Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pembroke Pines, FL
Gate installation in Pembroke Pines usually means matching an HOA-approved style, color, and operator to a 1980s-through-2000s subdivision lot, then building it to survive South Florida humidity and hurricane gusts. We’re Miami Gate Company, and we’ve served Pembroke Pines since 2012. We handle the full job: concrete pads, aluminum or ornamental steel fabrication, operator wiring, safety loops, and final inspection. If you’re calling about a gate that won’t open or an install you’ve been putting off, call (833) 570-5807 and describe what you’re seeing.
Why Pembroke Pines Homes Are Different
Pembroke Pines is a master-planned, HOA-dominated suburb. That changes gate work in ways most contractors never think about. Nearly every driveway gate, pool gate, and community entry gate sits under deed restrictions and architectural review. Repair or replacement isn’t just a hardware decision, it’s a compliance decision. In communities like SilverLakes, Chapel Trail, and Pembroke Falls, a mismatched gate panel or the wrong paint code gets rejected before the old gate is even hauled away. We keep approved color codes and supplier specs on file for these neighborhoods so the parts we order pass review the first time.
The housing stock itself is another factor. Most of the city built out from the 1980s through the 2000s. That means aluminum and ornamental steel driveway and pool enclosures on concrete pads, many with original slide-gate operators now 15 to 25 years old. Those operators are reaching the point where control boards fail and motors burn out from years of corrosion and heat. And the climate never lets up: salt-laden air, humidity, and hurricane-season wind loads corrode hinges and chains fast. Gates here need bracing and anchoring that can take a tropical-storm gust, which is exactly where we see failures after every named storm.
Styles & brands we work with
Our Main Pembroke Pines Services
Two jobs dominate the calls we get from Pembroke Pines: mechanical gate repair and electric gate repair. Both are covered by dedicated Pembroke Pines pages, so start there if one of these sounds like your problem.
Gate Repair in Pembroke Pines
Gate repair here usually involves roller replacement, hinge rebuilds, chain tensioning, welding cracks in ornamental steel, or realigning a gate that’s sagging off its concrete anchors. HOA communities see a lot of slide-gate hardware wear from daily cycling. In Pembroke Pines, salt air accelerates corrosion on chain drives and operator housings, so we inspect every moving part rather than just the symptom that got your attention. Read the full breakdown at Gate Repair in Pembroke Pines.
Electric Gate Repair in Pembroke Pines
Electric gate repair in Pembroke Pines means diagnosing the motor, control board, safety sensors, loop detectors, and wiring, not just swapping a battery. Most of the systems we repair here are slide operators in 15-to-25-year-old installations. Humidity gets into board enclosures and corrodes terminals. We troubleshoot at the component level across LiftMaster, FAAC, BFT, and other major brands. Full details are on Electric Gate Repair in Pembroke Pines.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Pembroke Pines
Gate installation in Pembroke Pines starts with a question most contractors skip: what will your HOA architectural review board actually approve? In 33028 especially, boards routinely reject mismatched replacement panels or colors, so we begin by matching your community’s approved specs before anything gets ordered. Then we build for the climate: galvanized and powder-coated surfaces, sealed operator housings, and bracing that holds up to hurricane-season wind loads. If you’re replacing a gate from the 1980s or 1990s, the operator almost certainly needs replacement too, and we handle that as one job. Get the full picture at Gate Installation.
Automatic Gate Installation
Signs you need it
You’re manually opening a gate that was designed to be automatic, or your existing operator is beyond repair and the gate itself is still sound.
What it costs in Pembroke Pines
Automatic gate installation in Pembroke Pines typically runs $1,100 to $3,900 depending on operator brand, gate weight, and access control add-ons.
How we do it
We mount the operator, run conduit and wiring, set travel limits, install safety loops and photo eyes, and program remotes and keypads, then test the full cycle before we call it done.
Driveway Gate Installation
Signs you need it
Your driveway gate is sagging, rusted through, or no longer matches the approved style for your subdivision after a repair or panel replacement.
What it costs in Pembroke Pines
Driveway gate installation in Pembroke Pines typically ranges $950 to $4,900 for the gate, posts, and labor, with slide or swing kits priced by length and material.
