Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Edgewood
Gate repair in Edgewood usually comes down to one of three things: a post that’s shifted in the sandy soil, an operator that’s fighting humidity and corrosion, or a custom gate that’s drifted out of alignment. We fix all three, and we do it with a level of brand-specific knowledge most general contractors can’t match. Our techs work on LiftMaster, FAAC, BFT, DoorKing, and Mighty Mule systems every week, so when we show up at your Edgewood home, we already know what we’re looking at. Call (833) 570-5807 and we’ll get someone out to look at it.
Why Miami Gate Company Is Edgewood’s Preferred Gate Repair Company
Edgewood’s gates sit on tricky ground. The soil here drains fast, shifts after every heavy rain, and slowly works posts out of plumb year after year. Most gate companies see a dragging gate and throw new hinges at it. Ruben Castellano trained our team to look deeper, at the footing, the mounting points, and the operator geometry first. That’s why clients off Edgewood Road and around Lake Jessamine keep calling us back when a different problem shows up.
We’re a gate-only company. That matters more in Edgewood than most places because the housing stock here runs to custom ornamental iron and decorative aluminum, work that requires welding, fab matching, and operator calibration, not just a wrench and a can of WD-40. Whether you’re a homeowner on a quiet street or a property manager handling an HOA entrance, you get a tech whose entire week has been gates. Not fences with gates on the side.
Ruben Castellano’s approach is simple: fix what you have, match what exists, and only recommend replacement when the math genuinely favors it. We’re brand-agnostic by design. A DoorKing board gets diagnosed honestly, an Elite ram gets a straight read on repair versus replace, and a Ghost Controls system gets exactly the parts it needs, nothing upsold.
Styles & brands we work with
Commercial Gate Repair in Edgewood
Commercial gate repair in Edgewood tends to involve the few small office plazas, community entrances, and gated driveways serving larger lots along Orange Avenue and the streets feeding into it. These systems run more cycles per day than a residential gate runs in a month, which means operator wear shows up faster. Bearings, gear racks, safety loops, and control boards take the brunt of it. We service LiftMaster and FAAC commercial operators down to the component level, including loop detectors and photoelectric edges that keep the gate code-compliant.
Cost for commercial gate work in Edgewood depends on the failure point. A basic safety loop replacement or limit switch adjustment runs $200 to $450. A control board swap on a FAAC or BFT slide operator typically lands between $650 and $1,200. Full drive-unit rebuilds on high-cycle commercial systems start around $1,500 and go up from there based on the gate’s size and operator type. We quote the number before we start. No work happens without your sign-off on the price.
Operator and Control Board Diagnostics
When a commercial operator stops responding or cycles erratically, we test the board inputs, motor windings, and safety circuit before recommending anything. Most Edgewood commercial failures trace back to voltage drops, corroded terminals, or a failed loop detector, not the motor itself. We fix the actual fault and document what we found.
Safety Loop and Photocell Service
Every commercial gate in Edgewood has to meet current safety standards, and that means functioning loops and photo eyes. We replace cracked loop wire, tune detector sensitivity for Central Florida’s sandy soil conditions, and clean or replace photocell lenses that have clouded from UV exposure and humidity.
Iron Gate Repair in Edgewood
Iron gate repair in Edgewood is far more common than most people expect, largely because custom wrought-iron and ornamental steel gates are the default choice on the mid-century and 1990s lots here. These gates are heavy. When the post footing settles into sandy soil, the entire panel tilts and the gate starts dragging or binding at the latch. Hinges get blamed. They’re usually not the real problem.
We re-set post footings, re-hang panels, weld cracked frame joints, and blast-and-treat rust before it eats through the pickets. For decorative work around garden entrances, we match the existing metal pattern and refinish to blend, not stand out. Expect to pay $150 to $350 for hinge replacement and realignment on a standard residential iron gate, $300 to $700 for post re-setting with new concrete footing, and $500 to $1,500 for weld repairs, rust remediation, and repainting depending on panel size and damage.
Post Footing Repair and Re-Setting
Sandy Central Florida soil doesn’t hold a post the way clay does. After a few storm seasons, the footing loosens, the post leans, and the gate geometry fails. We excavate around the existing footing, re-set the post with proper depth and concrete, and re-hang the gate so it swings clean.
Weld Repair and Rust Remediation
Humidity here accelerates rust on older iron work. We grind out corroded sections, weld in replacement steel, and refinish with corrosion-resistant primer and paint matched to your existing gate. Small cracks get caught before they become structural failures.
