Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in West Palm Beach, FL
Gate installation in West Palm Beach means building for hurricane wind loads, salt corrosion, and ground that shifts with the seasons. We install automatic driveway gates, sliding gates, and custom swing gates on properties from 1920s El Cid historic homes to newer gated communities out west. Every job starts with a free on-site measure and a written price before any work begins. Call (833) 570-5807 to schedule yours.
Why West Palm Beach Homes Are Different
Salt-laden air from the Intracoastal and Atlantic eats unprotected metal faster here than almost anywhere else in Florida. A powder-coated gate that lasts 15 years in Orlando might show rust blooms in 8 years in West Palm Beach, especially east of Dixie Highway. That changes what we install: marine-grade hardware, stainless fasteners, and finishes rated for coastal exposure.
The housing stock spans a century. In El Cid and Flamingo Park, we work around original 1920s wrought-iron gates and masonry columns that were never built for modern operators. Out west near the airport and in newer HOAs, gates are wider, heavier, and often paired with vehicle detection loops and telephone entry. Many older properties have non-standard gate openings, so custom fabrication is routine here, not an exception.
South Florida Building Code wind-load requirements apply to any gate installation or structural repair. Posts must be set deep enough and with enough concrete to handle hurricane gusts, and we size actuators to the gate’s actual weight and wind exposure. Expansive clay soils in parts of western West Palm Beach also shift posts seasonally, so we build footings with that movement in mind.
Styles & brands we work with
Our Main West Palm Beach Services
Most West Palm Beach calls start as one of two things: a gate that stops opening, or a motor that runs but the gate doesn’t move. These are the two services homeowners and property managers call about most.
Gate Repair in West Palm Beach
Gate repair here covers mechanical failures, sagging or misaligned leaves, rusted hinges, broken welds, and gate posts that have shifted in wet soil. On older West Palm Beach properties, original iron gates often need steel reinforcement rather than replacement, and we repair what’s there when it’s structurally sound. Salt corrosion accelerates hinge wear, so repairs frequently include upgraded stainless hardware. Learn more on our Gate Repair in West Palm Beach page.
Electric Gate Repair in West Palm Beach
Electric gates fail differently in a coastal climate. Control boards corrode from humidity, safety sensors drift after lightning storms, and wind-driven rain infiltrates operator housings. We diagnose the motor, control board, safety edges, photo eyes, and wiring, not just the symptom. For automatic gate issues, visit our Electric Gate Repair in West Palm Beach page for component-level details.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in West Palm Beach
Installing a gate in West Palm Beach starts with the site: what the ground does, what the wind code says, and what kind of gate the property actually needs. Whether it’s a new automatic driveway gate for a 1950s ranch in Flamingo Park or a sliding gate for a commercial lot off Belvedere Road, we measure the opening, check post footing conditions, and size everything to the wind zone before we ever order a part. For the full scope of what we build, see our Gate Installation service hub.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy gate by hand multiple times a day, or a previous manual gate is becoming a bottleneck for deliveries, guests, and family vehicles.
What it costs in West Palm Beach
Automatic gate installation in West Palm Beach typically runs $3,500 to $9,000, depending on gate size, operator type, and whether we’re adding access control like keypads or vehicle loops.
How we do it
We set engineered footings, hang the gate, mount the operator, wire the control board, install safety sensors, and program remotes and keypads before testing the full cycle.
Driveway Gate Installation
Signs you need it
You want to control vehicle access to the property, or an existing gate is too narrow, too low, or in poor enough condition that replacement makes more sense than continued repair.
What it costs in West Palm Beach
Driveway gate systems here cost between $2,800 and $8,000, with manual gates at the lower end and automated systems with access control at the upper end.
How we do it
We measure for correct width and swing clearance, choose a gate weight and style that matches your home or HOA, set posts in concrete sized for the soil, and hang and align the gate square.
Sliding Gate Installation
Signs you need it
The driveway slopes steeply, the gate opening is wide, or the property doesn’t have room for a swing gate to arc inward or outward.
What it costs in West Palm Beach
Sliding gate installation in West Palm Beach usually falls between $3,800 and $10,000, with the track, rollers, motor, and safety devices accounting for most of the variance.
How we do it
We pour a level concrete track base, set the guide posts, mount the gate on rollers, install the operator with a chain or rack drive, and add photo eyes and safety edges.
What Gate Installation Costs in West Palm Beach
| Item | Typical range in West Palm Beach |
|---|---|
| Manual driveway gate (single swing) | $1,500 – $3,500 |
| Automatic driveway gate with operator | $3,500 – $7,500 |
| Sliding gate system with automation | $4,000 – $10,000 |
Do I need a permit for a new gate in West Palm Beach?
Most automatic gate installations require a permit, and West Palm Beach enforces Florida Building Code wind-load standards on structural work. We handle the permit paperwork and schedule inspections as part of the job.
How long does gate installation take in West Palm Beach?
Most residential installations take one to three days from footing pour to final programming. Custom fabrication or HOA design review in West Palm Beach neighborhoods can add time before we start.
Brands We Service in West Palm Beach
We service and install operators from DoorKing, Elite, Ghost Controls, and Mighty Mule, and we keep common boards, remotes, and safety parts on hand for faster turnarounds in West Palm Beach. See our brands page for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in West Palm Beach, FL
| Service | Typical range in West Palm Beach |
|---|---|
| Gate repair (diagnostic and minor mechanical) | $120 – $350 |
| Gate hinge or weld repair | $200 – $600 |
| Gate post reset or reinforcement | $500 – $1,500 |
| Manual driveway gate installation | $1,500 – $3,500 |
| Automatic gate installation | $3,500 – $9,000 |
| Sliding gate installation | $3,800 – $10,000 |
| Electric gate control board replacement | $450 – $1,200 |
| Operator motor replacement | $600 – $1,800 |
| Safety sensor or photo eye replacement | $250 – $600 |
| Gate remote or keypad programming | $90 – $250 |
In West Palm Beach, prices push upward when a gate is custom-sized, when the operator has to meet strict HOA design requirements, or when coastal corrosion means hardware needs to be upgraded rather than patched. Every quote is written and approved before we start, so the final invoice matches the price you saw upfront.
Neighborhoods We Serve in West Palm Beach
We work across West Palm Beach, from the historic streets of El Cid and Flamingo Park to the subdivisions west of I-95. Most calls in the city get a response within one business day.
- El Cid
- Flamingo Park
- Northwood
- South End
- West Palm Beach gated communities west of I-95
Service Area – Cities Near West Palm Beach
Our West Palm Beach crews also cover nearby communities in central Palm Beach County. We regularly work in West Gate, FL, Haverhill, FL, Lake Belvedere Estates, FL, and Plantation Mobile Home Park, FL for both repairs and installations.
Serving West Palm Beach, FL — Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in West Palm Beach
Most West Palm Beach repair calls are scheduled within one business day, and we prioritize gates that won’t close or latch, since an open gate is a security and liability problem. Call (833) 570-5807 and we’ll get you on the schedule.
Yes. Many West Palm Beach communities have design standards for gates, especially gated neighborhoods and historic districts. We coordinate with the HOA or board on specs, finishes, and timelines before work starts.
We do. From single-family driveway gates in El Cid to commercial sliding gates and access control on Belvedere Road corridor properties, the same team handles diagnosis, installation, and replacement across both segments.
If your gate needs work in West Palm Beach, call (833) 570-5807 for a free estimate. We’ll measure, diagnose, and give you a written price before anything is ordered or installed.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What West Palm Beach Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Ryan Miller"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Arjun Sharma"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Chris Norris