Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across West Palm Beach
Electric gate repair in West Palm Beach typically costs $180 – $650 depending on whether you’re dealing with a failed control board, a burned-out motor, or a corroded solar connection. Most repairs in this area take under two hours once we’re on site. The real challenge in West Palm Beach isn’t finding someone to look at your gate – it’s finding a specialist who understands why gates fail here differently than they do in Orlando or Fort Lauderdale.
We’re Miami Gate Company, and electric gates are all we do. Ruben Castellano leads our team, and we work across West Palm Beach from the historic neighborhoods near Flagler Drive out to the acreage communities west of 441. If your gate is stuck open, stuck shut, or making a grinding noise every time it cycles, call (833) 570-5807 for a free estimate. We diagnose the motor, board, sensors, and wiring – not just the obvious parts.
Why Miami Gate Company Is West Palm Beach’s Preferred Electric Gate Repair Company
West Palm Beach has a specific mix of gate problems you won’t find in most Florida cities. The 1920s homes in El Cid and Flamingo Park still have original wrought-iron gates with non-standard widths nobody manufactures replacement parts for anymore. The newer gated communities out west near 33411 and 33412 run on modern operators – LiftMaster, DoorKing, Elite – but those systems face their own set of failures from lightning strikes and humidity. We’ve worked on both ends of that spectrum, and everything in between.
What sets us apart is brand-agnostic diagnosis. We’re trained on nine major gate and operator brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means when we look at your system, we’re not steering you toward a replacement because that’s the only brand we sell. We fix what you have. If a Mighty Mule solar opener on a five-acre property in The Acreage has corroded battery connections, we repair the connections – we don’t try to sell you a whole new system.
Our Electric Gate Repair team covers every neighborhood in West Palm Beach, including 33411, 33412, 33413, and 33415. We know which streets flood during summer storms, which communities have HOA restrictions on gate hardware, and which older properties need custom fabrication instead of standard parts. That local knowledge shortens diagnosis time, which saves you money.
Styles & brands we work with





Automatic Gate Repair in West Palm Beach
Automatic Gate Repair in West Palm Beach usually means fixing a gate that opens fine one day and refuses to move the next. The most common culprits we find are failed control boards, burned limit switches, and water intrusion in the operator housing. In this climate, a heavy summer downpour can push moisture into the motor compartment and short out the circuit board overnight. A typical control board replacement here runs $280 – $500, while a full operator replacement usually lands between $850 and $1,800 depending on the brand and duty cycle.
Control Board and Limit Switch Failures
When the gate stops at random positions or doesn’t reverse when it hits an obstruction, the control board is usually the first thing we test. West Palm Beach’s high humidity accelerates corrosion on board contacts, especially in operators that sit in direct sun near the coast. We carry replacement boards for most of the major brands, so we don’t have to order and wait.
Storm-Damaged Operators
Hurricane season brings a specific repair pattern: wind-driven rain forces water past the operator seals, and the gate stops responding within a day or two. We see this constantly in neighborhoods like Northwood and South End. The fix often involves replacing the transformer, drying out the housing, and resealing the enclosure to keep the next storm out.
Electric Gate Motor in West Palm Beach
Electric Gate Motor problems in West Palm Beach usually show up as a gate that hums but doesn’t move, or one that moves a few inches and stops. The motor itself may have burned out, or the capacitor that gives it the starting torque may have failed. Motor replacement on a typical residential swing gate here runs $450 – $950 installed, while slide gate motors for wider openings usually land between $700 and $1,400.
Motor Capacitor and Gearbox Wear
We replace a lot of capacitors after summer afternoon thunderstorms. Lightning strikes nearby can spike the voltage and cook the capacitor even when the motor survives. If the motor runs but the gate barely moves, the gearbox may be stripped – common on older systems in historic districts where original gates have more mass than modern operators were designed to move.
Heavy-Duty Operators for Wide Gates
Out in the acreage areas west of Haverhill and around 33412, we install and repair heavy-duty slide gate operators built for wide farm entrances. These aren’t the same motors you’d use for a two-car driveway in Flamingo Park. They need higher duty cycles, stronger gearboxes, and often solar power when running conduit from the house would be impractical or too expensive.
