Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across North Miami
Electric gate repair in North Miami usually comes down to one thing: salt. The neighborhoods packed into 33161 sit close enough to Biscayne Bay that the air itself eats at hinges, posts, and operator mounts years before inland gates show the same wear. We’re Miami Gate Company, and gates are all we do. If your swing gate is sagging off-level, a slide gate is binding on its track, or an operator stopped responding after the last storm, call (833) 570-5807. We’ll diagnose the actual failure, not just the obvious symptom, and give you a straight price before any work begins.
Why Miami Gate Company Is North Miami’s Preferred Electric Gate Repair Company
We’re not a fencing crew that happens to hang a gate at the end of the job. We service nine major gate and operator brands including LiftMaster, FAAC, BFT, DoorKing, and Mighty Mule, and our technicians are trained specifically on gate mechanics and automation. That focus shows in the diagnosis. When a North Miami homeowner calls about a gate that won’t open, we check the motor, the control board, the safety sensors, and the wiring, not just the arm that’s visibly rusted. Brand-agnostic means we fix what you have. We’re not here to sell you a system you don’t need. Ruben Castellano leads the team, and every job we take in North Miami gets the same standard: the right repair, on the gate you own, at a price you approved before we touched a single bolt.
North Miami’s housing stock shapes how we work here. Much of 33161 is 1940s to 1960s concrete-block construction, often with original or reworked driveway gates hung on cinder-block walls. That means hinge-post work usually involves anchoring into masonry, not just swapping hardware. We know the difference, and we’ve done it on enough NE 6th Ave streets that we can usually tell you what’s wrong from a short description before we even arrive.
Styles & brands we work with





Gate Access Control in North Miami
Gate Access Control in North Miami means more than a keypad. It’s the full chain that decides who gets in: the keypad or card reader, the antenna, the loop detector if your driveway has one, the control board that interprets the signal, and the relay that tells the operator to move. When a gate opens for some codes but not others, or the remote works from the street but not from the driver’s seat, the problem is usually in that chain, not the motor itself. In North Miami’s older multifamily buildings and the single-family homes along NE 135th St and NE 125th St, we see access control issues tied to salt exposure at external keypads and rust creep on antenna connections. A keypad that flickers or works only when you press hard is often corroded internally, and that’s a repair, not a replacement.
Keypad and Remote Programming
We reprogram, replace, and reinstall keypads and remotes for every major brand. If you’ve lost a remote in North Miami, call before you order a replacement online. We stock common units locally and can pair them the same visit. An access control job like this typically runs $120 to $275 in North Miami depending on the hardware.
Loop and Sensor Work
Driveway loops buried under concrete or asphalt can fail from moisture and age, and in 33161’s summer rains, water intrusion into the loop splice is a recurring culprit. We test the loop, replace the splice when possible, and only cut the pavement when it’s truly dead. Sensor replacement on a North Miami gate, including safety edges and photocells, generally falls between $150 and $350 per sensor.
Commercial Gate Operator in North Miami
Commercial Gate Operator in North Miami work is its own discipline. A commercial sliding gate on a low-rise building along Biscayne Blvd or a multifamily property off West Dixie Hwy cycles hundreds of times a day. The operator has to handle that duty cycle without overheating, and the safety edge, loop detector, and entrapment protection all have to work together. When a commercial operator fails, it’s rarely one clean cause. It’s a board that’s been running hot for months, a chain drive that’s been binding since the last heavy rain, and a safety loop that started intermittent overtime. We diagnose at the component level and give property managers in North Miami a straight answer: fix what’s failing, or replace it when the cost of the repair stops making sense. A commercial operator replacement in North Miami, installed and programmed, typically runs $2,800 to $5,600 depending on the gate size and operator class. A board-level repair might be $400 to $900. We quote the exact number before we start.
Cycle Duty and Motor Selection
Most commercial gate failures we see in North Miami come down to an operator that wasn’t rated for the gate’s actual duty cycle. If your gate runs all day at a condo or commercial lot, it needs a continuous-duty motor, not a residential swing motor. We spec the operator to the gate, not the other way around; the brand-agnostic approach means we recommend what the gate needs, not what a single manufacturer incentivizes.
Safety Compliance and Inspections
Commercial gates in North Miami must meet Miami-Dade entrapment protection standards, which include accessible emergency cutoffs and working safety devices. If your gate was installed years ago or was damaged in a storm, the safety edges may be brittle, the photocell lenses cloudy from salt, and the warning signs faded beyond recognition. We bring all of it back to code; that’s part of every commercial gate operator job we take in the 33161 area, not an add-on.
