Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Pinewood
An electric gate that won’t open, grinds halfway, or trips the breaker every time it rains isn’t something you can put off in Pinewood. We get it. Miami Gate Company repairs automatic gate systems throughout the 33167 zip code, and we know exactly what older Pinewood properties throw at a gate operator: humidity, salt air, aging control boards, and hardware that was never right in the first place. Call (833) 570-5807 and we’ll send a gate specialist who has worked on hundreds of systems just like yours, from the 1950s concrete-block homes near NW 7th Avenue to the newer hurricane-code subdivisions.
Why Miami Gate Company Is Pinewood’s Preferred Electric Gate Repair Company
Gates are all we do. That focus shows when a Pinewood homeowner calls us about a LiftMaster that stalls mid-cycle or a Mighty Mule that won’t respond to the remote. Our techs are trained across nine major operator brands, so we diagnose what your system actually needs rather than what we happen to sell. Ruben Castellano built Miami Gate Company around brand-agnostic repair for exactly this reason: older Pinewood gates often mix hardware from different eras and manufacturers, and a specialist who only knows one ecosystem will misdiagnose it.
Most of our Pinewood work comes from referrals, because word travels fast when a gate finally works after two other companies failed to fix it. We service the neighborhoods off NW 7th Avenue, NW 103rd Street, and the blocks around Pinewood Park regularly. Our techs know which subdivisions have pre-1990s operators, which ones got cheap storm-season repairs, and which entry systems the HOAs around Pinewood actually use. That local knowledge cuts diagnosis time in half.
Styles & brands we work with
Automatic Gate Repair in Pinewood
Automatic Gate Repair in Pinewood usually means one of three things: a swing gate that sags and binds, a slide gate that grinds along its track, or a control board that no longer talks to the remote, keypad, or safety sensors. Around here, the age of the system matters a lot. A 1980s operator on a chain-link gate off NW 7th Avenue needs a different approach than a 2015 hurricane-code swing gate on a newer infill townhome. We repair the motor, board, sensors, and wiring at the component level, not just the visible parts.
Swing Gate Repairs for Older Pinewood Properties
Swing gates on 1950s and 1960s homes often fail at the hinge post footing. Concrete in Pinewood’s subtropical climate absorbs moisture, steel hardware corrodes, and the gate panel sags until the operator strains to move it. We correct the sag, replace worn hinges, and only then assess whether the motor itself is actually the problem. Most of the time it isn’t, which is why a gate-only specialist saves Pinewood homeowners real money.
Slide Gate and Track Work
Slide gates collect sand, leaves, and storm debris in the track, especially during the May through October rainy season. When a slide gate binds, the motor pulls more current and eventually burns out. We clean and realign the track, replace worn rollers, and repair the operator. If storm-blown debris bent the track itself, we’ll tell you straight and replace what needs replacing.
Electric Gate Motor in Pinewood
Electric Gate Motor replacement in Pinewood isn’t always the right first move, and we’re honest about that. A motor that stalls halfway or trips the breaker often has a mechanical cause: a sagging panel, a rusted hinge, a misaligned track. But when the motor itself is burned out, seized, or undersized for the gate it’s driving, we replace it with a modern unit matched to the panel weight and cycle frequency. On pre-1990s systems, that motor swap usually requires a control board retrofit too, because the old board won’t talk to a new motor properly.
Motor Diagnosis Without the Guesswork
We test amperage draw, capacitor condition, and limit switch function before recommending any motor work. In Pinewood’s humidity, motors fail faster than they should when the cabinet seal has degraded or the operator cover doesn’t close tight. We check all of that, not just whether the motor spins.
When a Retrofit Beats a Full Replacement
A 30-year-old gate doesn’t always need a full system replacement. We regularly retrofit older operators with modern control boards, add safety photocells, and upgrade wiring, which brings the system up to current UL 325 entrapment protection standards at half the cost of a complete new install. We’ll show you both options with real numbers before any work starts.
