Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Conway, FL
Gate installation in Conway, FL means working with mid-century to 1990s single-family homes on generous lake-adjacent lots, where driveway gates, side-yard gates, and pool-enclosure gates dominate the work. The subtropical heat, summer thunderstorms, and shifting sandy soil around Lake Conway create specific demands: wind-rated operators, rust-resistant hardware, and posts set deep enough to survive the rainy season. Miami Gate Company has served Conway since 2012, and we handle everything from first-time automatic gate installation to replacing a sagging manual gate. Call (833) 570-5807 for a free estimate.
Why Conway Homes Are Different
Conway sits on the south side of Orlando between Lake Conway and the airport corridor, a heavily residential pocket where most gate work happens on fenced suburban lots rather than commercial properties. The housing stock runs predominantly mid-century to 1990s single-family homes with block walls, chain-link, and wood privacy fencing, plus newer infill construction. That mix means we see a high volume of manual swing and sliding driveway gates, older wrought-iron that has lost its paint and begun to rust, and pool-enclosure gates that must satisfy Florida’s self-closing and self-latching safety code.
The climate does real work against gates here. Central Florida’s humidity accelerates rust on iron and steel. Heavy summer thunderstorms soften the sandy soil, which shifts and settles, especially on waterfront and canal-side lots. Posts heave, hinges pull loose, and gates that were perfectly aligned in April drag by September. Hurricane season adds another layer: operators and gate panels in Conway need to be selected with wind load in mind, particularly on larger driveway spans that catch a lot of surface area.
Styles & brands we work with
Our Main Conway Services
Most calls we take in Conway fall into two buckets: a gate that has stopped working correctly and needs repair, and an electric gate system where the automation has failed. Both are covered in depth on their own pages.
Gate Repair in Conway
Conway’s older gates fail in predictable ways: rusted hinges on mid-century wrought-iron, sagging wooden driveway gates after a wet summer, and latch posts that have drifted out of alignment as the sandy soil shifted. A manual gate that drags or won’t close properly is a security and safety issue on a lake-adjacent lot. We repair the gate itself, the hardware, and the alignment, and we quote the work before anything starts. For the full breakdown, see our Gate Repair in Conway page.
Electric Gate Repair in Conway
When an automatic gate in Conway stops responding, the cause is usually the motor, the control board, a loop detector, or a safety sensor, not the gate panel itself. Humidity and lightning from summer storms take a toll on control boards, and shifting posts can knock photo eyes out of alignment. We diagnose at the component level, not just the obvious parts. For a full look at how we handle automation failures, visit Electric Gate Repair in Conway.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Conway
Gate installation in Conway means matching the system to the property: a wind-rated sliding gate for a wide driveway on a canal-side lot, a compact swing gate for a side yard, or a self-closing pool gate that satisfies Florida code. The housing stock here favors established single-family homes where a properly installed gate has to survive heat, humidity, and soil movement. We install the gate, the operator, the power run, and the safety edges, and we handle the whole job as Gate Installation specialists, not fencing contractors. Whether you’re adding a gate to a new infill build or replacing a rusted manual gate, we quote the full price before any work begins.
Automatic Gate Installation
Signs you need it
You want keypad, remote, or phone-based entry on a driveway or side gate that currently requires getting out of the car.
What it costs in Conway
Automatic gate installation for a typical Conway driveway runs roughly $1,800 to $5,500, depending on operator type and gate length.
How we do it
We set or reinforce the posts, mount the operator, run the power and low-voltage wiring, install safety sensors and edges, and program remotes and keypads.
Driveway Gate Installation
Signs you need it
Your driveway is unfenced or has an aging manual gate that drags, rusts, or no longer closes securely.
What it costs in Conway
A new driveway gate in Conway typically costs between $2,000 and $7,500, with sliding gates on the higher end due to track and motor work.
How we do it
We measure the opening, build or hang the gate panel to fit the existing posts or set new ones, then finish with the operator if you’re going automatic.