Trusted Brands We Service in Edgewood
We work on virtually any gate system, and that’s not a slogan. Our techs carry diagnostics and parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Edgewood customers with older or less common systems, we stock common boards, remotes, and safety components locally so turnaround stays short. If your gate has a brand label we haven’t seen before, we’ll still diagnose it. Gates are all we do, and that focus shows in the diagnosis. One specialist for repair, installation, and everything in between.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Edgewood Homes
- Post lean in sandy soil. Older Edgewood lots with decorative driveway gates often have original footings that were poured shallow. After heavy summer thunderstorms, the post tilts, the gate drags, and the hinges wear out twice as fast as they should. Re-setting the footing fixes the actual problem.
- Operator corrosion from humidity and sun. The rack and pinion on many automatic gate systems rusts and binds after a few humid Florida summers. Homeowners blame the motor, but the gear track is usually what’s fighting the operator. We replace or re-lubricate the rack and get it moving again.
- Photocell and safety edge failures. Intense UV exposure clouds the safety photocell lenses on ornamental gates. When the lens degrades, the system reads a phantom obstruction and stops halfway or reverses for no visible reason. We clean or replace the lens and verify the whole safety circuit.
- Fence-line shift throwing the latch. Many Edgewood gates are mounted to wood or masonry fence lines that have settled over the years. The gate itself is fine, but the latch and keypad strike plate are now out of alignment, so the lock binds or the keypad entry only works sometimes. We realign the gate to the new fence position and re-set the latch throw.
Pricing for Gate Repair in Edgewood, FL
A standard residential gate repair in Edgewood usually runs $180 to $500 depending on the failure. Simple hinge replacement and realignment on a decorative aluminum garden gate lands around $150 to $250. Electric gate repairs involving limit switches, safety photo eyes, or remote receiver troubleshooting range from $200 to $450. Control board replacement on a LiftMaster or DoorKing swing operator typically runs $550 to $1,100. Full operator replacement and post re-setting starts around $1,000 and climbs with gate size and automation features. We quote the exact price before any work begins, so there’s never an invoice surprise. Call (833) 570-5807 for a free estimate.
Because Edgewood is only about a square mile but is an incorporated city surrounded by Orlando, a single street here can simultaneously fall under Orange County, Edgewood city, and HOA rules. So every gate repair has to be checked against three layers of jurisdiction before we touch a hinge post. On a heavily treed lot off Edgewood Road, our crew was called to a custom wrought-iron swing gate that had dragged for months after storm season. The homeowner had already replaced the hinges twice. We found the original post footing had settled in the sandy soil, tilting the hinge post and throwing the whole panel out of plumb. We re-set the footing, corrected the sag, and then rebalanced the LiftMaster operator so the gate ran silently again. The decorative aluminum matching gate at the garden entrance got a fresh set of stainless hinges and a photocell check while we were there. That’s the difference between fixing the symptom and fixing the gate. Our Gate Repair team does this work every day across Edgewood and the surrounding Orange County communities.
We Also Serve Cities Near Edgewood
Our service area covers Edgewood and the nearby Orange County cities of Belle Isle, Pine Castle, Sky Lake, and Holden Heights. If you’re a property manager handling multiple locations or a homeowner whose property sits on the Edgewood-Orlando line, we’ll still come out. Geographic borders don’t decide where a gate stops working.
Serving Edgewood, FL — Our Local Coverage Area
We’re based in the Edgewood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Edgewood
No. In Edgewood, a gate that sags after every storm season almost always has a post footing problem, not a hinge problem. The sandy Central Florida soil lets the footing settle and the post tilt, which throws the gate out of plumb regardless of how new the hinges are. We re-set the footing, plumb the post, and re-hang the gate. Only after that do we evaluate the hinges. Call (833) 570-5807 and we’ll tell you which problem you actually have.
Often all three. Edgewood is an incorporated city of about a square mile surrounded by Orlando, and a single street can have Edgewood city code, Orange County code, and HOA covenant requirements applying at the same time. We check the applicable rules for your specific property before we touch a hinge post or run any wiring, so you don’t get a compliance letter after the repair.
Not necessarily. On a LiftMaster swing gate in Edgewood, a halfway stop usually points to a safety photocell alignment issue, a corroded rack and pinion binding the travel, or a limit switch that’s drifted. We test the operator, the safety circuit, and the mechanical travel before blaming the motor. Often the fix is a $200 alignment and sensor cleaning, not a $900 board.
Yes. We service FAAC and BFT operators regularly and stock or source parts for both brands. For custom fabricated gates in Edgewood, we also handle the mechanical side, hinges, post plates, and weld repairs, so the operator and the gate get fixed in one visit. Brand-agnostic means we fix what you have, not what we’d rather sell you.
Intermittent keypad failure usually means the latch or strike plate has shifted out of alignment, so the lock only catches when the gate sits in exactly the right position. In Edgewood, that’s often caused by fence-line settling pulling the gate slightly off its original alignment. We realign the gate, re-set the latch, and test the keypad’s power and signal. Call (833) 570-5807 for an exact quote – estimates are free.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Edgewood and Orange County gate repair needs.