Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Edgewood, FL
Gate installation in Edgewood means working with two things every local contractor learns to respect: sandy Central Florida soil and an HOA that notices everything. Most homes here sit on lots built between the 1950s and 1990s, where original fence lines have shifted, posts have leaned, and the gate that never quite closed right after a summer thunderstorm is now dragging across the driveway apron. We install automatic and manual gates built to handle that reality, from decorative aluminum driveway gates to solid wrought-iron garden gates. Miami Gate Company has served Edgewood since 2012, and gates are all we do. For a free estimate, call (833) 570-5807.
Why Edgewood Homes Are Different
Edgewood is a small, heavily residential enclave of Orange County surrounded by Orlando, about one square mile of mostly mid-century to 1990s single-family homes. The gates here are overwhelmingly custom ornamental metal or vinyl attached to fence lines that have settled in sandy soil. That matters because a gate post that has tilted two inches does not just need a hinge adjustment. It needs to be pulled, re-set in fresh concrete, and re-hung so the gate travels true. We see this on nearly every older lot in the 32890 ZIP code when we arrive for a gate install or repair.
The climate works against hardware, too. Intense summer sun bakes powder-coated finishes, high humidity corrodes hinges and latch bodies, and heavy afternoon thunderstorms soak the ground around posts. After storm season, the dominant calls are sagging gates, corroded hinges, and posts that have shifted enough to throw the gate out of alignment. In Edgewood, because the city is so compact, a single street can sit under Orange County, Edgewood city, and HOA rules all at once. That means before we set a post or mount an operator, we check what the HOA allows for finish, height, and placement. It saves our customers from a citation later, and it is part of why installs here go smoother when a gate specialist handles the job from the start.
Styles & brands we work with
Our Main Edgewood Services
Edgewood homeowners call us for two things more than anything else: a gate that will not stay closed or latched, and an electric operator that has stopped responding. Both jobs benefit from the same specialist approach, because a physical gate problem and an electrical gate problem are often connected in this soil and climate.
Gate Repair in Edgewood
Gate repair here is overwhelmingly residential, aesthetic, and HOA-visible. A dragging gate scrapes the driveway, wears the hinges, and eventually tears the post out of the ground. We handle hinge replacement, post re-setting, latch and lock work, and full gate re-hanging on existing fence lines. Because Edgewood lots sit on sandy soil, we almost always check post plumb and footing depth before assuming the problem is just a hinge. Most homeowners in 32890 are dealing with ornamental aluminum or wrought iron, and matching the existing finish matters for HOA compliance. Gate Repair in Edgewood is our most requested residential service.
Electric Gate Repair in Edgewood
Electric gate repair in Edgewood often starts with a homeowner holding a remote that does nothing. We diagnose the motor, control board, safety sensors, and wiring, not just the obvious parts. High humidity and lightning from afternoon thunderstorms take a toll on control boards and loop detectors. The sandy soil also shifts, which can knock an operator’s limit switches out of calibration, so the gate closes halfway or reverses for no reason. We work on virtually any system, whatever brand you have, we know it. Electric Gate Repair in Edgewood covers the full electrical side, from wiring to remotes.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Edgewood
Gate installation in Edgewood usually means a custom ornamental metal gate on a driveway or garden entry, built to match the home and pass HOA review. The specific problem we solve here is building for sandy soil and Florida drainage: posts set deeper than the local fence contractor did in 1985, with concrete footings that resist the seasonal wet-dry cycle. Whether you are replacing a tired wooden gate or putting in a new automatic driveway gate, we quote the full job before any work starts, so there are no surprises when the gate is standing. As a gate specialist, we handle the full installation from concept to operational gate; see Gate Installation for the complete scope.
Automatic Gate Installation
Signs you need it
You are opening and closing a manual driveway gate multiple times a day, or you want to secure the property with a system you can operate from the car.
What it costs in Edgewood
Automatic gate installation in Edgewood typically runs $4,500 to $12,000+, depending on the operator, gate size, and whether we are running new power to the post.
How we do it
We set the posts on deep concrete footings, fabricate or mount the gate, install the operator and safety edges, wire the control board, and program remotes and keypad access on site.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is sagging, rusted through, or too narrow for the vehicles you now drive.
What it costs in Edgewood
Driveway gate installation in Edgewood generally runs $3,500 to $15,000+, influenced by gate width, material, and whether the job is a single gate or a paired double gate.
