Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in North Miami, FL
Gate installation in North Miami means building for salt air, hurricane wind loads, and 1940s-to-1960s concrete-block homes that were never designed for modern automation. We install vehicle gates, automatic operators, and pool safety barriers that meet Miami-Dade code while standing up to subtropical humidity and the corrosion that comes off Biscayne Bay. If the gate on your 33161 property is sagging, failing, or simply not built for the storm season ahead, call Miami Gate Company at (833) 570-5807 for a free estimate on a gate built right the first time.
Why North Miami Homes Are Different
Much of North Miami’s 33161 housing stock dates to the 1940s through 1960s, and that era shapes nearly every gate job we do. The homes are concrete-block and stucco, often with original driveway gates hung on cinder-block walls or chain-link frames that have been reworked two or three times over the decades. Steel hinge posts set directly into old block without proper reinforcement are the single most common failure point we see, especially where soil settlement has pulled the post out of plumb and left the gate dragging or binding.
The climate compounds it. Salt-laden Atlantic air and moisture from Biscayne Bay accelerate rust at the bottom hinge, the operator arm mount, and any exposed weld. During hurricane season, wind-load standards mean a gate that is merely heavy is not enough: anchoring, bracing, and barrier height all have to be engineered for Miami-Dade compliance. Pool safety barriers add another layer, since many North Miami backyards still rely on older gate hardware that no longer meets current self-closing and self-latching code. That combination of aging construction, aggressive corrosion, and strict code is exactly what North Miami gate work is about.
Styles & brands we work with
Our Main North Miami Services
North Miami property owners call us most often for two reasons: a gate that has stopped opening or closing properly, and an electric gate system that has become erratic or unresponsive. Here is what each involves in the 33161 area.
Gate Repair in North Miami
Most mechanical gate failures in North Miami trace back to hinge fatigue, post settlement, or corrosion that has been building for years. The older cinder-block walls and chain-link gate frames common across 33161 put a lot of stress on hardware that was never rated for the weight it carries. We repair sagging gates, replace worn hinges and posts, correct misaligned frames, and restore latches and drop rods so the gate actually closes and stays closed. On properties that have survived multiple storm seasons, we often find the bottom hinge has become the weak point. Learn more about Gate Repair in North Miami.
Electric Gate Repair in North Miami
Electric gate systems fail differently than mechanical gates, and most of the time the motor itself is fine. The real problem hides in the control board, safety sensors, loop detectors, wiring, or remote receiver. North Miami’s humidity can corrode terminal connections inside the operator housing even when everything looks clean from the outside. We diagnose the full system at the component level, not just the obvious part. If your gate opens halfway, reverses for no reason, won’t respond to remotes, or trips its breaker, see Electric Gate Repair in North Miami for a full breakdown of what we diagnose and fix.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in North Miami
A gate installation in North Miami has to account for three things most other markets never deal with: salt-driven corrosion on every metal component, wind-load anchoring that meets Miami-Dade code, and an older housing stock where original openings were rarely square or level after 60-plus years of settlement. We build and hang gates that handle all three, whether the job is a simple manual driveway gate or a fully automated vehicle entry system. Our team also handles pool safety barrier installation with proper self-closing hinges and code-compliant latch heights, and every project follows the same process: measure, spec, fabricate or order, anchor, hang, automate if needed, and test. For a closer look at what full installation involves, see our Gate Installation guide.
Automatic Gate Installation
Signs you need it
A gate that has to be opened by hand every time, or a property where access control should exist but doesn’t, is the clearest sign.
What it costs in North Miami
Automatic gate installation in North Miami typically starts around $4,500 for a basic single swing operator on a prepared opening, with most complete jobs landing between $6,500 and $12,000 depending on gate size, material, and automation hardware.
How we do it
We set or reinforce the gate posts and hinges, mount the operator arm and motor, run the power and control wiring per Miami-Dade requirements, install safety edges and photo eyes, program remotes and keypads, and test full open-and-close cycles with proper force settings and obstacle detection.
Driveway Gate Installation
Signs you need it
A driveway with no barrier, a damaged gate beyond economical repair, or a property line where security and street access need formal control are all reasons homeowners call us.
What it costs in North Miami
Driveway gate installation in North Miami typically runs between $3,000 and $9,000 for a manual or basic automated single gate, with larger or heavier automatic systems ranging from $6,500 to $15,000 or more when custom fabrication, intercoms, or heavy-duty operators are included.
How we do it
We assess the driveway width, slope, setbacks, and existing wall or post conditions, then spec the right gate material and swing or slide configuration, set and anchor the posts with proper footings, hang and align the gate, and install any requested automation, vehicle detection, or safety devices before testing it under load.
