Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in The Crossings, FL
Gate installation in The Crossings usually starts with the driveway itself. Most homes here were built in the 1980s and 1990s with short, stucco-walled driveways and original decorative metal gates that have spent decades in South Florida sun and salt air. When a gate finally fails beyond repair, or when a homeowner wants to automate a manual gate for the first time, the replacement has to match the community’s Mediterranean-revival look and hold up to hurricane-season wind loads. Miami Gate Company handles that full process, from measuring clearances in tight driveways to wiring a new operator to local code. Call (833) 570-5807 for a free estimate.
Why The Crossings Homes Are Different
The Crossings is a master-planned, deed-restricted community in West Kendall, and that changes how gate work gets done. Nearly every home sits behind a private driveway gate or inside a gated enclave, so a gate is not just a convenience here. It is part of a uniform streetscape that the HOA actively governs. Architectural standards cover gate color, style, and even the acceptable noise level of an operator. A replacement gate that would pass unnoticed in an unincorporated part of Miami-Dade can draw a notice in The Crossings if the style drifts from what the community expects.
Technicians also deal with something visitors rarely see: strict vendor registration and access-control rules at each gated entrance. We arrive knowing which entrance to use, where to check in, and how to get a work vehicle through without slowing down residents. The houses themselves are mostly 1980s and 1990s stucco construction with barrel-tile roofs and short driveways. That means many repairs happen in tight quarters where a large truck or crane simply cannot fit. The original operators on many of these homes are now 15 to 20 years old, and after years of afternoon thunderstorms, the control boards are often the first thing to fail. We see that pattern block after block in this community’s uniform housing clusters.
Climate is the other constant. Intense sun bakes gate hinges and powder coating. Salt-laden air works on every exposed metal surface. Hurricane season from June through November brings wind-load requirements that make post-storm inspections a recurring need. Heavy summer downpours test the drainage around gate footings, and when water pools, gates sink and misalign. A gate specialist in The Crossings has to account for all of that before touching a single bolt.
Styles & brands we work with
Our Main The Crossings Services
The two calls we get most often from The Crossings homeowners are for mechanical gate failures and electric gate problems. Here is what each involves and where to find the full breakdown.
Gate Repair in The Crossings
The mechanical side of a gate takes a beating in this community. Hinges seize from rust, wheels flatten or break on sliding gate tracks, and decorative metal gates sag until they drag on the driveway. In The Crossings, we often repair gates that are original to the home, meaning 25 to 35 years old and held together by hardware that was never meant to last this long. Tight side yards and short driveways complicate the work, but the fix itself is usually straightforward once we identify the failed component. Full details are on the Gate Repair in The Crossings page.
Electric Gate Repair in The Crossings
When an automatic gate will not open, closes halfway, or reverses for no reason, the cause is usually electrical. In The Crossings, the most common failure point by far is the control board, and the trigger is often a power surge from one of our frequent afternoon thunderstorms. We diagnose the motor, board, sensors, loops, and wiring as one system rather than swapping parts blindly. Being brand-agnostic matters here, because the right fix depends on the system, not on what one manufacturer happens to sell. See the Electric Gate Repair in The Crossings page for a component-by-component breakdown.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in The Crossings
Gate installation in The Crossings means working with older stucco homes, HOA architectural standards, and South Florida wind and corrosion conditions. Most new installations in this community are either replacements for failed original gates or first-time automation projects on manual gates that have been there since the house was built. We handle the full job: measuring the opening, checking that the driveway and footing can support the chosen gate type, installing the gate and operator, running power, and setting up sensors and remotes. Whether you need a simple driveway gate or a sliding gate for a wider opening, the process starts with a free on-site assessment. For homeowners comparing options, our Gate Installation page covers the full range of what we build and automate.
Automatic Gate Installation
Signs you need it
You currently open your driveway gate by hand and want push-button or keypad access, or your existing automatic operator has failed and the gate itself is too worn to justify another motor.
What it costs in The Crossings
Gate operators in The Crossings generally range from $600 to $3,500 depending on the duty cycle and brand, and full gate and motor packages often run $3,500 to $9,500 installed.
How we do it
We measure the gate and driveway, select a motor matched to the gate’s weight and use frequency, pull the electrical run, mount the operator, install safety sensors and a keypad or intercom, and program all remotes on site.
Electric Gate Installation
Signs you need it
You want an automatic gate with electric operation, access control, and safety features from the start rather than retrofitting a manual gate years later.
What it costs in The Crossings
Electric gate and motor packages in this area typically fall between $3,500 and $9,500 installed, and adding keypads or intercom systems may run another $400 to $2,500.
How we do it
We handle the conduit, the low-voltage wiring, the operator mounting, the safety edges or photo eyes, and the control programming so the gate opens and closes safely every time.
