Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fort Myers Shores, FL
Gate installation in Fort Myers Shores usually means one of two jobs: replacing a 40-year-old iron gate that’s rusted through at the bottom rail, or adding a new automatic driveway gate to a canal-front property where the terrain and moisture demand a deeper footing and better-sealed electronics. The housing stock here, mostly 1960s to 1980s ranch homes on large lots, means we see a lot of original builders’ gates that were never designed for salt-laden air. Call (833) 570-5807 and we’ll walk you through what your specific property needs.
Why Fort Myers Shores Homes Are Different
Fort Myers Shores sits right along the Caloosahatchee River, and the Rubicon canal network that runs through the neighborhood means a high percentage of driveway gates sit close to water. That’s not a cosmetic detail; it changes how a gate wears. Salt spray from boat traffic and Gulf breezes accelerates rust on iron gates and aluminum hardware, while afternoon thunderstorms dump enough rain in an hour to leave canal banks soft and mucky. We’ve reset more than a few gate posts in Fort Myers Shores that were originally set in footings sized for inland soil, not for a post that would sit near a canal that shifts with tidal water levels.
The original homes here were built from the 1960s through the 1980s, and many still carry their original chain-link or ornamental iron gates. Those gates weren’t installed with automation in mind, so a lot of the work we do is adapting older gate frames to modern operators without replacing the entire structure. That requires a different set of skills than bolting a new kit onto a fresh post, and it’s one of the reasons homeowners in Fort Myers Shores tend to call a gate specialist rather than a general contractor. High humidity also means control boards and wiring connections corrode faster here than they would a few miles inland, especially on properties where the operator housing sits exposed to morning river fog.
Styles & brands we work with
Our Main Fort Myers Shores Services
When a gate stops working in Fort Myers Shores, it’s usually one of two things: a mechanical failure from rust or storm damage, or an electrical failure in the operator, board, or sensors. Here are the two services homeowners call about most.
Gate Repair in Fort Myers Shores
A sagging iron gate, a concrete-filled post that’s cracked at the base, hinges that screech and bind, or a gate that drags across the driveway after a storm. These are the mechanical failures we see regularly in Fort Myers Shores, and they’re almost always worsened by the local combination of humidity, salt air, and soft canal-adjacent soil. We service the full range: chain-link, ornamental iron, aluminum, and tube steel gates. For the full breakdown of what gate repair covers in this area, see our dedicated Gate Repair in Fort Myers Shores page.
Electric Gate Repair in Fort Myers Shores
When the operator hums but the gate doesn’t move, or the gate opens halfway and reverses, or the remote works only from three feet away, the problem is almost always in the motor, control board, safety sensors, or wiring. Fort Myers Shores’ humidity and frequent lightning storms make electrical gate failures more common here than in drier parts of Lee County. We diagnose at the component level, and we work on most major operator brands rather than pushing you toward a replacement you don’t need. Details on Electric Gate Repair in Fort Myers Shores are covered on that page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Fort Myers Shores
A new gate installation in Fort Myers Shores needs to account for three things: a driveway that’s often long and concrete, a climate that punishes hardware, and in many cases a property that sits near a canal where the soil moves more than you’d expect. We handle the full job, from the first measurement through final automation, which is why our Gate Installation service is built around completing the whole project ourselves rather than handing off pieces to other trades. Whether you’re replacing a rusted original gate or adding a new automatic gate to a property that’s never had one, we quote the full project upfront so you know the total before anything goes in the ground.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open a manual gate every time you come home, or you want controlled access to a long driveway that’s hard to see from the house.
What it costs in Fort Myers Shores
Expect a full automatic gate installation to run between $4,500 and $12,000 depending on gate material, operator type, and the amount of concrete and electrical work required.
How we do it
We start by measuring your driveway width and slope, then recommend a gate style and operator that actually fits the terrain, and install the gate, operator, wiring, and safety edges as one coordinated job rather than leaving you to coordinate subcontractors.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through at the bottom rail, the post footing is cracked and leaning, or you have no gate at all and want one built to match the scale of a wide Fort Myers Shores driveway.
What it costs in Fort Myers Shores
A basic single driveway gate starts around $1,500 to $3,500 for manual operation, while larger ornamental or custom gates typically fall between $3,500 and $8,000 installed.
How we do it
We set new posts with footings sized for soil near the canals, hang the gate with hardware rated for salt exposure, and make sure the bottom clearance accounts for any ground that shifts during the rainy season.
Sliding Gate Installation
Signs you need it
Your driveway slopes toward the house, or the gate swings across a sidewalk or canal bank where a swing gate would hit obstacles or require too much clearance.
