Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pinewood, FL
Gate installation in Pinewood means working with Miami-Dade’s hurricane wind-load codes, salt-laden air off Biscayne Bay, and a housing stock that ranges from 1950s concrete-block homes to newer infill townhomes. We install sliding gates, swing gates, and automated systems built for this specific environment, not a generic template. Miami Gate Company has served Pinewood since 2012, and we’re the gate-only specialist homeowners call when a driveway gate needs to hold up through storm season and operate every single day. Call (833) 570-5807 for a free estimate.
Why Pinewood Homes Are Different
Pinewood sits close enough to Biscayne Bay that salt spray works its way into gate hardware year-round. Hinges corrode faster here than they do ten miles inland. Operator housings get pitted. Decorative steel develops rust blooms along welds and bolt holes within a few seasons if the finish wasn’t designed for coastal exposure. That alone changes how we approach gate work in the 33167 ZIP code.
The housing stock compounds it. The older blocks off NW 7th Avenue still have their original galvanized chain-link gates and manual sliders from the 1960s and 1970s. Those gates are simple, but simple doesn’t mean immune: the posts settle, the slider wheels grind flat, and the galvanizing eventually fails at the cut ends. Meanwhile, the post-1992 subdivisions built after Hurricane Andrew are full of metal and vinyl driveway gates on masonry fences, and those have their own problem. Many were repaired cheaply after a storm, so we regularly find impact-rated hinges mixed with standard hardware, or reinforced posts with non-reinforced brackets. In Pinewood, mismatched hardware is one of the most common reasons a gate fails inspection or binds up under load.
The rainy season from May to October keeps moisture in the soil around gate posts. Concrete footings that were adequate in drier weather can shift when the ground saturates, which is why a gate that opened fine in April starts dragging in June. We account for that in how we size footings and set posts.
Styles & brands we work with
Our Main Pinewood Services
Most Pinewood calls fall into two categories: a gate that has physically stopped working, and an electric gate whose automation has failed. Here’s what each involves in the 33167 area.
Gate Repair in Pinewood
Pinewood gate repair usually comes down to corrosion, storm damage, or years of accumulated wear on a gate that was never adjusted properly. We replace bent hinges, rebuild sagging gates, cut out rusted steel and weld in new sections, and reset posts that have shifted in saturated soil. On chain-link sliders, the common failures are flattened roller wheels, stretched chain, and posts that have leaned out of plumb. We carry the hardware to fix those on the first trip, and we quote the full price before any work starts. Gate Repair in Pinewood is a service we’ve provided since 2012.
Electric Gate Repair in Pinewood
Electric gates fail differently than manual gates because the problem is rarely just mechanical. Salt air corrodes wire connections inside control boxes. Humidity shortens the life of circuit boards. Storm surges and power flickers cook capacitor and transformer components. We diagnose the motor, the control board, the safety sensors, the loop detectors, and the wiring, not just the part that stopped moving. If your gate opens but won’t close, or operates intermittently after rain, that’s an automation issue, and it needs a gate specialist. Electric Gate Repair in Pinewood is one of our most requested services.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Pinewood
Gate installation in Pinewood is a different job than in most Florida cities because of what the county requires and what the climate does. Any new gate has to meet Miami-Dade wind-load requirements, which typically means impact-rated hinges, reinforced posts set deeper than standard, and structural members sized for hurricane uplift. We size every component for the specific gate width, height, and exposure, and we install automated and manual gates that will still open and close properly ten years and a dozen storm seasons from now. For complete details on the full scope of work, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy gate by hand multiple times a day, or you have a manual gate on a property that needs controlled access.
What it costs in Pinewood
Automatic gate operators for residential systems in Pinewood typically run $850 – $3,000 for the operator and hardware, plus the cost of the gate itself and the electrical run.
How we do it
We assess the gate’s weight and track, install the operator and mounting hardware, run the control wiring, add safety sensors and loop detectors, and test the complete system under load.
Driveway Gate Installation
Signs you need it
You don’t have a gate but want one, or your current driveway gate is rusted, sagging, or too light for Miami-Dade wind loads.
What it costs in Pinewood
New driveway gate systems in Pinewood, including the gate, posts, and hardware, typically fall between $3,200 and $7,500 depending on width, material, and automation.
How we do it
We measure the driveway opening, pour and set reinforced posts, fabricate or source a gate sized for the wind-load requirements, hang it, and install the automation or manual hardware.