Trusted Brands We Service in West Palm Beach
Gates are all we do – and that focus shows in the diagnosis. We service Ghost Controls, DoorKing, Elite, and Mighty Mule systems, along with LiftMaster, FAAC, BFT, Linear, and Viking. For West Palm Beach customers, that multi-brand coverage matters because many local gates were installed by builders who chose whatever brand was available at the time. You shouldn’t have to replace a working system just because one company only services one brand. We keep common parts stocked for DoorKing and LiftMaster systems, which are the two most common brands we see across West Palm Beach properties, so turnaround on repairs is faster than waiting on a distributor.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in West Palm Beach Homes
- Shifting post footings from expansive clay soils. The soil in much of western West Palm Beach swells when wet and shrinks when dry. Gate posts shift, the gate sags, and swing gates stop meeting in the middle or slide gates bind against the track.
- Salt air corrosion on coastal properties. Homes near the Intracoastal and Atlantic deal with salt-laden air that eats through gate hinges, motor housings, and electrical connections. Older wrought-iron gates in El Cid and along Flagler Drive are especially vulnerable.
- Water intrusion after heavy summer downpours. Subtropical rainfall pushes water into operator enclosures that weren’t sealed properly. We see corroded terminal blocks and rusted rack and pinion components on slide gates throughout 33413 and 33415.
- Solar opener failures on rural acreage entrances. Long driveways often rely on solar gate openers because running power from the house costs too much. Battery connections corrode, panels get knocked out of alignment by wind, and the gate stops working entirely – leaving livestock and vehicles trapped.
We recently repaired a wide farm gate in the Acreage area of West Palm Beach where the solar gate opener had failed due to corroded connections from hurricane-season rains. The gate was a heavy-duty slide gate with a LiftMaster operator, and the rack and pinion was misaligned after the ground swelled. We replaced the solar gate opener, realigned the rack and pinion, and added a safety photocell to meet UL 325, restoring reliable access for the homeowner’s livestock.
Pricing for Electric Gate Repair in West Palm Beach, FL
Here’s what you can expect to pay for common repairs in West Palm Beach:
- Keypad replacement or reprogramming: $120 – $280
- Remote control replacement or pairing: $85 – $220
- Safety photo eye or edge sensor replacement: $150 – $350
- Control board replacement: $280 – $500
- Gate motor replacement: $450 – $950 (residential swing)
- Slide gate motor replacement: $700 – $1,400
- Rack and pinion realignment or replacement: $200 – $600
- Solar panel battery replacement: $180 – $450
Every price is quoted and agreed before any work starts. We don’t hand you an invoice that’s bigger than the estimate. Call (833) 570-5807 for a free estimate and we’ll give you a firm number before we touch the gate.
We Also Serve Cities Near West Palm Beach
Our electric gate repair service covers the surrounding West Palm Beach metro, including West Gate, Haverhill, Lake Belvedere Estates, and Plantation Mobile Home Park. If you’re not sure whether we cover your property, call (833) 570-5807 and ask – if your gate is within our service area, we’ll get a technician scheduled.
Serving West Palm Beach, FL — Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in West Palm Beach
West Palm Beach’s subtropical rain pattern pushes water into operator enclosures through worn seals, corroding the control board and electrical connections. The fix is typically a board replacement plus resealing the housing. Call (833) 570-5807 and we’ll diagnose it before the next storm hits.
Yes. We repair solar gate openers regularly on the acreage properties west of 441 where long driveways make running grid power impractical. Common fixes include replacing corroded battery connections and realigning damaged panels. Call (833) 570-5807 for a free estimate on solar gate repair.
After heavy rain, the expansive clay soil under the posts swells and shifts, pulling the gate out of alignment so the latch misses. Debris from wind can also jam the track. We realign the gate, adjust the hinges, and often fabricate custom latch plates for older gates in historic neighborhoods like El Cid and Flamingo Park. Call (833) 570-5807 and we’ll get it latching again.
Yes, we work on heavy-duty slide gates and swing gates for farm and ranch entrances throughout the West Palm Beach area. These systems use higher-duty-cycle operators and often need custom fabrication for non-standard widths. Call (833) 570-5807 and tell us what you’re running – we’ll match the operator to the gate.
West Palm Beach gates need to meet Florida Building Code wind-load requirements and UL 325 entrapment protection standards, which means pressure edges or photo eyes and proper warning signage. We check all of that on every repair and installation. Call (833) 570-5807 and we’ll verify your system is code-compliant.
Written by Ruben Castellano, Owner at Miami Gate Company, serving West Palm Beach and surrounding communities.