Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Broward Estates, FL
Gate installation in Broward Estates usually means working with the neighborhood’s 1950s-to-1970s concrete-block homes, where driveway widths, setback lines, and soil conditions decide what kind of gate actually works. We install automatic and manual gates sized to the property, anchored for South Florida’s sandy, high-water-table ground, and built to hold up through hurricane season. If you’re weighing a new gate or replacing one that’s sagged past saving, call Miami Gate Company at (833) 570-5807 for a free on-site measure and a written price before anything is ordered.
Why Broward Estates Homes Are Different
Broward Estates sits just west of Fort Lauderdale in a pocket where the water table runs close to the surface and the soil holds more sand than clay. That combination does two things to gates. First, posts set years ago in shallow concrete start to lean after heavy rain, because saturated ground lets the footing shift. Second, the humidity works on metal constantly, so older ornamental iron and chain-link gates rust faster here than they would a few miles inland.
The homes themselves add another layer. Most were built between the 1950s and 1970s with concrete block and raised terrazzo floors, and many still have their original driveway layouts. That means narrow side yards, mature tree roots pushing against fence lines, and gate openings that were never designed for modern automatic operators. A new install in Broward Estates is rarely a drop-in job. We’re usually re-measuring the opening, pulling old posts, setting new ones deeper in concrete, and running fresh wiring. Older chain-link gates here corrode at the hinge welds first, while ornamental iron gates fail at the bottom rail where standing water sits after storms. Both problems show up on nearly every street off Northwest 27th Avenue, and the fix is the same: remove the rust, reinforce the joint, and protect the metal for the next decade.
Styles & brands we work with
Our Main Broward Estates Services
Most calls we get from Broward Estates fall into two buckets: a gate that won’t open or close right, and an electric operator that’s stopped responding. Both have their own dedicated pages below.
Gate Repair in Broward Estates
A sagging driveway gate in Broward Estates is usually a soil problem before it’s a hinge problem. When rain washes out around the post, the whole gate drops and drags against the concrete. We re-level the gate, reset the post in concrete, and repair or replace whatever the misalignment damaged. That covers broken hinge welds, bent frames, rotted wood sections, and corroded rails on older chain-link and ornamental iron gates common across the neighborhood. For the full scope of repair work and local pricing, see Gate Repair in Broward Estates.
Electric Gate Repair in Broward Estates
Electric gates in Broward Estates fail in predictable ways: control boards that short after storms, sensors that drift out of alignment, and motors that burn out trying to push a gate that’s already binding against a leaning post. We diagnose the whole system rather than swapping parts one at a time. That means checking the motor, board, loops, safety edges, and remote programming in a single visit. For a deeper look at how we handle automation failures, see Electric Gate Repair in Broward Estates.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Broward Estates
Gate installation in Broward Estates starts with the ground, not the gate. The neighborhood’s sandy soil and high water table mean posts need to be set deeper and with more concrete than a standard spec, otherwise the gate leans within a season or two. Most homes here were built from the 1950s through the 1970s, so we’re usually working with existing concrete driveways, mature roots, and older chain-link or ornamental iron gates that have reached the end of their service life. A proper install here means pulling the old posts, setting new ones below the washout depth, building the gate to the opening, and then fitting the operator so it never has to strain against a misaligned frame. That’s what we do, from the first measure to the final remote test. For the full installation scope, see Gate Installation.
Automatic Gate Installation
Signs you need it
You want to control who enters your driveway without getting out of the car, or your existing manual gate is being left open because it’s inconvenient to close.
What it costs in Broward Estates
Automatic gate installation in Broward Estates typically runs $1,800 to $4,200 for a single residential driveway system, depending on gate size and operator type.
How we do it
We measure the opening, check post depth and soil condition, build or reinforce the gate frame, then install and program the operator with safety sensors and remotes.
Sliding Gate Installation
Signs you need it
Your driveway is too short for a swing gate to open inward without blocking the car, or the grade slopes in a way that makes a swinging leaf drag.
