Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Bunche Park, FL
Gate installation in Bunche Park usually means replacing a rusted, storm-beaten driveway gate on a 1950s or 1960s concrete-block home, or adding an automatic opener to a gate that has been swung by hand for decades. Most jobs here involve hurricane-rated aluminum or wrought-iron gates on modest single-family lots, where salt air and subtropical humidity have already taken a toll on hinges, posts, and frames. Miami Gate Company has served Bunche Park since 2012, and we handle everything from a new manual gate to a full automatic system with sensors and remotes. Call (833) 570-5807 for a free estimate.
Why Bunche Park Homes Are Different
Bunche Park is unincorporated Miami-Dade, which means no city permit office and no HOA architectural board telling homeowners what their gate can look like. That freedom shows up in the hardware. We see a wild range of gate styles in this ZIP code, from clean aluminum driveway gates to patched chain-link frames and ornamental metal gates welded onto concrete posts that have shifted over the years. Many of these gates were installed by homeowners or handymen, not gate companies, so the hinges are undersized, the posts are heaving, and the latch hardware is mismatched to the frame.
The local climate works against every metal component. Salt-laden onshore air from the Atlantic, combined with South Florida’s humidity, corrodes hinges and pivot points faster than homeowners expect. Aluminum gates that looked straight five years ago are often warped by now, and concrete posts set without deep footers have a habit of leaning after a few hurricane seasons. Every repair here has to account for wind load, salt exposure, and the reality that most homeowners want a gate that still latches securely after a named storm passes through. On top of that, because Bunche Park sits between Opa-locka, Miami Gardens, and the Hialeah industrial belt, many gates open directly onto active streets where a sagging gate that drags on the driveway becomes a daily annoyance and a security issue.
Styles & brands we work with





Our Main Bunche Park Services
Homeowners in Bunche Park call us most often about two things: a gate that has physically stopped swinging, or an automatic gate whose motor runs but the gate does not move. Each has its own page below.
Gate Repair in Bunche Park
When a Bunche Park gate will not open or close, the problem is almost always mechanical before it is electrical. We find sagging hinges, bent frames, cracked concrete posts, and latch strikes that no longer line up. Salt corrosion accelerates every one of those failures, especially on older ornamental metal gates that have been repainted without the hardware being replaced. We repair the structural side first, then address alignment, then adjust any existing automation so it does not burn out its motor fighting a gate that is out of square. See Gate Repair in Bunche Park for the full breakdown.

Electric Gate Repair in Bunche Park
Automatic gates in Bunche Park sit outside in humidity and salt air year-round, which is hard on control boards, loop detectors, and wiring connections. We diagnose the motor, the board, the safety sensors, and the wiring, not just the parts that look damaged. Many systems here have been pieced together over the years, with older openers pushing newer or heavier gates they were never rated for. We work across brands so the fix matches what is actually installed. See Electric Gate Repair in Bunche Park for specifics.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Bunche Park
New gate installation in Bunche Park usually means replacing a rusted, storm-beaten driveway gate on a 1950s or 1960s concrete-block home, often with an automatic opener the homeowner never had before. The salt air, hurricane wind loads, and decades of DIY fixes mean most replacement jobs start with repairing or resetting the posts before we ever hang a new gate. We install manual and automatic gates, set posts in concrete to the right depth for wind load, and wire everything so it works the first time. Our Gate Installation service covers the whole process from measurement to final adjustment.
Automatic Gate Installation
Signs you need it
A gate you have to get out of the car to open by hand, or a gate that slams shut in the wind, is a strong sign an automatic opener would fix the daily frustration.
What it costs in Bunche Park
Automatic gate installation in Bunche Park typically runs $2,950 to $7,400 depending on gate size, opener type, and whether new wiring and safety sensors are required.
How we do it
We mount the operator, run the power, install photo-eye sensors and edge protection, set travel limits, and program remotes and keypads, then test the full cycle under load.
Driveway Gate Installation
Signs you need it
If your existing gate is rusted through at the hinges, no longer latches, or sags badly enough to drag on the driveway, replacing it with a new driveway gate is cheaper than patching it every six months.
What it costs in Bunche Park
A new driveway gate in Bunche Park, including installation, typically falls between $2,950 and $7,400 depending on material, width, and automation.
How we do it
We measure the opening, check the posts and footers, recommend a gate built for the wind load and salt exposure here, then hang it square, align the latch, and test it through full swing cycles.
