Electric Gate Repair in Tice — Same-Day Repair, Priced Before We Start

Fast, Reliable Electric Gate Repair Across Tice

Most electric gate failures in Tice come down to power and span. Long driveways off Palm Beach Boulevard mean wide gates, often running on solar because there’s no practical way to trench a 120V line to the entrance. When those systems fail, the gate usually dies mid-driveway. We get them running again, usually on our first trip. If your gate is stuck open, stuck closed, or halfway between, call (833) 570-5807 and we’ll head out to Tice.

Call (833) 570-5807

We know this area’s gates run older, heavier, and harder than what you’d find in a gated subdivision. Many were installed decades ago on chain-link or welded-steel frames, hung on posts that have shifted in the sandy, sandy-loam soil. That’s the work we do. Motor, board, sensors, wiring, alignment, footings. Not just the obvious parts.

Why Miami Gate Company Is Tice’s Preferred Electric Gate Repair Company

Tice is unincorporated Lee County, which means different rules, different lot layouts, and different gate problems than you’d see inside Fort Myers city limits. We work those differences every week. Our Electric Gate Repair team handles acreage entrances, farm parcels, and light-commercial frontage along Palm Beach Boulevard, not just residential driveway gates.

Ruben Castellano leads our crew. He’s built the company around gate-only specialization, which means no split focus across fencing or garage doors. The diagnosis happens faster because gates are all we do. When a Tice property owner calls with a dead slide gate or a keypad that won’t take the code, the problem usually isn’t mysterious. It’s rust, or a failed solar charge controller, or a footing that let go after a wet season.

We carry parts for the brands Tice properties actually run: LiftMaster, FAAC, BFT, DoorKing, Linear, Ghost Controls, Mighty Mule, Elite, and Viking. If your operator isn’t on that list, we’ll still take a look. Brand-agnostic means we fix what you have.

Gate Access Control in Tice

Gate access control in Tice is what stands between Palm Beach Boulevard traffic and your driveway, pasture, or shop yard. On acreage properties around Tice, we’re usually retrofitting an older manual slide gate with a keypad, a radio receiver, or a full operator. On commercial frontage, it’s more likely a telephone-entry or card-reader system tied to a heavy slide or swing gate.

A basic single-family keypad retrofitted to an existing operator in Tice typically runs $350 to $650. A full access control package on a commercial gate – keypad, receiver, loop detector, and wiring cleanup – usually falls between $900 and $1,800 depending on gate width and how much of the old wiring has to come out. We quote the price before any work starts, and we don’t start until you’ve approved the number.

Solar-Ready Keypad and Entry Systems

Many Tice gates can’t draw grid power at the entrance, so the access control has to live on the same solar bank as the operator. We size keypads and receivers for low draw and wire them into the existing battery system rather than adding a second panel. That keeps entry working through stretches of cloudy summer afternoons, when cheap keypads tend to brown out.

Retrofitting Older Manual Gates

A surprising share of Tice driveway gates are still opened by hand. If the posts are solid and the gate rides true, we can mount an operator and add keypad entry without replacing the whole frame. If the posts have worked loose in the sand, we address the footings first. There’s no point bolting a motor to a post that moves.

Commercial Gate Operator in Tice

A commercial gate operator in Tice has to handle wide openings, frequent cycles, and weather that corrodes everything. We’re talking about farm entrances, equipment yards, warehouse frontage, and small business parcels along Palm Beach Boulevard. These aren’t ornamental gates. They’re working gates, often 16 to 24 feet wide, and they need operators built for continuous duty, not residential intermittent use.

Commercial operator replacement on a Tice property generally runs $2,200 to $4,800 installed, depending on gate weight, width, and whether we’re reusing the existing rack. A full new install on a prepared opening with access control typically starts around $4,500 and goes up from there. We don’t quote sight unseen. We come out, measure the gate, check the posts, and give you a written number.

Heavy-Duty Slide Gate Operators

Wide farm and yard gates in Tice are almost always slide gates, and slide gates are unforgiving when the track is off or the rack has jumped. We install operators rated beyond the gate’s actual weight, because on a hot August afternoon a 20-foot chain-link gate with a sagging hinge post puts more strain on the motor than the spec sheet suggests. We also re-align the rack before mounting the operator, so the new motor doesn’t inherit the old gate’s problems.

Loop Detectors and Vehicle Detection

Commercial gates in Tice need reliable vehicle detection, especially on frontage roads where a gate that closes on a truck is a liability. We install and tune loop detectors for slide and swing gates, and we wire safety photocells so the gate reverses cleanly on livestock-sized openings. Entrapment protection is code, not optional.

Trusted Brands We Service in Tice

We work on virtually any gate system – whatever brand you have, we know it. Around Tice, the doors we see most are LiftMaster and FAAC on residential acreage, DoorKing on commercial frontage, and Ghost Controls or Mighty Mule on mid-size farm gates. We keep boards, remotes, and safety sensors for those brands stocked locally, which means faster turnaround when a lightning strike takes out a control board or a keypad stops reading. If you’ve got an Elite or a Viking, we service those too.

Common Electric Gate Repair Problems We See in Tice Homes

• Solar battery and charge controller failure. Heavy summer rain and lightning surges stress the charge controller, and a battery bank that can’t hold a charge leaves the gate dead mid-driveway. We test the bank, replace failed cells, and often add surge protection so the next storm doesn’t do the same thing.
• Rack and pinion jumping on slide gates. Concrete post footings work loose in Tice’s sandy soil after a wet season, and the gate drops a fraction of an inch. That’s enough to throw the rack off the pinion. We reset the footing, re-align the rack, and tension the drive so the gate rides clean again.
• Rusted hinges and seized hardware. Humidity and rain rust the hinges, chains, and latch hardware on chain-link and welded-steel frames faster here than inland. We free up what’s salvageable and replace what’s not, usually with galvanized or stainless hardware that holds up longer.
• Older openers tripping on entrapment protection. When an older manual-turned gate gets a retrofit operator, aging photocells and corroded control boards often cause false trips or complete shutdowns. We re-aim sensors, clean connections, and replace boards when they’re beyond saving.

Pricing for Electric Gate Repair in Tice, FL

We Also Serve Cities Near Tice

Our Electric Gate Repair in Tice coverage extends throughout eastern Lee County. We regularly work in Lochmoor Waterway Estates, North Fort Myers, Buckingham, and Fort Myers Shores. If your property sits on the edge of Tice or just outside the ZIP code, call us anyway. We’re likely already working your road.

FAQs About Electric Gate Repair in Tice