What it costs in Broward Estates
Sliding gate installation in Broward Estates typically runs $1,500 to $4,800, with the higher end covering longer steel gates and heavier-duty track or cantilever systems.
How we do it
We pour a level track or set a cantilever base, hang the gate so it rolls clean, then install the operator, safety edges, and loop detection if you want automatic entry.
What Gate Installation Costs in Broward Estates
| Item | Typical range in Broward Estates |
|---|---|
| Automatic gate installation (single driveway) | $1,800 – $4,200 |
| Sliding gate installation | $1,500 – $4,800 |
| General gate installation (manual, steel or aluminum) | $1,200 – $3,500 |
The spread depends on gate width, whether we’re pouring new footings, and what kind of operator the job calls for. Every price is quoted before work starts, so you’re never surprised by the invoice.
Do you need a permit for gate installation in Broward Estates?
In many cases yes, especially for an automatic gate or a gate on a corner lot. We handle the permit paperwork for you and make sure the install meets Broward County setback and safety requirements.
How long does gate installation take in Broward Estates?
Most residential installations take one to three days on site. The biggest variable is concrete cure time when we set new posts, and whether the old gate needs to be demolished and hauled first.
Brands We Service in Broward Estates
We work on gate systems from Ghost Controls, DoorKing, Elite, Mighty Mule, and the rest of the major brands on the market. Our technicians stock common boards, sensors, and remote kits locally, so most Broward Estates repairs don’t wait on a parts shipment. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Broward Estates, FL
| Service | Typical range in Broward Estates |
|---|---|
| Gate repair (hinges, posts, alignment) | $150 – $600 |
| Electric gate motor replacement | $600 – $1,800 |
| Control board replacement | $400 – $1,400 |
| Safety sensor repair or replacement | $250 – $700 |
| Remote and keypad programming | $100 – $350 |
| Automatic gate installation | $1,800 – $4,200 |
| Sliding gate installation | $1,500 – $4,800 |
| General gate installation | $1,200 – $3,500 |
In Broward Estates the two things that push a price up faster than anything are post-setting depth and rust repair. If we’re digging out a post that’s been leaning in saturated soil, that’s more labor and more concrete than a simple hinge swap. And if a frame has corroded through at the welds, we quote the steel repair honestly rather than patching it and letting it fail again next rainy season. Every job gets a written price before any work begins, so you know the number before we touch the gate.
Neighborhoods We Serve in Broward Estates
We cover all of Broward Estates and the immediate blocks around it. Our usual response window for a repair call in this area is same day or next morning, depending on when you call and what the gate is doing.
- Northwest 27th Avenue corridor
- Northwest 31st Avenue blocks
- Northwest 21st Avenue area
- Martin Luther King Jr. Boulevard corridor
- West of Northwest 23rd Terrace
Service Area – Cities Near Broward Estates
Miami Gate Company serves Broward Estates and the surrounding South Florida communities. If you’re in Lauderhill, FL, Lauderdale Lakes, FL, Fort Lauderdale, FL, or Plantation, FL, we can usually route a technician to you on the same schedule.
Serving Broward Estates, FL — Our Local Coverage Area
We’re based in the Broward Estates area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Broward Estates
Most repair calls in Broward Estates get a next-business-day visit, and many wind up same day when you call before noon. If the gate is stuck open or won’t secure, tell the dispatcher what’s happening so we can prioritize the route.
Some of the smaller HOA communities in Broward Estates have architectural review requirements for new gates, especially front-facing driveway gates visible from the street. We can give you the drawings and specs the board needs and adjust materials to match the neighborhood standard.
Yes. We service commercial slide gates, barrier arms, and automatic entry systems for the apartment complexes and business lots around Broward Estates. Commercial work is usually quoted on site because the gate size, operator type, and traffic volume change the scope substantially.
For any gate issue in Broward Estates, from a post that’s leaning after the last storm to a full automatic gate installation, call Miami Gate Company at (833) 570-5807 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Broward Estates Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Arjun Sharma"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Chris Norris"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Alma Vargas