Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Hollywood, FL
Gate installation in Hollywood means working with salt air, coastal wind, and a housing stock that ranges from 1950s canal-front homes to master-planned HOA communities west of I-95. We install automatic, sliding, and driveway gates built for this specific environment, not generic kits that corrode in two seasons. Miami Gate Company has served Hollywood since 2012, and gates are all we do. Call (833) 570-5807 for a free estimate.
Why Hollywood Homes Are Different
Hollywood sits directly on the Atlantic, and the canal-and-intracoastal grid that defines neighborhoods like Lakes Section and Hollywood Lakes changes how gate hardware behaves. Aluminum and steel gates in the 33019 and 33020 ZIP codes pit and seize far faster than anything inland Broward sees. Hinges that would last fifteen years in Cooper City need replacement in four or five here. Post-Hurricane-Andrew code expectations push the work toward stainless fasteners, sealed operators, and wind-rated hinges rather than the chain-link fixes common west of the interstate.
The housing stock compounds it. East of I-95, you find mid-century block and stucco homes with original manual swing gates, many of them 60 to 70 years old. The posts have shifted, the hinges have sagged, and the gate drags on the concrete. Out toward 33026 and 33027, the problem reverses: master-planned communities run long shared automatic entry gates where a single failed operator or buried loop strands an entire subdivision. One gate, hundreds of residents, no way in. We handle both ends of that spectrum.
Summer squalls and near-annual named-storm threats add another layer. Lightning knocks out gate controllers. Salt spray eats terminal connections. Buried low-voltage loops short out after heavy rain saturates the soil. Any gate contractor in Hollywood who ignores the corrosion factor is guessing.
Styles & brands we work with
Our Main Hollywood Services
Most Hollywood homeowners and property managers call us for one of two reasons: a gate that won’t open, or a gate that never worked right to begin with. These are the two services we handle most in this city.
Gate Repair in Hollywood
A sagging gate, a seized hinge, a post that’s pulled out of plumb – repair in Hollywood is rarely a simple bolt-tightening job. The salt air means hardware fails from corrosion, not just wear, and a gate that scrapes the driveway in 33020 is often a hinge assembly that’s been quietly dissolving for years. We diagnose the mechanical problem at its root and fix it with stainless hardware rated for coastal exposure. Gate Repair in Hollywood is a dedicated page with pricing and the full breakdown.
Electric Gate Repair in Hollywood
Electric gates fail here in predictable ways: storm surge floods the operator housing, lightning fries the control board, and humidity corrodes the low-voltage connections. We work on the motor, the board, the safety sensors, and the wiring – not just the obvious parts. A gate that opens halfway and reverses is usually a sensor alignment or loop-detector issue, and that’s exactly the kind of component-level diagnosis we do. Electric Gate Repair in Hollywood covers the full scope.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Hollywood
Installing a gate in Hollywood is not the same job as installing one twenty miles inland. The coastal environment demands stainless fasteners, sealed operators, and hardware rated for wind and salt exposure, and the permitting realities here are stricter than most of Broward County. Whether you’re putting in a new automatic driveway gate on a canal-front property in 33019 or upgrading a shared HOA entry gate out west, the work has to be engineered for this specific environment. Miami Gate Company handles the full installation process, from site assessment to the final gate operator programming, so you have one specialist from concept to operational gate. We also offer Gate Installation details for those who want the full process mapped out.
Automatic Gate Installation
Signs you need it
You want a gate that opens without leaving the car, but a handyman-installed opener that struggles against the wind and salt is worse than a manual gate.
What it costs in Hollywood
Automatic gate installation in Hollywood typically runs $1,800 to $3,200 for a single swing gate with a basic operator, with slide gates and double swing gates ranging from $2,500 to $7,000+.
How we do it
We assess the gate weight, the hinge load, the wind exposure, and the power source, then install an operator matched to the gate’s actual mass and install stainless hardware throughout.
Driveway Gate Installation
Signs you need it
Your driveway opens directly onto a busy Hollywood street and you want a barrier that actually holds up to coastal weather instead of rusting out in three years.
What it costs in Hollywood
Driveway gate installation in Hollywood typically ranges from $2,200 to $7,000+, with automated systems and salt-air-rated hardware pushing the number higher.