Sliding Gate Installation
Signs you need it
Your driveway has a grade change, limited swing clearance, or an existing sliding track that has failed.
What it costs in Pinewood
Sliding gate packages in the 33167 area typically range from $3,800 to $8,500 including the track, rollers, gate, and operator hardware.
How we do it
We set and level the track, hang the gate on roller assemblies, align the chain or rack, install the receiver post, and automate the system if requested.
Electric Gate Installation
Signs you need it
You’re installing a new gate and want automation from day one, or you have an existing manual gate that’s heavy enough to justify conversion.
What it costs in Pinewood
Electric gate installation in Pinewood, combining a gate with automation, safety edges, and a loop detector, typically lands between $2,800 and $7,000 depending on the gate size and operator type.
How we do it
We install the gate structure first, then mount the operator, pull the low-voltage wiring, set up the control board and remotes, and run full safety testing before handing it over.
What Gate Installation Costs in Pinewood
| Item | Typical range in Pinewood |
|---|---|
| Automatic gate operator (hardware only) | $850 – $3,000 |
| Complete driveway gate system (gate, posts, hardware) | $3,200 – $7,500 |
| Sliding gate package (track, gate, operator) | $3,800 – $8,500 |
Do I need a permit for a new gate in Pinewood?
Most new gate installations in Pinewood require a Miami-Dade County permit because of wind-load compliance, especially for automated systems on masonry piers. We handle the permit drawings and submittal as part of the installation.
Can you match a new gate to my existing fence in Pinewood?
Yes. We match materials and styles to existing masonry walls, chain-link runs, and metal fencing, and we can order the gate in the same finish or fabricate to complement the existing look.
Brands We Service in Pinewood
We service and install Gate Repair in Pinewood across Ghost Controls, DoorKing, Elite, and Mighty Mule systems, among others. We stock common control boards, remotes, photo eyes, and loop detectors for these brands, which means fewer return trips and faster repairs. See our brands for the full range.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pinewood, FL
| Service | Typical range in Pinewood |
|---|---|
| Gate repair (general) | $120 – $1,800 |
| Electric gate repair | $150 – $2,000 |
| Gate operator replacement | $850 – $3,000 |
| Gate opener repair | $120 – $850 |
| Driveway gate installation | $3,200 – $7,500 |
| Sliding gate installation | $3,800 – $8,500 |
| Electric gate installation | $2,800 – $7,000 |
| Automatic gate installation | $850 – $3,000 |
What pushes price up in Pinewood is usually storm hardening: impact-rated hinges, deeper footings, and heavier posts all add material and labor, but they’re not optional when the county inspectector shows up. The other factor is existing damage, where a corroded post or failed track turns a simple replacement into a rebuild. Whatever the number ends up being, we quote it clearly and agree on it before any work starts.
Neighborhoods We Serve in Pinewood
We cover the full 33167 area, including the older single-family blocks, the newer infill townhome developments, and the commercial properties along the main corridors. Most calls in Pinewood get a same-day or next-day visit, depending on the failure and how heavily the route is booked.
- NW 7th Avenue corridor
- Older subdivisions south of NW 119th Street
- Townhome enclaves near NW 111th Street
- Commercial blocks along NW 103rd Street
- Areas bordering Opa-locka to the west
Service Area – Cities Near Pinewood
Miami Gate Company serves Pinewood and the surrounding North Miami-Dade corridor. If you’re in a neighboring city, we cover that too: Westview, FL to the north, Bunche Park, FL to the east, Opa-locka, FL to the west, and Gladeview, FL to the south. Call (833) 570-5807 and we’ll get a gate specialist to your property.
Serving Pinewood, FL — Our Local Coverage Area
We’re based in the Pinewood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pinewood
For a gate that won’t open or closes unsafely, we typically reach Pinewood properties the same day or the next business day. Emergency callouts are routed first, and our local stock of common operator parts means many repairs are finished on the first visit.
Automated gates in Pinewood must have the required safety devices: photo eyes, reversing edges, and sometimes a loop detector depending on the configuration. Miami-Dade also requires wind-load compliance on structural components, which we engineer into every new installation.
Yes. We handle gate systems for HOAs, apartment buildings, and commercial properties across the 33167 ZIP code, including multi-user access control, remote programming, and scheduled maintenance. Estimates are free, and we’ll walk the property before quoting.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pinewood Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Ryan Miller"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Arjun Sharma"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Chris Norris