Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Miami, FL
Gate installation in Miami means building for salt, storms, and shifting ground – not just hanging a steel panel and bolting on an operator. We install automatic and manual gates across Miami’s full housing range, from 1920s Coral Gables wrought iron to newer sliding steel gates in Kendall and Doral. Most Miami jobs need corrosion-resistant hardware, wind-rated posts, and DC operators that keep working when FPL goes down during hurricane season. Call (833) 570-5807 and we’ll walk the site, check the soil and exposure, and give you a written number before any work starts.
Why Miami Homes Are Different
Salt-laden onshore air is the single biggest factor in Miami gate work. Year-round humidity and intense UV salt-blast every operator housing, photo-eye lens, keypad, and steel finish. Circuit boards corrode and fail far faster here than inland – we regularly replace control boards in Miami that have visible green corrosion across the terminals within three or four years of installation. The June-through-November storm season layers on wind-driven rain, power outages, and debris that jams tracks and floods low-mounted control boxes.
Miami’s housing stock spans 1920s-through-1950s homes in Coral Gables and Little Havana sitting behind decorative wrought-iron and masonry-pillar gates, plus newer gated communities across Kendall, Doral, and Homestead with heavier sliding steel gates and swing operators. Many of those older properties sit on coral-rock or high-water-table ground that shifts and racks gate posts out of plumb, which binds tracks and hinges. After any named storm – and plenty of unnamed summer squalls – we get a wave of calls for gates stuck half-open because the operator’s battery backup drained or the limit switches got knocked off. Older Coral Gables iron gates also show salt pitting at the bottom rails where ground splash hits, and that pitting weakens the rail over time.
Styles & brands we work with
Our Main Miami Services
Most Miami property owners call us about one of two things: a gate that stopped moving or an electric operator that’s acting erratically. Both are specialist jobs here because of the salt and the storm exposure.
Gate Repair in Miami
Miami gate repair is as much about post-storm recovery and corrosion-driven failure as it is about latches and hinges. We handle bent tracks, rusted hinges, sagging gates, broken wheels, and posts knocked out of plumb by shifting coral-rock soil. On older Coral Gables and Little Havana properties, we often find salt pitting at the bottom rails where ground splash has eaten through the steel. We work on virtually any gate system – whatever brand you have, we know it. That’s the full picture on Gate Repair in Miami.
Electric Gate Repair in Miami
Electric gate acting up? We diagnose the motor, board, sensors, and wiring – not just the obvious parts. In Miami, the usual culprits are corrosion on control board terminals, salt-caked photo-eye lenses, drained battery backups after a storm, and limit switches knocked off by wind gusts. Most Miami electric gates run on 12V or 24V DC solar-or-battery operators, which changes the diagnosis compared to an AC system. We’re trained across LiftMaster, FAAC, BFT, DoorKing, Elite, Ghost Controls, Mighty Mule, Linear, and Viking. See Electric Gate Repair in Miami for the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Miami
Gate installation in Miami starts with two questions: what’s the wind exposure, and how close is the salt. Every operator, hinge, and post choice follows from those answers. A new gate on a 1920s Coral Gables masonry-pillar driveway has different engineering needs than a sliding steel gate in a Doral HOA – the first fights corrosion on decorative iron, the second needs wind-rated track and a DC operator that survives power loss. Our team handles the full lifecycle: first-time installation, mid-life repair, and system replacement – one specialist for Gate Installation, repair, and everything in between.
Automatic Gate Installation
Signs you need it
You’re done getting out of the car to open a manual gate, or your current operator fails intermittently and the cost to keep it alive no longer makes sense.
What it costs in Miami
Automatic gate installation in Miami typically runs $3,200 to $8,900 depending on gate size, operator type, and whether we’re running power or adding solar.
How we do it
We set or repair the posts, hang and align the gate, mount the operator and safety edges, run low-voltage wiring or configure solar, and program remotes and keypads before testing full travel.
Driveway Gate Installation
Signs you need it
You have a driveway opening that needs a gate built to fit it – whether a new build or a replacement for a gate that’s rusted through or racked beyond repair.
