Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Sunset, FL | Miami Gate Company
We’re an independent gate repair company that offers our Ghost Controls services across Sunset, FL. If your Ghost Controls system has stopped responding, is grinding, or lost programming after a storm, we diagnose and repair it without pushing you toward a replacement you don’t need. What makes our work different in Sunset is that we know exactly how salt humidity, hurricane wind loads, and 1970s-90s ranch property layouts accelerate Ghost Controls failures here. Call (833) 570-5807 for a free estimate. We work on every Ghost Controls kit sold for residential use, from the TSS1 single-swing to the TSL1 slide opener.
Why Sunset Residents Choose Us for Ghost Controls Service
Gates are all we do. That focus means our technicians spend their days tracing Ghost Controls control-board faults, testing battery-backup harnesses, and realigning actuator arms, not splitting attention across fencing, garage doors, or other trades. We carry Ghost Controls-specific test gear and OEM replacement modules, so we usually identify the actual failed component during the first visit. Ruben Castellano, the owner of Miami Gate Company, got his start in industrial mechanics at Miami Dade College’s Wolfson Campus before spending nearly two decades working on gate operators across Miami-Dade. His approach to troubleshooting is methodical: trace the fault, confirm the failure, then replace only what failed. If you don’t know exactly what failed, you’re just guessing with someone else’s money.
We’re not a Ghost Controls dealer. We’re not manufacturer-affiliated. What that means for Sunset homeowners is simple: we fix what you have. If a control board is the problem, we replace the board. We don’t upsell a full system swap when a $180 module gets your gate working again.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Sunset
- Corroded control-board terminals and battery-backup harnesses. Ghost Controls boards mount low on the gate post, and Sunset’s salt-laden humidity plus year-round rain means splash and condensation attack those terminals constantly. We see green corrosion on boards installed less than three years ago, especially on pool-deck gate operators that catch sprinkler overspray.
- Actuator arm bent or manual-release lock stripped after a named storm. Hurricane-season wind loads push hard against swing gates. Ghost Controls arms are solid, but sustained gusts can bend the arm or strip the manual-release mechanism, leaving the gate stuck part-open. This is a recurring post-storm call in Sunset.
- Solar-panel and low-voltage wiring damage. UV-cracked insulation and rodent-chewed low-voltage runs on fence lines cause intermittent “no response” from Ghost Controls remotes and keypads. Sunset’s older ranch lots have long fence runs, which means more exposed wiring.
- Limit-switch drift after the gate jumps track. Saturated soil from heavy rain shifts gate posts in Sunset. When the post moves even slightly, the Ghost Controls arm over-travels, the limit switch drifts, and the gear strips or the fuse blows. We reset limits and repair the drive train, then address the post if needed.
- Battery-backup failure on pool safety gates. Ghost Controls battery-backup systems fail silently. Homeowners often don’t know the battery is dead until the power blips and the pool-deck gate won’t open. In Sunset, where pool safety gates must re-latch to stay insurance-code-compliant, we treat this as a priority repair.
Ghost Controls Service in Sunset: What Local Conditions Mean for Your Equipment
Sunset is unusual in this way: nearly every single-family home sits behind a perimeter gate, and a large share of those same lots also have a pool-deck gate with its own Ghost Controls operator. That means a single failure pattern, like a corroded board or a damaged battery harness, often strands two access points at once. After a heavy summer downpour or a named storm, we get a wave of calls for driveway gates that jumped their track and lost programming, plus pool gates that homeowners suddenly need re-latched for insurance compliance. The housing stock here, mostly 1970s-1990s ranch and Mediterranean-style block homes on generous lots, means original slide-gate hardware, rusty hinges, and aging openers are the norm. Ghost Controls equipment on these properties faces more salt exposure, more UV stress, and more wind load than identical equipment inland. In the Westchester section of Sunset, we recently repaired a homeowner’s Ghost Controls TSS1 single-swing kit that stopped responding after a summer downpour. The control board’s terminal strip was green with corrosion and the battery-backup harness had shorted. We replaced the OEM board and harness, re-set the limit switches, and had the driveway gate cycling normally that same afternoon. Then we verified the pool-deck gate’s manual release still latched to code. Two gates, one visit, both back in service.
