Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Miramar, FL
Gate installation in Miramar means matching the right gate and operator to a specific house: a 25-year-old Mediterranean-style stucco home in a west Miramar HOA has different needs than a 1960s single-family lot near the Broward line. We handle the full job from post-setting and hinge alignment to operator wiring and safety sensor placement, on both residential and commercial properties. Miami Gate Company has served Miramar since 2012, and gates are all we do. Call (833) 570-5807 when you’re ready to talk through your project.
Why Miramar Homes Are Different
Miramar’s gate work splits along a line that runs through the city’s development history. West of I-75, the master-planned communities built from the 1990s through the 2000s are dense with HOA-governed entry gates, driveway gates, and pool gates, most of them aluminum or wrought-iron and now 15 to 30 years old. Those gates were installed by builders who had no idea they’d still be in service three decades later, and the operators, hinges, and control boards are reaching the end of their designed life at roughly the same time. Many of those communities require architectural review before any gate changes color, style, or material, and community entry gates often need property management coordination just to schedule the work.
East of I-75, toward 33023 and the Broward-Miami-Dade line, the housing stock is older and smaller. Those gates are usually simpler: manual driveway gates, yard gates, and fence gates on single-family and multi-family lots. The climate is the other constant. Salt-laden air off the Atlantic, intense year-round UV, and near-annual tropical storm exposure corrode metal, rust hinges, warp rails, and stress the electronics inside every automatic operator. Summer thunderstorms dump standing water that finds its way into control boxes. A gate in Miramar survives a harder life than a gate in most of the country, and the repairs reflect that.
Styles & brands we work with
Our Main Miramar Services
Most Miramar calls start with one of two problems: a gate that will not open or close reliably, or a gate that needs to be installed or replaced entirely. Here’s how each breaks down in this city.
Gate Repair in Miramar
Manual and automatic gates fail in Miramar for predictable reasons: rusted hinges from salt air, warped frames from tropical heat, sagging posts from years of storm-driven rain, and worn rollers on sliding gates. An HOA driveway gate that scrapes the ground or a pool gate that will not latch is a safety issue as much as a nuisance, especially where Florida barrier-code requirements apply. We diagnose the mechanical problem first, then quote the fix before any work starts. Gate Repair in Miramar covers the mechanical side in depth.
Electric Gate Repair in Miramar
When an automatic gate stops responding to remotes, reverses on its own, or hums without moving, the fault is usually in the operator, the control board, the safety sensors, or the low-voltage wiring, not the gate itself. Miramar’s afternoon storms and standing water tax these components hard, and most generalist handymen stop at the obvious parts. We work at the component level: motors, boards, loops, sensors, and remotes, across LiftMaster, FAAC, BFT, DoorKing, Mighty Mule, and more. Electric Gate Repair in Miramar has the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Miramar
New gate installation in Miramar usually means one of two scenarios: a homeowner in a west Miramar community replacing a builder-grade aluminum driveway gate that has finally worn out, or a property owner starting from scratch with a new automatic gate on a yard, driveway, or commercial lot. Both jobs share the same Miramar complications: HOA architectural review in the master-planned communities, wind-rated hardware for hurricane exposure, and proper post anchoring in ground that sees standing water every summer. We handle the entire process from measurement and design to final programming of remotes and safety sensors, which means you’re not coordinating a fence company, an electrician, and an operator dealer separately. Learn more about the full scope at our Gate Installation service page.
Automatic Gate Installation
Signs you need it
You want a gate that opens by remote, keypad, or intercom instead of by hand, or you’re trading up from a manual gate to a fully automated system.
What it costs in Miramar
Expect $2,100 to $7,500 in Miramar depending on the operator, gate size, and whether electrical work is already in place.
How we do it
We set and anchor the posts, hang the gate, install the operator and control board, run the low-voltage wiring, mount the safety sensors, and program every remote and keypad on-site.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through, sagging past repair, or no longer meets HOA design standards and needs full replacement.
What it costs in Miramar
Most Miramar driveway gates run $2,100 to $7,500 installed, with premium aluminum and iron options pushing toward the upper end.
How we do it
We measure the driveway opening, build or order the gate to spec, set wind-rated posts, hang and align the leaf or leaves, then automate if you want it powered.
What Gate Installation Costs in Miramar
| Item | Typical range in Miramar |
|---|---|
| Single swing gate, manual | $1,000 – $3,700 |
| Automatic swing gate with operator | $2,100 – $7,500 |
| Sliding gate with full automation | $3,000 – $8,000 |
How long does gate installation take in Miramar?
Most residential installations finish in one to three days. HOA architectural approval can add a week or more to the front end in west Miramar communities, so plan for that before we schedule the install.
Do you handle HOA approval for Miramar gate projects?
We provide the specifications, material samples, and drawings your HOA’s architectural review committee will ask for. The approval itself comes from the HOA, but we make the submission package straightforward so the process moves as fast as the committee allows.
Brands We Service in Miramar
We work on Gate Installation systems from every major manufacturer, including Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common boards, sensors, and remotes stocked for faster turnaround on Miramar repairs. See our brands page for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Miramar, FL
| Service | Typical range in Miramar |
|---|---|
| Gate hinge replacement | $180 – $400 |
| Gate frame straightening | $300 – $700 |
| Automatic gate operator replacement | $900 – $2,500 |
| Control board replacement | $350 – $900 |
| Safety sensor replacement | $200 – $500 |
| Single swing gate, manual | $1,000 – $3,700 |
| Automatic swing gate with operator | $2,100 – $7,500 |
| Sliding gate with full automation | $3,000 – $8,000 |
| Gate opener installation | $800 – $2,200 |
| Full gate system replacement | $3,700 – $8,000 |
In Miramar, HOA-required finishes and wind-rated hardware can push material costs up, and community entry gate work often adds a property management coordination step. Whatever the job, we quote the full price before any work begins, and that number does not change unless the scope changes.
Neighborhoods We Serve in Miramar
We cover all of Miramar, from the gated communities west of I-75 to the older neighborhoods around 33023. Response times across the city typically run the same business day for diagnosis calls, with many repairs completed on the first visit.
- Silver Lakes
- Sunset Lakes
- Riviera Isles
- Miramar Isles
- Huntington
Service Area – Cities Near Miramar
Our service area extends beyond Miramar into the surrounding Broward County communities. We work regularly in Andover, FL, Carver Ranches, FL, West Park, FL, and Hollywood, FL, bringing the same gate-only focus to every job.
Serving Miramar, FL — Our Local Coverage Area
We’re based in the Miramar area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Miramar
We prioritize calls where a gate is stuck open, stuck closed, or leaving a property unsecured. Most Miramar diagnosis visits happen the same business day, and many repairs are completed on that first trip because our trucks carry the common boards, sensors, hinges, and remotes for major brands.
Permit requirements vary by scope and location. A straight replacement of the gate leaf or operator usually does not need one, but new post-setting, electrical runs, or work on a community entry gate may trigger City of Miramar or HOA requirements. We can tell you during the estimate what applies to your specific property.
Yes. We handle commercial entry gates, parking gates, and industrial slide gates across Miramar, including ones with DoorKing, Elite, or FAAC operators. Commercial jobs are quoted after a site walk so we can account for traffic patterns, safety loop placement, and any property management access rules.
If your gate needs repair or you’re planning a new installation in Miramar, call Miami Gate Company at (833) 570-5807 for a free estimate. We’ll tell you straight what it costs, what it takes, and how long it will hold up in South Florida conditions.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Miramar Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Alma Vargas"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Bethany Hayes"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Javier Mendoza