Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Broadview Park, FL
Gate installation in Broadview Park means building for wind, salt air, and a housing stock that dates mostly from the 1950s through the 1970s. We install driveway gates, yard gates, and automatic operators on properties throughout this unincorporated Broward County community, where nearly every job has to answer one question: will this gate still be square and operational after the next hurricane? Most Broadview Park homes sit on generous lots with chain-link or aluminum fencing, and the gates we install here lean toward steel and aluminum built to survive 100+ mph gusts and year-round humidity. From first-time installations to replacing a gate that took storm damage, we handle the full job from footing to final programming. Call us at (833) 570-5807 for a free site assessment.
Why Broadview Park Homes Are Different
Broadview Park is a small, unincorporated pocket of Broward County squeezed between Fort Lauderdale and the Everglades. The housing stock is dominated by mid-century single-family homes, many block or stucco ranch-style with carports, chain-link and aluminum yard fencing, and a mix of small commercial parcels along the US-441/State Road 7 corridor. That matters for gate work because the gates we service here are typically older aluminum, steel, or chain-link, often with manual or light-duty operators that have been through a decade or more of subtropical exposure.
The climate is the second thing that shapes every job. June through November brings hurricane season, and the rest of the year delivers intense UV and near-constant humidity and salt air. Steel gates rust faster here than they do a few miles inland. Operators degrade from moisture intrusion and corrosion on control boards and limit switches. Hinges bind, tracks collect debris, and post-storm realignment becomes a routine repair call in September and October. A gate that looks fine in March can be dragging and groaning by August.
There’s also a permitting detail that catches out-of-area installers off guard. Because Broadview Park is unincorporated Broward County rather than an incorporated city, gate permits and inspections fall under Broward County’s building code and High-Velocity Hurricane Zone (HVHZ) product-approval rules. Replacement gates and automatic openers need to carry Miami-Dade NOA or FL product approvals. We know which systems meet that standard and spec them from the start, so your installation doesn’t stall at the permit desk.
Styles & brands we work with
Our Main Broadview Park Services
Most Broadview Park property owners call us for one of two things: a gate that has stopped working or started acting erratically, or a gate that needs an upgrade to a modern automatic system. Here is how those two services work in this area.
Gate Repair in Broadview Park
Gate repair in Broadview Park usually starts with a gate that won’t slide, a hinge that has pulled loose from a weathered post, or a gate that sits out of square after a storm. The housing era here means many original gates are 40 to 60 years old, with wear patterns you don’t see on newer construction. We rebuild hinge points, replace rollers and tracks, straighten or rehang bent frames, and restore alignment on gates that have shifted in the sandy, settled soil common to this area. Whether it’s a manual chain-link gate or an aluminum driveway gate with a failing operator, Gate Repair in Broadview Park covers the mechanical side from post to frame.
Electric Gate Repair in Broadview Park
Electric gate problems in Broadview Park run from dead operators to gates that open halfway and reverse, remotes that won’t pair, and safety sensors that trip for no visible reason. Salt air and humidity attack control boards, wiring connections, and limit switches faster here than inland. We diagnose at the component level: motor, board, sensors, loops, and wiring, not just the obvious parts. Electric Gate Repair in Broadview Park is a core part of what we do, and we work on all major operator brands, including DoorKing, Elite, Ghost Controls, and Mighty Mule.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Broadview Park
Gate installation in Broadview Park typically means replacing a gate that has reached the end of its service life or adding an automatic gate to a property that has run manual for decades. The mid-century housing stock here means many original gates were built for a different era, often without automation, and the hurricane-season reality means the new gate has to be anchored and engineered for wind load. Whether it’s a yard gate for a ranch-style home or a commercial gate along the State Road 7 corridor, we build from the footing up with the right materials and HVHZ-compliant hardware. As a gate specialist, we handle this as a complete Gate Installation service from first measure to final programming and testing.
Automatic Gate Installation
Signs you need it
You are still getting out of the car to open a manual gate, or your existing operator is old enough that parts are no longer available and repairs are becoming a monthly event.
What it costs in Broadview Park
Automatic gate installation in Broadview Park typically runs from $4,500 to $12,500, with most residential systems landing between $5,000 and $8,000 depending on gate size, operator type, and power run distance.
How we do it
We measure the opening, set or reinforce the posts, mount the gate and operator, run power and safety loops or sensors, then program and test the full travel cycle until it’s operating reliably.
