Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Sunset, FL
Gate installation in Sunset, FL usually means replacing or upgrading hardware on a 1970s-to-1990s ranch home, where the original sliding gate has spent decades in salt-heavy humidity. We install automatic and manual driveway gates, pedestrian gates, and pool safety gates across the 33173 ZIP code. Most Sunset properties already have a perimeter opening, so our work centers on fitting a new gate system to an existing track, column, or hinge layout rather than starting from bare ground. Call (833) 570-5807 and we’ll walk the property and give you a written price before any work begins.
Why Sunset Homes Are Different
Sunset sits southwest of downtown Miami, a suburban pocket where most single-family homes are block and stucco builds from the 1970s through the 1990s. Driveway gates here are typically sliding or swing models in wrought iron or aluminum, mounted on masonry columns that have settled and shifted over 30 to 50 years. The original tracks are often pitted, the wheels worn, and the operator wiring spliced more than once.
The climate does real work against gate hardware. Salt-laden humidity off the Atlantic, combined with daily summer rain, accelerates rust on steel hinges, brackets, and track bolts. After hurricane season, we see a wave of Sunset calls for gates that jumped their track, bent rollers, or lost operator programming when power flickered. Pool safety gates are another Sunset constant: many homes have pools, and homeowners often need latches re-verified to meet code requirements for insurance after a storm or a home inspection.
Sunset is also heavily Cuban-American, and plenty of our customers prefer to talk through the repair in Spanish. Our techs can do that. It matters when you’re explaining why a board failed or what a new operator will cost.
Styles & brands we work with
Our Main Sunset Services
Two services cover most of the calls we run in Sunset, and each has its own dedicated page with deeper detail.
Gate Repair in Sunset
Wrought-iron driveway gates on 40-year-old tracks eventually bind, sag, or refuse to latch. We rebuild hinges, re-hang leaves, replace rollers and wheels, and repair welded frames that have cracked at the corners. Salt corrosion is the usual culprit in Sunset, and we treat the metal before it fails again. If the gate still moves but scrapes or shudders, that’s a track or roller issue. If it won’t move at all, the problem usually lives in the operator or a seized wheel. See Gate Repair in Sunset for the full breakdown of what we fix and what it costs.
Electric Gate Repair in Sunset
An automatic gate that stops responding after a storm, runs only from one remote, or reverses for no reason is an electrical problem, not a metal problem. We trace it at the component level: control board, motor capacitor, safety sensors, loop detector, and receiver. Humidity and power surges shorten board life in Sunset, and we see more Ghost Controls and Mighty Mule operators fail after lightning-adjacent outages than from mechanical wear. Electric Gate Repair in Sunset covers diagnosis and repair in depth.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Sunset
Most Sunset gate installation jobs are replacements, not first-time builds. The house already has a paved driveway, two masonry columns, and an old gate that’s past saving. We measure the opening, check the column condition, and match the new gate to the existing layout, whether it’s a sliding aluminum panel or a swing gate in ornamental iron. Salt air means we specify powder-coated aluminum or properly sealed steel, and every new operator gets a surge protector on the board. For a complete look at the service, see Gate Installation. The price is quoted and agreed before any work starts.
Automatic Gate Installation
Signs you need it
The old gate works manually but the opener is dead, or you’re tired of getting out of the car in the rain.
What it costs in Sunset
Automatic gate installation in Sunset typically runs $4,500 to $9,500 installed, depending on operator brand and gate length.
How we do it
We mount the operator, run the power and low-voltage wiring in conduit, install safety sensors and a keypad or receiver, then program travel limits and test under load.
Sliding Gate Installation
Signs you need it
Your current slide gate binds on the track, the wheels are shot, or the opening needs a longer panel with a smoother operator.
What it costs in Sunset
Sliding gate installation in Sunset typically runs $3,800 to $8,500 depending on track length, steel or aluminum, and automation.
How we do it
We set level steel track on a clean base, hang the gate on roller trucks, weld or bolt the frame, and add a catch post and operator bracket.