How we do it
We set the posts in concrete with stainless anchors, hang the gate with wind-rated hinges, and wire the operator with sealed connections that survive the humidity.
Sliding Gate Installation
Signs you need it
You have a short driveway or a commercial entrance where a swing gate would eat too much space or block traffic.
What it costs in Hollywood
Sliding gate installation in Hollywood runs $2,200 to $6,000 for a typical residential or light-commercial cantilever slider, not including the operator.
How we do it
We pour the concrete track or install a cantilever system, hang the gate with stainless roller assemblies, and set the operator with proper limit switches and safety edges.
What Gate Installation Costs in Hollywood
| Item | Typical range in Hollywood |
|---|---|
| Manual single swing gate | $1,500 – $3,500 |
| Automatic single swing gate with operator | $1,800 – $3,200 |
| Double swing gate system | $2,500 – $7,000+ |
| Sliding gate (cantilever or track) | $2,200 – $6,000 |
These are Hollywood-specific ranges. Salt-air-rated stainless hardware, wind-rated hinges, and sealed operators add cost, but they’re the difference between a gate that lasts and one that fails after two summers. The price is quoted and agreed before any work starts.
How much does installing an automatic gate in Hollywood cost?
A single swing gate with automation typically lands between $1,800 and $3,200, with double swing and sliding systems running higher. Hollywood’s coastal requirements push you toward stainless and sealed components, which is the right call. Call (833) 570-5807 for an exact quote.
Do you handle everything from the gate to the operator to the wiring?
Yes. We handle the full installation: posts, gate fabrication or supply, operator, control board, safety sensors, and the low-voltage wiring run. One team, one point of contact.
Brands We Service in Hollywood
We work across nine major gate and operator brands, including DoorKing, Elite, Ghost Controls, and Mighty Mule. If you own a system from any of these, we diagnose it at the component level and stock common replacement parts locally. Check our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Hollywood, FL
| Service | Typical range in Hollywood |
|---|---|
| Hinge replacement (single gate) | $150 – $400 |
| Hinge replacement (double gate) | $300 – $800 |
| Gate wheel or roller replacement | $150 – $350 |
| Post repair or reinforcement | $200 – $600 |
| Gate opener installation | $1,800 – $3,200 |
| Gate operator replacement | $800 – $1,500 |
| Control board replacement | $300 – $900 |
| Safety sensor replacement | $200 – $500 |
| Manual single swing gate installation | $1,500 – $3,500 |
| Sliding gate installation | $2,200 – $6,000 |
What pushes prices up in Hollywood: salt-air corrosion that requires stainless hardware replacement, storm-surge damage to operators and loops, and HOA requirements for specific gate styles or automation features. Whatever the job, we quote the price before any work starts, and the number you approve is the number you pay.
Neighborhoods We Serve in Hollywood
We work across the full Hollywood area, from the canal-front streets east of US-1 to the HOA communities along Sheridan Street and Pines Boulevard. Response time for most Hollywood jobs is within one business day for diagnosis.
- Hollywood Lakes
- Lakes Section
- Emerald Hills
- Hollywood Hills
- Driftwood
Service Area – Cities Near Hollywood
Miami Gate Company covers Hollywood and the surrounding Broward communities. If you’re in Andover, FL, Carver Ranches, FL, Miramar, FL, or West Park, FL, we handle gate repair and installation there too. Same coastal-grade workmanship, same brand-agnostic approach.
Serving Hollywood, FL — Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hollywood
We prioritize Hollywood calls and can usually have a technician on-site within one business day for diagnosis. For a gate that’s stuck open or won’t close, call (833) 570-5807 and we’ll work you into the schedule as quickly as possible.
Most new automatic gate installations in Hollywood require a building permit, especially for driveway gates visible from the street. We handle the permit coordination as part of the installation, and HOA approvals are typically required if you live in a governed community.
Yes. Shared entry gates in Hollywood’s HOA communities are a major part of our workload. We work directly with property managers on diagnostics, repair quotes, and scheduled maintenance so residents aren’t left stranded by a failed operator.
If your Hollywood gate is sagging, seized, or refusing to open, call (833) 570-5807 for a free estimate. Gates are all we do.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hollywood Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Chris Norris"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Alma Vargas"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Bethany Hayes