Ghost Controls Models & Products We Service in Sunset
We service the full residential Ghost Controls lineup, including the TSS1 single-swing kit, the TDS2 dual-swing opener, the TSS1XP heavy-duty single-swing with battery backup, and the TSL1 slide gate operator. Our parts policy is straightforward: OEM Ghost Controls control boards, actuator arms, and battery harnesses for anything that carries programming or safety logic, and quality aftermarket hardware like hinges, rollers, and keypads where durability matches or beats OEM. We keep common Ghost Controls modules stocked for fast Sunset turnaround. If your operator is more than a decade old and the board, arm, and battery all need replacement, we’ll tell you honestly when a new kit is the better spend. No upselling, just the truth from a technician who’s seen it.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Sunset
Ghost Controls gate repair in Sunset depends on what failed. A limit-switch adjustment runs less than a control-board replacement. A corroded battery harness is cheaper to fix than a bent actuator arm. What we can tell you upfront: we quote the price and get your agreement before any work starts. No surprises on the invoice. Diagnostic visits are free when you proceed with the repair. The estimate includes the failed component, the labor, and the reassembly and testing time. Call (833) 570-5807 and describe what your Ghost Controls opener is doing, or not doing. We’ll give you an honest range over the phone and schedule a visit.
Serving Sunset, FL — Our Local Coverage Area
We’re based in the Sunset area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Sunset
Water intrusion at the control board is the usual culprit. Ghost Controls boards sit low on the post, and Sunset’s rain plus salt humidity accelerates terminal corrosion and shorts the battery-backup harness. We replace the corroded board or harness, then seal and reposition components to reduce future exposure. Call (833) 570-5807 if your opener died after a downpour, we’ll diagnose it on site.
Yes. Storm-related power surges and voltage drops corrupt Ghost Controls programming regularly in Sunset. We re-flash the board to factory settings, reprogram remotes and keypads, and re-set limit switches if wind shifted the gate or post. If the surge damaged the board itself, we replace it with an OEM unit. Call (833) 570-5807 and tell us what the gate is doing now, we’ll get you scheduled.
We reset the gate on its track, inspect the drive chain and rollers for damage, then re-set the limit switches so the motor stops at the correct travel points. If the post shifted from saturated soil, we address that too. Grinding usually means the gear is still engaging but the gate can’t move freely, so we don’t run it long before diagnosing. Call (833) 570-5807 for a free estimate on slide-gate track repair in Sunset.
Yes, and we treat this as a priority here. Pool safety gates in Sunset must re-latch after a storm or power event to stay insurance-code-compliant. We test the battery, replace it if it’s failed, and verify the manual release still latches correctly. If the battery-backup harness is corroded, we replace that too. Call (833) 570-5807 if your pool gate won’t respond on battery power.
If the operator is more than a decade old and the control board, actuator arm, and battery all need replacement, a new kit usually makes more financial sense than three separate repairs. We’ll show you exactly what failed, what each fix costs, and what a new Ghost Controls kit would cost installed. Then you decide. Call (833) 570-5807 and we’ll give you the straight answer based on what we find.
Service Areas Near Sunset
We service Sunset service area in full, plus nearby Hialeah, North Miami, Miami, Allapattah, Miami Beach, and Brownsville. If your Ghost Controls opener is down in a neighboring community, the same team covers it. We also provide Ghost Controls service in University Park and Ghost Controls service in North Miami Beach for property owners in those areas.
Book Your Ghost Controls Service in Sunset Today
If your Ghost Controls gate is down, erratic, or making noise it shouldn’t, call (833) 570-5807. We’ll put a technician who knows Ghost Controls systems inside and out on it. Free estimates, honest diagnosis, and the repair done right the first visit. That’s how we work in Sunset.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Sunset, FL and surrounding Miami-Dade communities.