Sliding Gate Installation
Signs you need it
Your driveway slopes or has limited swing clearance, so a sliding gate that tracks parallel to the fence line is the practical choice.
What it costs in Conway
Sliding gate installation in Conway generally falls between $2,500 and $8,000 because it includes the track, rollers, and often a heavier operator.
How we do it
We set the track and stops, hang the gate on rollers, install the motor and safety devices, and adjust travel and force settings for smooth operation.
What Gate Installation Costs in Conway
| Item | Typical range in Conway |
|---|---|
| Manual driveway gate (swing) | $1,000 – $3,500 |
| Automatic driveway gate with operator | $2,500 – $7,500 |
| Sliding gate with track and motor | $2,500 – $8,000 |
What kind of gate holds up best in Conway’s climate?
Powder-coated steel and aluminum hold up best against Conway’s humidity and summer rain. Wood gates need regular sealing or they warp within a few seasons. We’ll recommend materials based on your lot’s exposure and drainage, not a brand preference.
Do I need a permit to install a gate in Conway?
Most driveway gate installations in Conway don’t require a building permit, but pool-enclosure gates must meet Florida’s self-closing and self-latching code. If your HOA has architectural guidelines, we’ll work within them. We can confirm requirements for your specific property before work starts.
Brands We Service in Conway
We work on Ghost Controls, DoorKing, Elite, and Mighty Mule systems, among others. Our Conway trucks stock common boards, remotes, and safety sensors for these brands, so many repairs happen on the first visit. See our brands for the full list of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Conway, FL
| Service | Typical range in Conway |
|---|---|
| Gate repair (manual) | $150 – $650 |
| Electric gate repair | $200 – $800 |
| Operator replacement | $800 – $2,500 |
| Manual driveway gate (swing) | $1,000 – $3,500 |
| Automatic driveway gate with operator | $2,500 – $7,500 |
| Sliding gate with track and motor | $2,500 – $8,000 |
| Pool gate (self-closing) | $300 – $1,200 |
| Side-yard gate | $400 – $1,800 |
What pushes price up in Conway is soil work: waterfront and canal-side lots often need deeper post setting or additional concrete after the rainy season settles the ground. Wood gates that have warped from humidity typically need full panel replacement rather than hinge adjustment. Whatever the job, the price is quoted and agreed before any work starts.
Neighborhoods We Serve in Conway
We cover all of Conway’s 32812 ZIP code, from the lakefront streets near Lake Conway to the neighborhoods along Conway Road and Hoffner Avenue. Most calls get a response within the same week, with urgent repairs scheduled based on our route through the area.
- Lake Conway Shores
- Conway Acres
- Bryn Mawr
- Mariners Village
- Dover Shores
Service Area – Cities Near Conway
Beyond Conway, we regularly work in Azalea Park, FL, Belle Isle, FL, Edgewood, FL, and Pine Castle, FL. If your property is on the edge of Conway or just over the line into one of these areas, we can still help.
Serving Conway, FL — Our Local Coverage Area
We’re based in the Conway area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Conway
Most Conway calls are scheduled within a few days, and we prioritize emergency repairs where a gate won’t close or secure the property. If you’re on a lakefront lot with a gate that has dropped off its hinges, tell us when you call and we’ll work you in as fast as the schedule allows.
Some Conway neighborhoods have architectural guidelines that restrict gate height, material, or color. We’ve installed gates across enough Conway subdivisions to know which ones require approval, and we’ll help you navigate that before any materials are ordered. Pool gates always follow Florida safety code regardless of HOA rules.
Yes. Most of our Conway work is residential, but we also service commercial gate systems at small offices and multi-tenant properties along the Hoffner and Conway Road corridors. The same brand-agnostic diagnostic approach applies, whether it’s a driveway gate on a lakefront home or a commercial slide gate.
Call (833) 570-5807 for a free estimate on gate installation or repair in Conway, FL.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Conway Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Bethany Hayes"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Javier Mendoza"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Ramon Salazar