What it costs in Fort Myers Shores
Sliding gate installations generally run $3,000 to $9,000 depending on gate width, track or cantilever style, and operator specs.
How we do it
We check the soil and grade first, because a sliding gate on a canal-adjacent lot needs a track or cantilever footing that won’t sink or bind after a summer of storms, then set the gate and operator to travel cleanly through the full cycle.
What Gate Installation Costs in Fort Myers Shores
| Item | Typical range in Fort Myers Shores |
|---|---|
| Manual driveway gate, single | $1,500 – $3,500 |
| Automatic gate with operator | $4,500 – $12,000 |
| Sliding gate system | $3,000 – $9,000 |
Do I need a permit for a new gate in Fort Myers Shores?
Most new gate installations in unincorporated Lee County, which includes Fort Myers Shores’ 33905 ZIP, require a permit when the gate includes a concrete footing, electrical work, or an automatic operator. We handle the permit paperwork as part of the installation, and we’ll tell you at the quote stage exactly what your specific project triggers.
How long does a gate installation take in Fort Myers Shores?
A straightforward manual gate usually goes in within one to two days on site, while an automatic system on a canal-front lot can take three to five days when you include the footing, operator wiring, and sensor calibration. We’ll give you a written schedule with your quote, not a vague estimate.
Brands We Service in Fort Myers Shores
We work on gate operators and hardware from Ghost Controls, DoorKing, Elite, and Mighty Mule, among others. That matters in Fort Myers Shores because many of the original gates here were paired with whichever brand was in stock at install time decades ago. See our brands page for the full range of systems we carry and service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fort Myers Shores, FL
| Service | Typical range in Fort Myers Shores |
|---|---|
| Gate repair, basic | $150 – $450 |
| Gate repair, major (replacement parts) | $450 – $1,500 |
| Electric gate repair | $225 – $700 |
| Operator replacement | $800 – $2,500 |
| Manual driveway gate, single | $1,500 – $3,500 |
| Automatic gate with operator | $4,500 – $12,000 |
| Sliding gate system | $3,000 – $9,000 |
| Gate post reset or replacement | $300 – $900 |
What pushes a gate repair price up in Fort Myers Shores is usually the location: a gate post that has to be reset in canal-adjacent soil costs more than one in a dry inland yard, and a full operator replacement on a 1980s gate frame often means redoing the mounting plate and wiring, not just swapping the box. Whatever the job, we give you a written price and agree on it before any work starts.
Neighborhoods We Serve in Fort Myers Shores
Fort Myers Shores is compact but the character of the work changes block to block. Canal-front homes near the Rubicon system need different footing and hardware approaches than the ranch homes set back on the interior lots, where the gates tend to be wider and the driveways longer. We cover the entire 33905 area, typically responding to repair calls within one to two business days.
- Fort Myers Shores proper, including the canal frontage along the Rubicon system
- Residential streets off Palm Beach Boulevard
- Manufactured home communities throughout the 33905 ZIP
- Large-lot ranch homes along the neighborhood’s northern edge
- Canal-front and river-adjacent properties near the Caloosahatchee
Service Area – Cities Near Fort Myers Shores
We regularly take on gate projects in the communities around Fort Myers Shores, including Buckingham, FL, where the lots are larger and the setbacks are deeper. To the east, we serve Olga, FL and the newer developments around Gateway, FL, where HOA standards often dictate gate style and operator type. A bit north, Tice, FL has a mix of older residential gates and small commercial properties we handle as well.
Serving Fort Myers Shores, FL — Our Local Coverage Area
We’re based in the Fort Myers Shores area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fort Myers Shores
Most non-emergency repairs in Fort Myers Shores are scheduled within one to two business days. If a gate is stuck open and you can’t secure the property, or it’s stuck shut blocking your cars, tell us when you call and we’ll prioritize getting a technician out to you sooner based on the day’s schedule.
Some canal-front and manufactured home communities in the 33905 area have architectural review requirements that affect gate height, material, and color. We’ve worked through those reviews enough times that we can usually tell you what your specific HOA is likely to require, and we’ll prepare the paperwork they need as part of the installation quote.
We cover the entire 33905 ZIP code, from the riverfront and canal lots to the interior ranch homes and manufactured home communities. There’s no extra trip charge for any part of Fort Myers Shores, and we quote every job based on the actual work, not the address.
If your gate is rusting, sagging, or the opener isn’t responding, call us at (833) 570-5807 for a free estimate. We’ll tell you what’s wrong, what it costs to fix or replace, and what makes sense for your specific Fort Myers Shores property.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Myers Shores Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Javier Mendoza"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Ramon Salazar"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Bryant