Sliding Gate Installation
Signs you need it
When a swing gate does not have room to open without hitting a car, a wall, or the street, a sliding gate is the solution that keeps the driveway usable.
What it costs in Bunche Park
Sliding gate installation in Bunche Park typically starts around $4,300 and runs to $9,400 depending on the track, motor, and gate weight.
How we do it
We set the track and foundation, hang the gate, install the rack and motor, wire the safety sensors and loops, and adjust the limits so the gate does not slam or stall.
What Gate Installation Costs in Bunche Park
| Item | Typical range in Bunche Park |
|---|---|
| Driveway gate, manual, hung on existing posts | $2,950 – $4,700 |
| Automatic gate with opener, wiring, and safety sensors | $3,900 – $7,400 |
| Sliding gate with track and motor | $4,300 – $9,400 |
Do I need a permit to install a gate in Bunche Park?
Bunche Park is unincorporated Miami-Dade County, so permitting and code enforcement come from the county, not a city office. We handle the paperwork and make sure the installation meets Miami-Dade wind-load requirements before any work starts.
Can you replace a gate without replacing the posts?
Sometimes. If the existing posts are solid, plumb, and set deep enough for the new gate’s weight and wind load, we can hang the new gate on them and save you real money. Most 1950s and 1960s Bunche Park posts, however, are undersized, rusted at the base, or already leaning, and reusing them risks the new gate sagging within a year.
Brands We Service in Bunche Park
We work on automatic gate systems from Ghost Controls, DoorKing, Elite, and Mighty Mule, plus most other major brands, and we keep common boards, remotes, sensors, and hardware on the truck for faster turnarounds in Bunche Park. Being brand-agnostic means we fix what you have. See our brands page for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Bunche Park, FL
| Service | Typical range in Bunche Park |
|---|---|
| Manual driveway gate installation | $2,950 – $4,700 |
| Automatic gate installation | $3,900 – $7,400 |
| Sliding gate installation | $4,300 – $9,400 |
| Gate frame straightening and re-alignment | $300 – $600 |
| Hinge and latch replacement | $200 – $500 |
| Control board replacement | $400 – $900 |
| Motor replacement | $600 – $1,300 |
| Safety sensor and loop repair | $250 – $600 |
| Remote and keypad programming | $150 – $350 |
| Full gate replacement with new posts | $3,400 – $7,800 |
In Bunche Park, the three things that push a price toward the high end are rotted or leaning posts that must be re-set, heavier hurricane-rated gates that need a bigger operator, and jobs where the existing wiring is too old or undersized to reuse. Every quote is written before work starts, and the price you approve is the price you pay. No hidden extras after the fact.
Neighborhoods We Serve in Bunche Park
We cover all of Bunche Park and the streets that feed it, including the blocks along Northwest 27th Avenue, the residential streets off Northwest 151st Street, and the homes near the Opa-locka and Miami Gardens edges. Typical response to Bunche Park is fast because we are already running routes through this part of Miami-Dade.
- Bunche Park residential core
- Blocks along NW 27th Avenue
- Streets off NW 151st Street
- Homes near the Opa-locka line
- Homes near the Miami Gardens line
Service Area – Cities Near Bunche Park
Miami Gate Company also covers the communities next to Bunche Park. If your gate is in Opa-locka, FL, Pinewood, FL, Westview, FL, or Carol City, FL, we can usually schedule the same week and bring the same brand-agnostic parts stock with us.
Serving Bunche Park, FL — Our Local Coverage Area
We’re based in the Bunche Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Bunche Park
Because we run routes through Miami-Dade regularly, most Bunche Park calls get a technician out the same day or next day, depending on the season. Storm season backs up every gate company in South Florida, so scheduling before a hurricane watch is the smart move.
New automatic gate installations in unincorporated Miami-Dade fall under county code, specifically around wind load and safety sensors. Repairs to an existing gate rarely require anything. We can tell you which category your job falls into before any work begins.
That is common in Bunche Park, where many gates went in without permits or proper footers. We repair or re-set the posts first, then re-hang the gate, then adjust or replace the hardware. Cheap fixes on a leaning post never last, so we do not pretend they will. Call (833) 570-5807 and we will give you an honest assessment and a free written estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bunche Park Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Bethany Hayes"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Javier Mendoza"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Ramon Salazar