How we do it
We measure the opening, match the gate to the existing fence line, set or reinforce posts, hang the gate with adjustable hinges, and then align and test it through the full swing arc.
Sliding Gate Installation
Signs you need it
Your driveway slopes sharply or opens onto Orange Avenue traffic, so a swing gate would be either unsafe or impossible to fully open.
What it costs in Edgewood
Sliding gate installation in Edgewood typically costs $5,000 to $18,000+, because it requires the track, the roller assembly, and a cantilever or V-track foundation.
How we do it
We pour the receiver and track pad, set the gate on its rollers, mount the operator and rack, install the safety photo eyes, and tune the travel limits so the gate opens and closes without slamming.
What Gate Installation Costs in Edgewood
| Item | Typical range in Edgewood |
|---|---|
| Automatic gate installation | $4,500 – $12,000+ |
| Driveway gate installation | $3,500 – $15,000+ |
| Sliding gate installation | $5,000 – $18,000+ |
How long does a gate installation take in Edgewood?
Most Edgewood gate installations run two to four working days from post setting to final programming. Automatic systems may add a day for the control board and remote setup.
Do I need HOA approval before installing a gate in Edgewood?
In most Edgewood neighborhoods, yes. We can help with finish and style details for the HOA application, and we quote the job with those approvals in mind so the install is not delayed.
Brands We Service in Edgewood
We service Gate Installations and Electric Gate Repairs across Edgewood on Ghost Controls, DoorKing, Elite, and Mighty Mule systems, among others. Because we are brand-agnostic, we stock a range of common boards, receivers, and safety edges locally, which shortens turnaround when a Florida storm fries a board. No single dealership pushing one line: we fix what you have. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Edgewood, FL
| Service | Typical range in Edgewood |
|---|---|
| Automatic gate installation | $4,500 – $12,000+ |
| Driveway gate installation | $3,500 – $15,000+ |
| Sliding gate installation | $5,000 – $18,000+ |
| Gate operator installation | $1,200 – $3,500 |
| Gate opener installation | $900 – $2,800 |
| Electric gate opener repair | $250 – $900 |
| Gate opener repair | $200 – $600 |
| Automatic gate repair | $300 – $1,500 |
| Gate motor repair | $250 – $1,000 |
| Gate hinge repair or replacement | $150 – $400 per hinge |
| Gate sensor repair or replacement | $150 – $450 |
| Gate remote repair or replacement | $75 – $250 |
In Edgewood, prices push toward the higher end when a post has to be dug out of sandy, root-bound soil and re-set, or when an HOA requires a specific ornamental finish. Every job is quoted and agreed before any work begins, so the invoice does not grow on its own.
Neighborhoods We Serve in Edgewood
Edgewood is small enough that we reach every street in 32890 without a long dispatch, but a few areas call more often than others. We regularly work through these neighborhoods:
- Lake Edgewood Drive area
- Edgewater Drive corridor
- Holden Avenue homes
- North Orange Avenue frontages
- Adams Street and side streets
Because the city is so compact, most Edgewood gate service calls can be scheduled without waiting on a far-off route. Call (833) 570-5807 and we will give you a realistic arrival window.
Service Area – Cities Near Edgewood
Our Edgewood work regularly extends into the neighboring Orange County communities that share the same soil, climate, and older housing stock. We serve Belle Isle, FL, Pine Castle, FL, Sky Lake, FL, and Holden Heights, FL with the same gate specialist approach: quote first, build to the local conditions, and never push a replacement you do not need.
Serving Edgewood, FL — Our Local Coverage Area
We’re based in the Edgewood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Edgewood
Edgewood is inside our regular Orange County service area, and because the city is so compact, we schedule most calls within days. For a broken gate that will not close, call (833) 570-5807 and we will give you the first available slot based on the job type.
The work usually does not require a city permit unless the gate is being built new, but Edgewood HOAs often have finish, height, and placement rules. We check those before installing, so the gate looks right and the HOA has nothing to flag.
We cover all of Edgewood’s 32890 ZIP code plus the nearby Orange County cities of Belle Isle, Pine Castle, Sky Lake, and Holden Heights. If you are on the edge of Edgewood and Orlando, call (833) 570-5807 and we will confirm the address on the spot.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Edgewood Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Ramon Salazar"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Bryant"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Ryan Miller