Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Weston
If your gate won’t open, sags at the hinge, or stops midway through its cycle, you need a specialist who understands Weston’s specific gate repair landscape. Most gate problems in Weston trace back to three things: builder-grade operators hitting end-of-life, missing power runs on gates installed manual, and corrosion from subtropical humidity eating electronics. Miami Gate Company handles all of it, from component-level diagnosis to full operator replacement with HOA-compliant parts. Call (833) 570-5807 and we’ll have a gate technician in Weston the same day.
Why Miami Gate Company Is Weston’s Preferred Gate Repair Company
Gates are all we do. No fencing side work, no garage door calls, no split attention. Every technician on our team is trained specifically on gate mechanics and automation across at least nine major brands, so when a Weston homeowner calls with a Ghost Controls opener that won’t respond or a DoorKing swing arm that grinds, we know the failure mode before we arrive.
Weston presents a particular challenge most generalist contractors miss. Nearly every village here is HOA-governed, which means a gate repair is also a compliance job. Our crews carry manufacturer spec sheets and color-match cards to every Weston call because we understand that a replacement operator has to satisfy the community’s architectural review board, not just fix the mechanical problem. Ruben Castellano, who leads Miami Gate Company, built the business around this kind of brand-agnostic, documentation-ready repair work. Weston homeowners have come to expect it from us.
Styles & brands we work with
Sliding Gate Repair in Weston
Sliding gate repair in Weston usually comes down to one of three failures: a track that’s been knocked out of alignment by shifting ground, a chain or belt drive that’s stretched past adjustment, or a control board that’s taken a lightning surge during a summer storm. Homes in Weston’s Mediterranean-style villages, especially those built in the late 1980s and 1990s, often have sliding driveway gates that have been in service 25 to 35 years. The operators on those gates were builder-spec from the original development, and most have outlived their design life by a decade or more.
Track And Roller Alignment
Weston’s soil shifts with seasonal rain patterns, which gradually moves gate tracks and posts. When a sliding gate starts scraping or binds halfway through its travel, the fix often involves resetting the track, replacing worn rollers, and re-leveling the post that carries the load. A typical alignment job in Weston runs $180 to $420 depending on how far the track has moved.
Operator And Drive Replacement
When the motor or drive mechanism fails on a sliding gate, repair may not be the right call. A builder-grade operator from the 2000s that’s already been repaired twice is usually cheaper to replace than to resurrect. Sliding gate operator replacement in Weston typically runs $950 to $2,600 installed, and that price includes reprogramming remotes, setting safety limits, and matching the replacement to HOA specs where required.
Wrought Iron Gate Repair in Weston
Wrought iron gate repair in Weston is driven by two forces: rust and sag. Weston’s subtropical climate puts salt-laden air on every iron surface, and gates that face east toward coastal breezes rust faster than those on the west side of a property. We regularly see hinge welds that have thinned to less than half their original thickness on 20-year-old gates, and that’s not a cosmetic issue; it’s a structural one.
Weld Repair And Rust Remediation
On steel and wrought-iron driveway gates, we grind out corroded weld points, re-weld the joints, and treat the repaired area with rust-inhibiting primer and a top coat matched to the gate’s existing finish. Weld repairs typically run $150 to $400 per hinge or joint, depending on access and how much steel has to be replaced. In Weston, it’s common for us to repair two or three hinges at once because corrosion spreads evenly across the gate.
Gate Realignment And Sag Correction
A gate that drags on the driveway usually has a failing post more than a failing hinge. Once the concrete or steel post loses its grip, tightening the hinge only buys a few weeks. We reset posts in new concrete, re-weld the hinge mounts, and hang the gate so it swings clean. Post reset work in Weston runs $450 to $900 per post, and it is the most common fix for gates that have sagged for years on an original builder-installed footing.
Trusted Brands We Service in Weston
We work on virtually any gate system, whatever brand you have, we know it. The team is trained across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we are not tied to a single manufacturer’s repair pathway. For Weston homeowners with Ghost Controls or Elite swing arm systems, that means diagnosis at the component level, not a scripted replacement pitch. We stock common parts locally for Weston-area calls, and when a spec sheet or color match is needed for an HOA review, we provide it.