What Gate Installation Costs in Sunset
| Item | Typical range in Sunset |
|---|---|
| Sliding gate only, no automation | $1,800 – $4,800 |
| Automatic gate package, operator included | $4,500 – $9,500 |
| Swing gate replacement, double leaf | $3,200 – $7,500 |
Two things push the price up in Sunset: column condition and permitting. If the masonry columns need reinforcement or rebuild work before a gate can hang, that’s added cost. And Miami-Dade permitting for a new automated gate, with safety devices, adds both time and line items to the job.
Will the new gate survive hurricane season in Sunset?
We build for wind load and salt. That means heavier posts, sealed bearings, and operators rated for frequent cycling. No gate is storm-proof, but a properly installed one won’t become debris.
Can you match a new gate to my existing fence?
Yes. We match the picket style, finish, and height to your existing perimeter fence so the new gate doesn’t look bolted on. It’s easier when we can see the fence and take measurements in person.
Brands We Service in Sunset
We’re trained across the major gate and operator platforms, and in Sunset we commonly work on Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Parts for most of these are stocked on the truck or available locally same-week. If you have an operator we haven’t named, bring us the model number. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Sunset, FL
| Service | Typical range in Sunset |
|---|---|
| Gate roller and hinge repair | $145 – $385 |
| Slide gate derailment (post-storm reset) | $165 – $345 |
| Gate frame re-weld or steel reinforcement | $210 – $465 |
| Gate opener replacement, operator only | $750 – $2,000 |
| Control board replacement | $280 – $610 |
| Safety sensor or loop detector replacement | $235 – $495 |
| Remote, keypad, or receiver replacement | $140 – $350 |
| Sliding gate installation, no automation | $1,800 – $4,800 |
| Automatic gate package, installed | $4,500 – $9,500 |
| Swing gate replacement, double leaf | $3,200 – $7,500 |
What pushes a Sunset gate higher than these ranges is almost always salt damage, not the labor itself. Rusted-out posts and track anchors take longer to prep correctly. And the price we quote is the price you approve before we start. No line items appear after the fact.
Neighborhoods We Serve in Sunset
Sunset’s 33173 ZIP covers a spread of single-family streets south of Bird Road and west of the Palmetto, where almost every block has a few driveway gates we’ve either repaired or replaced. We run calls across the area most days, and a diagnostic visit can usually happen within one to two business days depending on the route.
- Sunset proper, around SW 72nd Street
- Kendall Drive corridor, between SW 97th and 107th Avenues
- West Sunset, near the 874 toll road
- Snapper Creek area, north of Killian
- Continental Park, east of the Turnpike
Service Area – Cities Near Sunset
We run calls from Sunset into the neighboring southwest Miami-Dade communities when the job needs a gate specialist. Olympia Heights, FL is right next door with similar ranch-era housing. Westwood Lake, FL and Richmond Heights, FL sit east and southeast, and Kendale Lakes, FL is just southwest along Kendall Drive. If you’re near the line, call and we’ll tell you if we can route a tech your way this week.
Serving Sunset, FL — Our Local Coverage Area
We’re based in the Sunset area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sunset
Most diagnostic visits in the 33173 ZIP are scheduled within one to two business days. If the gate is stuck open and the property is unsecured, tell us when you call and we’ll prioritize the route. Call (833) 570-5807 and describe what happened.
Often yes. Sunset has a patchwork of HOA communities, and some require architectural review for a gate style or finish change. Miami-Dade County also reviews new automated gates for safety devices. We flag both early in the quote so the timeline is honest.
Yes. We run calls through the afternoon and early evening when needed, and we’ll give you a window rather than an open-ended day. Property managers and HOA boards can schedule multiple gates on one visit if they’re in the same Sunset community.
If you need a gate company in Sunset that works on the metal, the motor, and the board, call (833) 570-5807 for a free estimate. Miami Gate Company has served Sunset since 2012.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sunset Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Alma Vargas"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Bethany Hayes"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Javier Mendoza