Sliding Gate Installation
Signs you need it
Properties with short setbacks, steep driveway slopes, or wide openings where a swing gate would overtravel into the street or the car are ideal for sliding systems.
What it costs in North Miami
Sliding gate installation in North Miami generally starts around $5,000 for a basic cantilever or V-track system, with complete automated sliding gates commonly landing between $7,000 and $14,000 depending on gate width, weight, and operator grade.
How we do it
We pour or inspect the receiver base, set the track or cantilever rollers, build and hang the gate so it travels cleanly without binding, install the motor and rack, wire the control board and safety loops, and test the full travel with proper slow-down and stop positions.
What Gate Installation Costs in North Miami
| Item | Typical range in North Miami |
|---|---|
| Basic manual driveway gate | $2,000 – $4,500 |
| Automatic gate with operator | $4,500 – $12,000 |
| Heavy-duty or custom sliding gate | $7,000 – $15,000+ |
Do you handle the power run and safety edges?
Yes. We run the power from the existing electrical service to the operator, install low-voltage control wiring, mount safety edges and photo eyes, and wire vehicle detection loops so the system meets Miami-Dade code before we hand it over to you.
Can you install a gate that matches my existing wall or fence?
In most cases, yes. We match gate material and finish to your existing stucco wall, concrete block, or metal fence, and we fabricate to the opening dimensions we measure on site. Call (833) 570-5807 for a free measure and written quote.
Brands We Service in North Miami
We work on virtually any gate system, and in North Miami we carry or can quickly source parts for Ghost Controls, DoorKing, Elite, and Mighty Mule operators, along with other major brands. Our technicians stock common boards, remote receivers, and arm hardware locally, which keeps many 33161 repairs to a single visit. See our brands for the full range we diagnose and repair.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in North Miami, FL
| Service | Typical range in North Miami |
|---|---|
| Gate hinge replacement | $180 – $450 |
| Gate post repair or replacement | $350 – $900 |
| Sagging gate alignment | $200 – $500 |
| Manual gate latch or lock repair | $125 – $350 |
| Electric gate diagnostic visit | $95 – $150 |
| Control board replacement | $500 – $1,400 |
| Gate operator motor replacement | $750 – $1,900 |
| Loop detector or safety sensor replacement | $250 – $700 |
| Basic manual driveway gate installation | $2,000 – $4,500 |
| Automatic gate installation | $4,500 – $12,000 |
| Full electric gate replacement | $6,000 – $16,000 |
| Emergency gate repair service | $250 – $750 |
What pushes a North Miami gate job toward the higher end of those ranges is usually salt corrosion that has spread beyond one component, a post that needs to be re-set in new concrete, or an older automatic system where the board and motor both need replacing at once. Whatever the job, the price is quoted and agreed before any work starts, so there is no surprise on the invoice.
Neighborhoods We Serve in North Miami
Most of our North Miami work happens across the 33161 ZIP code, from the older mid-century streets near NE 125th Street down through the blocks around Griffing Boulevard and east toward Keystone Point. We are familiar with the HOA requirements and setback rules that apply in different parts of the city.
- Keystone Point
- Arch Creek area
- North Miami Central
- San Souci estates
- Griffing Estates
Service Area – Cities Near North Miami
Miami Gate Company serves North Miami and the surrounding communities along the Biscayne corridor. If you are in Biscayne Park, FL, Bal Harbour, FL, Bay Harbor Islands, FL, or Surfside, FL, we can schedule a gate evaluation and provide a written quote for repair or installation.
Serving North Miami, FL — Our Local Coverage Area
We’re based in the North Miami area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in North Miami
For emergency gate failures in the 33161 area, we prioritize calls from North Miami and can usually schedule a diagnostic visit on the same or next business day. If a gate is stuck open, call (833) 570-5807 and describe the symptoms, and we will confirm a window based on current availability.
Yes. Automatic gates that control vehicle access typically require a Miami-Dade permit, and most North Miami HOAs have written rules about gate style, height, finish, and setback. We work within those requirements and will flag any HOA pre-approval you need before installation begins.
We schedule service by appointment across North Miami and the surrounding area, including early and late windows when the property needs a gate functioning before or after business traffic. Call (833) 570-5807 and we will find a time that works without leaving the gate stuck open overnight.
Call Miami Gate Company at (833) 570-5807 for a free estimate on gate installation in North Miami, FL.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What North Miami Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Arjun Sharma"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Chris Norris"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Alma Vargas