Common Gate Repair Problems We See in Weston Homes
- Manual gates that were never automated at build. Many Weston home sites originally got manual driveway or pool gates because the developer did not run power or conduit to the post. Automating them later means trenching, conduit, a new operator, and often a post upgrade to handle the motor’s force. We did exactly this at a village off Weston Road on a late-1990s Mediterranean home: fresh conduit and power to the manual side gate, a new post footing to kill the sag, and a FAAC operator with spec sheet submitted to the ARB before install.
- Builder-grade swing gate operators hitting end-of-life. Weston’s original developments are now 15 to 35 years old, and the original LiftMaster and BFT swing operators are failing in clusters. Photo-eye corrosion, board burnout, and stripped gearboxes are the top three symptoms. When one fails in a neighborhood, we often get a second call from a neighbor two streets over within a month.
- Summer lightning surges frying control boards. Weston’s afternoon thunderstorms from June through September are frequent and electrical. Gate control boards and safety photocells are the most surge-sensitive parts on the property, and a repair call after a storm almost always points to the board or the loop detector.
- HOA-driven part matching that stalls repairs. A gate repair in Weston is often waiting on an ARB approval, not a part. We have had crews on site with a workable operator that could not be installed because the spec did not match the community’s approved list. Carrying spec sheets and color cards, and knowing which Weston villages require them up front, keeps the job moving without a violation notice on the homeowner’s door.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Weston, FL
Here is what we see in Weston’s market. Hinge and weld repairs run $150 to $400 per joint. Gate realignment, including resetting a post, runs $450 to $900 per post. Sliding gate operator replacement runs $950 to $2,600 installed. Swing gate operator replacement runs $800 to $1,900. Adding automation to a manual gate, including power run, conduit, operator, and safety sensors, runs $2,200 to $4,800 depending on trench distance and operator type. Every job in Weston is quoted and agreed in writing before any work starts. Call (833) 570-5807 for a free estimate, and we will tell you the exact price range for your gate and your village’s HOA requirements.
We Also Serve Cities Near Weston
Our Gate Repair team covers Weston and the surrounding area, including Southwest Ranches, Sunshine Ranches, Cooper City, and Pine Island Ridge. If you live in one of these communities and need a gate specialist who can handle the repair and the HOA paperwork, call us at (833) 570-5807.
Serving Weston, FL — Our Local Coverage Area
We’re based in the Weston area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Weston
Yes, a manual gate in Weston can be automated, but the real job is the power and conduit run that never went in at build. You need a trench from the nearest electrical source to the gate post, weatherproof conduit, a dedicated circuit, a new operator with an HOA-approved spec, safety sensors, and often a new post footing to handle the motor’s force. In Weston, bringing automation to a manual gate typically costs $2,200 to $4,800. Call (833) 570-5807 and we will tell you exactly what your property needs.
In most Weston villages, yes when the repair changes the gate’s appearance or swaps the operator. Replacement operators, and even paint colors, must match the community architectural review board’s approved standards. We carry manufacturer spec sheets and color-match cards to the job, and in many cases the ARB approval or HOA letter arrives before our crew does. If you are not sure what your village requires, call us and we will tell you what to request.
Because the post is failing, not the hinge. Weston’s soil expands and contracts with seasonal rain, which loosens post footings over time, especially on gates built in the 1990s and 2000s. Once the post loses its grip, tightening the hinge only shifts the problem. The fix is to reset the post in new concrete and re-hang the gate. In Weston, this runs $450 to $900 per post.
Yes. Any automatic gate in Weston is covered by the same UL 325 safety standard as the rest of Florida, which requires photo-eye sensors and obstruction detection on every automated gate. If your sensors are missing, damaged, or bypassed, the gate is out of compliance and unsafe. We can test, repair, or replace photocells as part of any gate repair call.
Lightning surges and humidity. Weston’s summer thunderstorms produce frequent electrical surges that damage control boards, and year-round humidity corrodes the connections and components inside the operator housing. The electronics fail long before the gate steel does. If your gate stopped working after a storm, the board is the first thing we check. Call (833) 570-5807 and we can have a technician out today.
Contact Miami Gate Company in Weston
If your gate is down, sagging, or acting erratically, call Ruben Castellano and the Miami Gate Company team at (833) 570-5807. We give free estimates, quote every job in writing before work begins, and handle the HOA documentation that Weston gate repairs require. We serve all of Weston, including ZIP code 33327, and the surrounding communities.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Weston and South Florida.