Trusted Brands We Service in Pinewood
We work on virtually any gate system, whatever brand you have, we know it. Our Pinewood truck stock includes boards, sensors, remote receivers, and limit switches for DoorKing, Elite, and Ghost Controls, the three brands we see most often on older and mid-range Pinewood systems. That local parts availability means faster turnaround for residential and commercial customers across 33167. If you have a FAAC or BFT operator, we have dealer-level training on those too. Brand-agnostic means we fix what you have, not sell you a system you don’t need.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Pinewood Homes
- Obsolete control boards from pre-1990s operators. Humidity and salt corrosion shorten these boards’ lives. The failure shows up as erratic opening, no response from remotes, or complete lockup. A retrofit board with modern safety logic is usually the fix.
- Worn hinge posts and footings on older swing gates. Masonry and concrete posts shift over decades in Pinewood’s soil. The panel sags, the operator binds, and the motor burns out trying to push a gate it was never meant to carry.
- Missing or bypassed safety photocells. Many older Pinewood gates were installed before UL 325 entrapment protection was standard. We routinely find bypassed photocells and obsolete wiring that must be corrected before any motor repair can be signed off.
- Mismatched hardware from cheap storm-season repairs. An undersized hinge or a gate hung on the wrong post leads to repeated breakdowns. We fix the underlying issue so you’re not calling us back every six months.
Pricing for Electric Gate Repair in Pinewood, FL
A typical gate motor repair in Pinewood runs $275 to $550 for a swing or slide gate operator, depending on whether we replace the control board, capacitor, limit switch, or the motor itself. A full control board retrofit on a pre-1990s system usually lands between $450 and $800 including the new board, photocells, and wiring. Gate opener repairs involving remote receivers or keypads sit in the $150 to $300 range. Safety sensor repair or replacement is $120 to $240 per pair. Before any work begins, we quote the exact price and you approve it. That’s how we do every Pinewood job. Call (833) 570-5807 for a free estimate.
We Also Serve Cities Near Pinewood
Miami Gate Company provides Electric Gate Repair across northern Miami-Dade, including Westview, Bunche Park, Opa-locka, and Gladeview. If you’re a property manager with gates in multiple nearby cities, one call covers all of them. Learn more about our work in the area on our Pinewood page.
Serving Pinewood, FL — Our Local Coverage Area
We’re based in the Pinewood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Pinewood
You can often replace just the motor, but the control board will usually need to be swapped at the same time because 1980s boards don’t communicate with modern motors. A retrofit kit plus a correctly sized motor typically costs $700 to $1,100 in Pinewood, while a full new operator system runs $2,000 to $4,500 depending on gate size and whether you need new posts. We’ll show you both paths with pricing before you decide. Call (833) 570-5807 for an exact quote, estimates are free.
Rain in Pinewood gets into the operator cabinet through degraded seals, corroded conduit fittings, or cracked covers, and the resulting moisture creates a short that trips the breaker. We fix the water entry point first, then repair or replace whatever the water damaged. Leaving it alone means the breaker keeps tripping and the motor eventually fails for good. Call (833) 570-5807 and we’ll diagnose it.
Look for photocells at the gate openings and a reversing edge or similar entrapment sensor on the leading edge of the gate panel. If you don’t see them, or if the gate doesn’t reverse when you block the beam, your system likely predates UL 325 or the safety devices were bypassed. We check this on every Pinewood repair job, because an unsafe gate is a liability for homeowners and HOAs alike.
No. If the gate is hard to push manually, the problem is mechanical: a bent track, rusted rollers, or debris packed into the channel. Installing a new motor without fixing the track will just burn out the new one. We correct the mechanical issue first, then test the existing motor to see if it actually needs replacement. In Pinewood, this two-step approach saves hundreds of dollars over a motor-first repair.
Yes. The chain-link gates on older Pinewood blocks off NW 7th Avenue are still serviceable with modern operators. We replace the old operator with a current slide-gate motor, add the safety photocells and reversing edge that were never installed, and weld or bolt new mounting plates to the existing track frame. The gate keeps its character, but it meets current safety and electrical standards. Call (833) 570-5807 to schedule an inspection.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Pinewood and northern Miami-Dade.