operator on, and the posts are still sound enough to reuse or replace.
What it costs in Gladeview
Driveway gate installation in Gladeview generally falls between $1,500 and $4,000 depending on gate type, material, and whether you are keeping the existing posts.
How we do it
We survey the driveway width and set at least two posts below the frost line with proper concrete, then mount the gate, align hinges, and set the latch or operator.
Sliding Gate Installation
Signs you need it
Your driveway slopes, or the swing radius would eat too much parking space, or you want a sturdier gate that handles wind better than a wide swing leaf.
What it costs in Gladeview
Sliding gate installation in Gladeview typically starts around $2,000 and runs to $4,500 for a steel gate and track assembly with the operator installed.
How we do it
We pour a level track pad, set the track, hang the gate on rollers, and tune the stops so the gate slides cleanly without binding or jumping the track.
What Gate Installation Costs in Gladeview
| Item | Typical range in Gladeview |
|---|---|
| Single swing gate operator | $1,800 – $3,200 per leaf |
| Slide gate operator | $2,000 – $3,500 per leaf |
| Driveway gate installation | $1,500 – $4,000 |
Does a new gate in Gladeview need to be hurricane-rated?
There is no universal code requirement for a hurricane-rated residential gate in unincorporated Miami-Dade, but posts, hinges, and braces have to stand up to wind load. We anchor posts for the site, accounting for the gate’s wind surface and soil conditions.
Can you install a gate operator on my existing Gladeview gate?
Sometimes. We check the gate weight, post condition, and swing clearance first. If the gate binds or the posts flex, the operator will fail early. We will tell you honestly whether the existing gate is worth automating or should be replaced. Call (833) 570-5807 to set up a look.
Brands We Service in Gladeview
We work across the major automatic gate platforms, including Ghost Controls, DoorKing, Elite, and Mighty Mule, plus several others. That matters in Gladeview because old gates carry old hardware. We keep common retrofit parts for most major operators on the truck, which keeps many Gladeview repairs from turning into multi-week waits on shipping. See our brands for the systems we cover.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Gladeview, FL
| Service | Typical range in Gladeview |
|---|---|
| Gate hinge replacement or repair | $150 – $400 |
| Gate post reinforcement or replacement | $300 – $800 |
| Sagging gate realignment and hardware | $200 – $500 |
| Gate welded repair (steel or iron) | $150 – $500 |
| Electric gate diagnostic visit | $75 – $125 |
| Circuit board replacement | $250 – $700 |
| Safety sensor or photo eye repair | $150 – $350 |
| Gate opener motor replacement | $400 – $900 |
| Slide gate operator installation | $2,000 – $3,500 per leaf |
| Single swing gate operator installation | $1,800 – $3,200 per leaf |
| Driveway gate installation | $1,500 – $4,000 |
| Automatic gate installation, complete | $3,000 – $7,500 |
In Gladeview, the two biggest variables are post condition and rust. If the posts need replacing and the gate frame needs welding before an operator goes on, the job moves toward the top of the range. Wherever the number lands, we agree on the price before we start, and you will not see a larger invoice at the end.
Neighborhoods We Serve in Gladeview
Gladeview is compact, but we work the whole 33147 zip code and the surrounding unincorporated pockets. Most jobs are within a short drive of our Miami base, which means we can usually schedule a look quickly rather than sending you weeks out.
- Central Gladeview
- The residential blocks east of NW 27th Avenue
- The streets north of NW 71st Street
- The single-family lots near Martin Luther King Jr. Boulevard
- The western edge of Gladeview toward Brown Sub
Service Area – Cities Near Gladeview
If you are just outside Gladeview, we cover those streets too. Our regular area includes West Little River, FL, El Portal, FL, Pinewood, FL, and Westview, FL. The gate problems in these neighborhoods are nearly identical to Gladeview’s: older homes, fenced lots, humidity, and storm wear on posts and hardware.
Serving Gladeview, FL — Our Local Coverage Area
We’re based in the Gladeview area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Gladeview
We are Miami-based and Gladeview is close to our home base, so scheduling is usually days, not weeks, for most repairs. If you have a gate that will not close, call (833) 570-5807 and we will tell you honestly when we can be there.
Both. Gladeview is mostly single-family homes, but we service small commercial lots, multi-unit driveways, and church or community gates in and around the neighborhood. The diagnosis process is the same, but with heavier cycles we spec operators and hinges for continuous duty.
Replacing a gate on existing posts generally does not require a permit in unincorporated Miami-Dade, but adding a foundation or electrical run can. We can advise on what your specific job will involve before any work is scheduled. Call (833) 570-5807 and we will walk you through it.
If your Gladeview gate is sagging, rusted, or stubborn to open, call Miami Gate Company at (833) 570-5807 for a free estimate. We will look at the gate, the posts, and the operator, tell you exactly what it needs, and give you a price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Gladeview Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Javier Mendoza"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Ramon Salazar"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Bryant