What it costs in Miami
A new driveway gate in Miami runs $2,400 to $7,800 installed, with the spread driven by gate length, material, and whether it’s swing or slide.
How we do it
We measure the opening, check post depth and soil condition, fabricate or order the gate to fit, set or reinforce the posts, hang it, and level the travel.
Sliding Gate Installation
Signs you need it
Your driveway slopes, your setback is tight, or a swing gate would fight the wind every time it opened.
What it costs in Miami
Sliding gate installation in Miami ranges $3,500 to $9,200 including track, gate panel, and automation, with heavier wind-rated panels at the upper end.
How we do it
We lay a level track bed, set the gate and rollers, mount the operator and rack, install safety edges and photo eyes, and test the full open-close cycle under load.
What Gate Installation Costs in Miami
| Item | Typical range in Miami |
|---|---|
| Driveway gate installation | $2,400 – $7,800 |
| Automatic gate installation | $3,200 – $8,900 |
| Sliding gate installation | $3,500 – $9,200 |
Salt-resistant hardware and wind-rated panels push Miami installs toward the upper end of those ranges. We quote the full number before any work begins, and that number doesn’t change unless you change the scope.
Do I need a permit for a gate installation in Miami?
Most Miami-area municipalities and HOAs require a permit or approval for a new automatic gate, especially where the gate crosses a public right-of-way or affects drainage. Call (833) 570-5807 and we’ll walk through what applies to your property.
How long does a Miami gate installation take?
A standard driveway gate install is usually one full day on-site, with automatic systems taking two when we’re running power or configuring solar. Custom or coral-rock post work can extend that. Call (833) 570-5807 for a timeline based on your opening.
Brands We Service in Miami
We’re brand-agnostic, which means we fix what you have instead of pushing a replacement from a single manufacturer. Our techs are trained across nine operator brands, including DoorKing, Elite, Ghost Controls, and Mighty Mule, and we stock common Miami-failure parts locally – corrosion-prone control boards, photo eyes, and limit switches move fast here because the salt air kills them faster than most suppliers expect. That local stock keeps turnaround tight. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Miami, FL
| Service | Typical range in Miami |
|---|---|
| Gate repair service call | $75 – $150 |
| Gate opener repair | $200 – $600 |
| Gate sensor replacement | $150 – $350 |
| Gate track repair | $150 – $400 |
| Electric gate repair | $250 – $800 |
| Driveway gate installation | $2,400 – $7,800 |
| Automatic gate installation | $3,200 – $8,900 |
| Sliding gate installation | $3,500 – $9,200 |
Salt corrosion and storm damage are the two biggest price drivers in Miami – a board that’s been sitting in humid salt air for three years fails differently than one in Orlando, and a wind-racked post means realignment before any new hardware goes on. Whatever the number, we agree on it before work starts, and that’s the number on the invoice.
Neighborhoods We Serve in Miami
We work across Miami and the surrounding cities, from the older iron gates of Coral Gables and Little Havana to the gated communities of Kendall, Doral, and Homestead. Response time across the metro runs on the same schedule as our Miami crews – if you’re inside the service area, we’ll get a tech out without a second dispatch fee.
- Coral Gables
- Little Havana
- Kendall
- Doral
- Homestead
Service Area – Cities Near Miami
Miami Gate Company serves the full metro, including neighbors like Allapattah, FL, Brownsville, FL, Coconut Grove, FL, and Coral Gables, FL. If your gate is on the fritz and you’re anywhere near Miami, we’ll come take a look.
Serving Miami, FL — Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Miami
Most Miami repair calls get a tech out within one business day, and we batch emergency post-storm calls by neighborhood so we can clear the queue faster. Call (833) 570-5807 early if you can – post-storm slots go fast.
Many Miami gated communities and HOAs require written approval before any gate modification, especially for automatic operators and new installations. We can provide the spec sheet and drawings your HOA board will ask for – just mention it when you call.
Yes. We service sliding steel gates and swing operators for Miami office parks, warehouses, and apartment buildings, including loop detectors, keypads, and access control integration. Commercial or residential, gates are all we do.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Miami Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Bryant"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Ryan Miller"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Arjun Sharma