Trusted Brands We Service in North Miami
We work on virtually any gate system. Whatever brand you have, we know it. In North Miami we regularly service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and that’s not a sales pitch; it’s the reality of working on this city’s housing stock. The 33161 area has a deep mix of original mid-century operators, newer DIY-installed units, and commercial systems, and no single brand dominates. For our North Miami customers specifically, we keep common components on the truck: DoorKing boards, Elite remotes, Mighty Mule arms, and Ghost Controls parts for the homeowners who installed their own systems and need someone to take it from here. That local stocking means shorter waits on the most common repairs.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in North Miami Homes
North Miami’s salt air, humidity, and hurricane seasons produce a specific set of failures. Here’s what we actually see most:
- Bottom hinge seizure and post settlement. On the older concrete-block and cinder-block walls throughout 33161, the bottom hinge rusts into the bracket and the post starts to sag. The gate panel drops, scrapes, or stops sealing, and the fix usually means re-anchoring into masonry, not just spraying lubricant.
- Operator arm mount corrosion on swing gates. Salt air pits the steel at the arm mount, the mount cracks under repeated wind load, and the gate swings out of alignment. By the time the panel is dragging, the operator has been fighting the misalignment for months and the board is often close to failure.
- Rack and pinion binding after summer rain. On slide gates along older driveways, heavy rain washes grit and salt into the rack teeth, the gate binds, and the operator burns out trying to move it. Cleaning and re-aligning the drive early can save the motor entirely.
- Control boards failing after power surges. North Miami’s summer storms knock out power and send surges through gate boards, especially on systems without a surge protector. The motor is fine, the board is dead, and a $300 to $550 board replacement brings the whole system back.
Pricing for Electric Gate Repair in North Miami, FL
We quote every North Miami job before work begins. That’s a firm number, not an estimate that grows after we open the housing. A typical gate motor repair in North Miami runs $280 to $650 depending on the motor and what’s failed. Keypad and remote programming lands between $120 and $275. Safety sensor or photocell replacement runs $150 to $350 per sensor. A control board replacement is usually $300 to $550. A full commercial operator replacement in North Miami is a larger job, typically $2,800 to $5,600 installed, depending on the gate’s size and duty cycle. Salt-corrosion hinge and post repairs on the older 33161 cinder-block walls add anchoring work that inland homes don’t need, and that’s reflected honestly in the quote. Call (833) 570-5807 for an exact price on your gate. Estimates are free.
We Also Serve Cities Near North Miami
Beyond the 33161 streets, we regularly serve North Miami neighbors in Biscayne Park, Bal Harbour, Bay Harbor Islands, and Surfside. If your gate is misbehaving in any of these nearby communities, you’re still getting the same gate-only expertise. When you call, tell us what the gate is doing, or not doing, and we’ll start the diagnosis on the phone. This is our full Electric Gate Repair operation, so no matter which side of the city limit you’re on, the truck is stocked and the team is ready.
Serving North Miami, FL — Our Local Coverage Area
We’re based in the North Miami area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in North Miami
North Miami sits close enough to Biscayne Bay that salt-laden air, combined with subtropical humidity and heavy summer rain, attacks exposed steel constantly. Bottom hinges and operator arm mounts catch the worst of it because they hold moisture and salt against the metal at exactly the points under the most mechanical stress. Inland Miami gates of the same age typically wear at the track or rollers first; in 33161, it’s the hinge and the arm mount that go first.
The bottom hinge seizes and the hinge post rots or settles where the cinder-block wall meets the concrete footing. On swing gates, the operator arm mount pits and cracks from salt corrosion before the control board fails, throwing the panel off level. On slide gates, the rack and pinion or chain drive gums up and binds after heavy summer rain, which burns out the operator. The board may still be fine; the mechanical failure cascades into the electrical one. That’s why we diagnose the whole system, not just the component that stopped. Call (833) 570-5807 and we’ll walk you through what’s likely on your gate before we even arrive.
Yes. Any automatic gate in North Miami must meet Miami-Dade entrapment protection requirements, which means working safety edges, photocells, and the proper wiring to sense and reverse if something or someone is in the gate’s path. Many older systems in 33161 were installed before current standards tightened, and we routinely find safety edges that are brittle from sun and salt, photocell lenses clouded over, and wiring that’s only one splice away from failure. If you’re not sure your gate would reverse on contact, treat it as a repair priority; this is a safety issue, not a convenience. We’ll inspect it and give you a straight answer.
It can, and it should. Much of North Miami’s 33161 housing is mid-century concrete-block construction with driveway gates spaced close to the street and home. When we re-anchor a hinge post into a cinder-block wall, we drill and set stainless fixings to wind-load spec, not just to hold the gate on a calm day. If your gate also serves as a pool barrier, we check height, the gap at the bottom, and the latching mechanism. On a recent job off NE 6th Ave, we corrected a sagging LiftMaster swing gate on a mid-century concrete-block wall, replaced the galvanised hardware with stainless fixings, and re-anchored the arm mount. That gate has swung clean through two hurricane seasons.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we stock common parts for several of them locally for North Miami jobs. Brand-agnostic matters here because 33161 has such a mixed housing stock, everything from original mid-century operators that are still running to DIY Mighty Mule and Ghost Controls systems. We fix what you have rather than pushing a replacement you don’t need. Call (833) 570-5807 for a free estimate.
Written by Ruben Castellano, Owner at Miami Gate Company, serving North Miami and the 33161 area.