How we do it
We set concrete footers, hang and align the gate, weld or bolt the frame, and install the operator and safety edges so the gate cycles smoothly under daily use.
Sliding Gate Installation
Signs you need it
Your lot is too tight for a swing gate, or your existing slide gate binds on its track because the concrete pad has shifted over the years.
What it costs in Pembroke Pines
Sliding gate installation in Pembroke Pines typically falls between $1,400 and $5,500 depending on gate length, track type, and operator capacity.
How we do it
We lay a level track or cantilever system, hang the gate, install the drive chain and operator, and wire safety loops that stop the gate before it contacts a vehicle or person.
What Gate Installation Costs in Pembroke Pines
| Item | Typical range in Pembroke Pines |
|---|---|
| Single swing gate, basic aluminum | $950 – $2,300 |
| Sliding gate with operator | $1,400 – $4,900 |
| Full automatic driveway gate, access control included | $2,200 – $5,500 |
Do I need HOA approval before installing a gate in Pembroke Pines?
Almost always yes. Most Pembroke Pines subdivisions, including SilverLakes and Pembroke Falls, require architectural review before any gate work. We help you match approved styles and colors before ordering parts.
Can you install a gate operator on an existing manual gate?
Yes, in most cases. We check the gate’s weight, alignment, and hinge condition first, then recommend an operator sized for the gate. Many 15-to-25-year-old gates in Pembroke Pines are solid enough to automate.
Brands We Service in Pembroke Pines
We work on Ghost Controls, DoorKing, Elite, and Mighty Mule systems in Pembroke Pines, along with LiftMaster, FAAC, BFT, and others. We keep common control boards and remotes stocked locally so a first-trip parts replacement is possible on most calls. See the full list on our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pembroke Pines, FL
| Service | Typical range in Pembroke Pines |
|---|---|
| Gate repair, mechanical (wheel, hinge, chain) | $100 – $600 |
| Gate welding, steel or aluminum | $100 – $300 |
| Automatic gate installation | $1,100 – $3,900 |
| Driveway gate installation | $950 – $4,900 |
| Sliding gate installation | $1,400 – $5,500 |
| Electric gate repair, control board replacement | $350 – $1,500 |
| Electric gate repair, motor replacement | $450 – $2,200 |
| Gate access control installation | $600 – $2,500 |
| Gate safety sensor or loop detector repair | $150 – $550 |
Pembroke Pines pricing is pushed upward when HOA approvals demand custom colors or panel profiles, and when older concrete pads need re-pouring or leveling before a new gate can be set. Whatever the number, we quote it and you approve it before any work begins.
Neighborhoods We Serve in Pembroke Pines
We cover the full city, with regular calls from the gated and HOA-managed communities that make up most of Pembroke Pines. Our crews move quickly between jobs and we usually reach any address in the city within an hour or two depending on the day’s route.
- SilverLakes
- Chapel Trail
- Pembroke Falls
- Grand Palms
- Pembroke Isles
- Towngate
Service Area – Cities Near Pembroke Pines
Miami Gate Company serves Pembroke Pines and the surrounding South Broward area. The same crews also handle gate repair and installation in Cooper City, FL, Hollywood, FL, Pine Island Ridge, FL, and Andover, FL.
Serving Pembroke Pines, FL — Our Local Coverage Area
We’re based in the Pembroke Pines area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pembroke Pines
Yes. We work with architectural review requirements in communities like SilverLakes and Pembroke Falls. We keep approved paint codes and panel specs on file so replacement parts pass review before installation.
Most calls in the city are reached the same day or next morning. If a gate is stuck open and a child or pet is at risk, tell us when you call and we’ll prioritize the route.
Yes. We repair and install community entry gates, access control systems, and slide operators for HOAs and commercial properties across the city, including the larger master-planned developments.
If your gate is down, sagging, or stuck, call (833) 570-5807 for a free estimate. Gates are all we do, and we’ve served Pembroke Pines since 2012.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pembroke Pines Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Javier Mendoza"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Ramon Salazar"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Bryant