Driveway Gate Installation
Signs you need it
You are installing a gate at the driveway entrance for the first time, or the existing driveway gate is rusted, sagging, or no longer matches the home after a renovation.
What it costs in The Crossings
Swing gate installations in this community generally run $2,500 to $10,000 including the gate, and sliding driveway gates in the same market tend to be $3,000 to $12,000 installed.
How we do it
We verify driveway clearance, set the posts or track, hang and balance the gate, then align the lock and catch so the gate opens smoothly without scraping the pavers.
Sliding Gate Installation
Signs you need it
Your driveway is short or sloped, or you have a wide opening where a swing gate would need too much clearance to open without hitting a wall or car.
What it costs in The Crossings
Sliding gate installations in The Crossings typically cost $3,000 to $12,000 installed, with cost driven by gate width, material choice, and track condition.
How we do it
We check the concrete pad and drainage first because pooled water is the main reason sliding gate tracks sink in this area, then set the track, hang the gate, and install the operator if the gate is automated.
What Gate Installation Costs in The Crossings
| Item | Typical range in The Crossings |
|---|---|
| Gate operator only | $600 – $3,500 |
| Full gate and motor package | $3,500 – $9,500 |
| Swing or sliding gate installed without motor | $2,500 – $12,000 |
Does an HOA have to approve my gate in The Crossings?
Yes, in most cases. The Crossings is deed-restricted, and gate style, color, and even operator noise are typically governed by architectural standards. We can help you prepare the submittal, but approval comes from your HOA first.
Can you install a gate on a short The Crossings driveway?
Usually yes. We use sliding gates or compact swing configurations designed for limited clearance. The key is measuring the actual travel path before ordering the gate so it never hits a garage door or parked car.
Brands We Service in The Crossings
We work on virtually any gate system you own, including DoorKing, Elite, Ghost Controls, and Mighty Mule. Because gates are all we do, our technicians are trained across competing platforms, and we keep common boards, sensors, and remotes stocked for faster turnaround. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in The Crossings, FL
| Service | Typical range in The Crossings |
|---|---|
| Gate operator only | $600 – $3,500 |
| Control board replacement | $275 – $650 |
| Hinge, wheel, or track repair | $150 – $400 |
| Sensor or photo eye repair | $150 – $350 |
| Remote, keypad, or intercom repair | $100 – $300 |
| Full gate and motor package | $3,500 – $9,500 |
| Swing gate installed without motor | $2,500 – $10,000 |
| Sliding gate installed without motor | $3,000 – $12,000 |
Prices in The Crossings tend to rise when a job requires matching an HOA-approved finish, working on a heavily corroded original gate, or dealing with a failed concrete pad under the track. You get a written price before we start, and that price is agreed before any work begins.
Neighborhoods We Serve in The Crossings
We work throughout the 33186 ZIP code and know the community’s gated enclaves and villa sections well. Response times run shortest during weekday mornings, and we schedule around each entrance’s access rules when we confirm the appointment. Representative communities we serve include:
- The Crossings subdivision itself, including its gated residential enclaves
- Adjacent villa and townhome clusters inside The Crossings
- Single-family streets off SW 112th Avenue
- Homes near the community’s main entrances and amenity areas
- Deed-restricted pockets throughout 33186
Service Area – Cities Near The Crossings
Our gate repair and installation coverage extends into the surrounding West Kendall and South Miami-Dade communities. If you are in Three Lakes, FL, Country Walk, FL, The Hammocks, FL, or Kendale Lakes, FL, the same team covers your area. Each of those communities has its own gate styles and HOA rules, and we adjust our approach accordingly.
Serving The Crossings, FL — Our Local Coverage Area
We’re based in the The Crossings area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in The Crossings
We schedule calls throughout the week in the 33186 area. Because our technicians are already working in West Kendall most weeks, the typical wait for a repair visit is shorter than in neighborhoods farther from our normal route. Exact timing depends on the day and season.
Many automatic gate installations require an electrical permit at minimum, and The Crossings adds HOA approval on top of that. We handle the technical details for the permit application, but the HOA submittal is your responsibility, and we can help you gather the specs.
Yes. Most of our work in The Crossings is residential because of the housing stock, but we also service commercial gates in the community’s retail and property-management areas. The repair approach is the same: diagnose the actual failed component and fix what is there.
If your gate is sagging, stuck, or refusing to open, call Miami Gate Company at (833) 570-5807. We will schedule a visit, diagnose the problem on site, and give you a written price before any work begins. Gates are all we do in The Crossings, and that focus shows in the diagnosis.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What The Crossings Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Bryant"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Ryan Miller"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Arjun Sharma