Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across North Lauderdale
If your electric gate in North Lauderdale has stopped opening, is grinding when it moves, or simply won’t respond to the remote, you’re dealing with a problem that won’t fix itself. Miami Gate Company handles electric gate repair across the 33068 ZIP every week, diagnosing motors, control boards, safety sensors, and wiring on virtually any system you own. We work on LiftMaster, FAAC, BFT, DoorKing, Mighty Mule, and more, and we’ll quote the repair before any work begins. Call (833) 570-5807 for a free estimate, or keep reading to understand what’s likely wrong with your gate and what it costs to fix in North Lauderdale.
Why Miami Gate Company Is North Lauderdale’s Preferred Electric Gate Repair Company
North Lauderdale’s housing stock is dominated by single-family homes and small multifamily complexes built in the 1960s and 1970s, many with original concrete driveways and steel gates now reaching the end of their service life. We know these neighborhoods. The gates off SW 81st Avenue, the swing arms in the older sections near Hampton Hills, and the slide gates along Rock Island Road have all crossed our work orders. That local experience matters because a gate built for a 1972 rancher has different failure points than one installed on a newer home, and diagnosing it correctly the first time is the difference between a $300 repair and a $2,000 replacement.
Ruben Castellano leads our repair team, and he’s spent years working on gates in North Lauderdale’s specific conditions. We are not a fencing company that also does gates, and we’re not tied to a single manufacturer. We service nine major gate and operator brands, which means the recommendation you get is based on what your system actually needs, not on what we happen to sell. If your existing operator can be saved, we fix it. If the board is fried beyond repair, we’ll tell you exactly why and show you the part before ordering anything.
Styles & brands we work with





Automatic Gate Repair in North Lauderdale
Automatic Gate Repair in North Lauderdale typically runs between $180 and $650 depending on whether we’re replacing a control board, rewiring a motor, or replacing a failed safety sensor. Most repairs are completed in a single visit, and the price is quoted and agreed before any work starts, so there’s no invoice surprise at the end. We handle the full electrical side of the gate: the operator logic, the limit switches, the keypad wiring, and the safety photocells that keep the gate from closing on a car or a person.
Component-Level Diagnosis
Most handymen stop at the obvious part. We don’t. When a gate opener in North Lauderdale won’t respond, our technicians test the motor, the control board, the transformer, and the wiring harness separately to isolate the actual fault. That’s how we catch things like a corroded relay on an otherwise healthy board, a repair that costs a fraction of a full replacement.
Upgrades to Storm-Resistant Parts
Given North Lauderdale’s summer storm patterns, we often recommend surge protectors and stainless steel fixings when we repair an operator on the west side of town. Those gates take the brunt of afternoon thunderstorms, and a standard repair without surge protection can fail again within months.
Electric Gate Motor in North Lauderdale
An Electric Gate Motor repair in North Lauderdale usually costs between $350 and $900 when the motor itself has failed, though many “motor” problems turn out to be a bad capacitor, a misaligned rack, or a dead control board, which are cheaper to fix. We bench-test motors before replacing them, because a motor that isn’t turning often just isn’t getting power, and putting in a new motor won’t solve a bad relay. The quote covers everything: the part, the labor, and the final adjustment so the gate opens and closes at the right speed and force.
Motor Noise and Strain
In North Lauderdale’s older subdivisions, we regularly see gate motors burning out because the gate itself has sagged from corroded hinge posts. The motor works harder to move a gate that’s dragging, and over time that strain kills the gears. We address the mechanical alignment alongside the motor, not just the electrical side.
What Lasts on the Coast
For homes in the 33068 ZIP, we recommend motors with sealed housings and circuit boards with conformal coating to resist the humidity and salt that shorten component life. It’s a small upgrade in cost for a significantly longer service life, which matters when you’re replacing a gate motor in this climate every five to seven years instead of every ten to twelve.
Trusted Brands We Service in North Lauderdale
Our Electric Gate Repair team works on DoorKing, Elite, Mighty Mule, Ghost Controls, LiftMaster, FAAC, BFT, Linear, and Viking systems, so chances are we already know your operator’s failure points before we even arrive. For North Lauderdale customers, we keep common boards, limit switches, and safety sensor parts stocked locally, which shortens the wait time when your gate is down. That’s the benefit of working with a brand-agnostic gate specialist instead of a single-brand dealer, and it’s why so many property owners in North Lauderdale call us when other companies tell them they need a full replacement. If we can repair what you have, we’ll tell you.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in North Lauderdale Homes
- Fried control boards after west-facing storms. North Lauderdale’s afternoon thunderstorms roll in from the west, and gates facing that direction get hit with power surges and water intrusion through corroded keypads. The control board is usually the first casualty, and it’s the most common repair we do in the 33068 ZIP.