Driveway Gate Installation
Signs you need it
Your current driveway gate is rusted, warped, or sagging, or you have no gate at all and want to secure the driveway opening onto your Broadview Park lot.
What it costs in Broadview Park
A full driveway gate installation in Broadview Park typically starts around $3,500 for a basic single-swing or slide setup and runs up to $15,000 for double gates, custom steel or aluminum, and full automation.
How we do it
We set plumb posts in concrete, hang and align the gate to swing or slide true, install the operator and safety edges or sensors, and finish with programming and a full operational walkthrough.
What Gate Installation Costs in Broadview Park
| Item | Typical range in Broadview Park |
|---|---|
| Basic manual gate replacement | $1,500 – $4,000 |
| Automatic gate with operator | $4,500 – $12,500 |
| Full driveway gate system | $3,500 – $15,000 |
Do I need a permit to install a gate in Broadview Park?
Most automatic gate installations in Broadview Park require a permit through Broward County, and the gate and operator must meet High-Velocity Hurricane Zone product-approval standards. We spec compliant equipment from the start so the permit process doesn’t stall the job.
Can you install a gate that matches my existing Broadview Park fencing?
Yes. We match gate materials and styles to the existing chain-link, aluminum, or steel fencing around your property, so the new gate sits in line with the fence rather than looking like an afterthought. Call (833) 570-5807 for a free estimate.
Brands We Service in Broadview Park
We service Ghost Controls, DoorKing, Elite, and Mighty Mule operators in Broadview Park, along with most other major brands a property owner is likely to have. Common boards, remotes, and safety sensors for these systems are kept stocked and ready, which means we can often complete a repair in a single visit. See our brands for the full list of systems we work on.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Broadview Park, FL
| Service | Typical range in Broadview Park |
|---|---|
| Gate repair diagnostic visit | $75 – $150 |
| Hinge or roller replacement | $150 – $450 |
| Gate realignment or rehanging | $250 – $900 |
| Electric gate component repair | $250 – $1,500 |
| Control board replacement | $350 – $1,200 |
| Safety sensor or loop repair | $200 – $800 |
| Basic manual gate replacement | $1,500 – $4,000 |
| Automatic gate with operator | $4,500 – $12,500 |
| Full driveway gate system | $3,500 – $15,000 |
Two things push gate prices up in Broadview Park more than anywhere else. The first is wind-load engineering: gates and operators need HVHZ-compliant product approvals, and that means you can’t just hang the cheapest gate off a big-box shelf. The second is corrosion resistance: steel gates and hardware need to be galvanized, powder-coated, or aluminum to survive the salt air, and that costs more up front than raw steel. Whatever the job, we quote the full price before any work starts, and we do not start until you have approved that number in writing.
Neighborhoods We Serve in Broadview Park
We work throughout the 33317 ZIP code and the surrounding unincorporated Broward County streets around Broadview Park. The area is compact, so our technicians are typically able to reach most Broadview Park properties quickly from our Miami base.
- Broadview Park central residential blocks
- Areas along US-441 / State Road 7
- Neighboring unincorporated Broward County communities
- Streets near the Davie border
- Areas near the Fort Lauderdale line
Service Area – Cities Near Broadview Park
Our gate technicians cover Broadview Park and the surrounding Broward County communities. If you’re in a neighboring city and need gate repair, electric gate repair, or a new installation, we serve Fort Lauderdale, FL, Plantation, FL, Broward Estates, FL, and Lauderhill, FL as well.
Serving Broadview Park, FL — Our Local Coverage Area
We’re based in the Broadview Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Broadview Park
We schedule Broadview Park repair calls on a regular route from our Miami base, and most jobs in the 33317 area are reached within a day or two of the call, with emergency storm-damage calls handled as quickly as possible. Call (833) 570-5807 and we’ll give you a straight answer on timing.
Many Broadview Park neighborhoods have associations or deed restrictions that govern gate style, height, and color, so it’s worth checking your HOA or community bylaws before you commit to a design. We can provide the specs and drawings your association will ask for.
Yes. We work on residential driveway and yard gates throughout Broadview Park’s mid-century neighborhoods, plus commercial and light-industrial gate systems along the US-441/State Road 7 corridor. The same team handles both, with the same brand-agnostic repair approach.
If your Broadview Park gate needs repair, an upgrade, or a full replacement, call Miami Gate Company at (833) 570-5807 for a free estimate. We’ll come out, assess the gate and operator, and give you a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Broadview Park Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Chris Norris"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Alma Vargas"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Bethany Hayes