- Rusted hinge posts causing sag and misalignment. The salt-laden Atlantic air accelerates corrosion on older steel gate posts, especially painted steel installed in the 1960s and 70s. Once a post rusts at the base, the gate sags, the rack and pinion misalign, and the motor strains. We cut out and replace the post, then reinforce with stainless fasteners.
- Water intrusion through corroded keypad entry systems. Gate keypads in North Lauderdale sit exposed to salt air and heavy rain, and the rubber seals around the buttons dry out and crack within a few years. Water gets inside, shorts the keypad, and sometimes takes the operator board with it. We replace the keypad with a sealed unit and stainless hardware.
- Safety sensor faults from salt corrosion on photocell housings. The photocells that keep your gate from closing on a vehicle or person have metal brackets that corrode quickly in this climate. Once the bracket shifts or the lens fogs with salt residue, the gate starts reversing for no reason. We clean, recalibrate, or replace the sensors as needed.
Pricing for Electric Gate Repair in North Lauderdale, FL
Electric gate repair in North Lauderdale typically falls into these ranges: keypad replacement $120 – $280, safety sensor repair $150 – $350, control board replacement $250 – $650, and full gate motor replacement $350 – $900. The biggest cost driver is whether we’re repairing a component or replacing it entirely, and whether your gate needs mechanical realignment alongside the electrical work. We don’t charge for the diagnosis on a booked repair, and the final price is written down and agreed before any work starts. Call (833) 570-5807 to describe what your gate is doing, and we’ll give you an honest range over the phone.
We Also Serve Cities Near North Lauderdale
Beyond North Lauderdale, our electric gate repair service covers Palm Aire, Margate, Tamarac, and Coconut Creek. If your property sits near the border or in an HOA community spanning multiple ZIP codes, we’ll still come out. The salt air and storm patterns affect all of these cities similarly, and we’re familiar with the gate systems installed throughout the area.
Serving North Lauderdale, FL — Our Local Coverage Area
We’re based in the North Lauderdale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in North Lauderdale
Electric gate operators in North Lauderdale fail after summer storms because power surges and water intrusion hit the control boards, especially on west-facing gates in the 1960s – 70s subdivisions where the electrical infrastructure is older. The gate operator’s control board is the most surge-sensitive component, and a direct hit on a nearby power line can travel into your gate’s transformer and board. We see a spike in calls after every major thunderstorm, and the fix is usually a board replacement plus a surge protector. Call (833) 570-5807 if your gate died after the last storm.
Stainless steel hardware and galvanized or aluminum gates last longest in North Lauderdale’s salt air. Painted steel and zinc-plated fasteners are the first to fail, especially at weld points and the base of hinge posts where water pools. We recommend stainless fixings on keypads, photocell brackets, and hinge bolts, and if you’re replacing a gate, a galvanized steel frame or aluminum construction will outlast painted steel by years. The upfront cost is higher, but you’re not paying for a new gate every eight years.
Look for rust staining at the base of the post, flaking paint, or a visible lean when the gate is open. Tap the post with a wrench, and if it sounds hollow or crumbles at the rust line, the structural steel is compromised well before the gate starts sagging. In North Lauderdale’s salt air, a painted steel hinge post can look fine from a distance while the inside has corroded to half its original thickness, and that’s the failure point we most commonly find on gates built in the 1970s.
Yes, automatic gates in North Lauderdale are required to have entrapment protection that meets UL 325, which means safety photocells, obstruction sensors, or contact edges that stop and reverse the gate when something is in its path. If your gate was installed before these standards became mandatory, it may not be compliant, and that’s a liability for both homeowners and HOAs. We can assess your existing system and add the appropriate safety devices. Call (833) 570-5807 if you’re not sure whether your gate meets the current code.
Yes, we repair gate operators from LiftMaster, FAAC, DoorKing, and the other major brands, including LiftMaster repair in North Lauderdale, and we stock common replacement parts locally for North Lauderdale customers. Most gate problems are brand-agnostic at the component level: a failed limit switch or a dead capacitor behaves the same way across manufacturers. Being brand-agnostic means we fix what you have, and we don’t push a replacement just because we have an incentive with a particular manufacturer. Tell us the brand and the symptom, and we’ll bring the right parts on the first trip.
If your gate is down or acting erratically, call Miami Gate Company at (833) 570-5807 now. We’ll diagnose the problem, give you a written quote before any work starts, and get your gate running again without pushing a replacement you don’t need. Serving all of Electric Gate Repair in North Lauderdale and the surrounding communities from Palm Aire to Coconut Creek.
Written by Ruben Castellano, Owner at Miami Gate Company, serving North Lauderdale and South Florida’s gate repair needs.