Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in North Lauderdale, FL
Gate installation in North Lauderdale comes down to two things: a housing stock built in the 1960s and 1970s with original concrete driveways now reaching end of life, and a subtropical climate that punishes undersized hardware. Miami Gate Company handles the full scope, from replacing a rusted swing gate on a 300-foot lot to automating a sliding gate on a small multifamily complex. We’re a gate specialist, not a generalist, and the difference shows in how fast we diagnose what your property actually needs. Call (833) 570-5807 for a free estimate.
Why North Lauderdale Homes Are Different
North Lauderdale’s 33068 ZIP is a 1960s-to-1970s suburban build-out. Drive through any of the older subdivisions off SW 81st Avenue or along Kimberly Boulevard and you’ll see the pattern: single-family homes and small multifamily properties, many still running the original concrete driveways and metal gates installed when the house was built. Those gates are now fifty-plus years old. The steel is fatigued. The hinges are worn thin. The operator, if there ever was one, is long obsolete.
The climate makes it worse. Salt-laden Atlantic air works on metal year-round, even ten miles inland. Summer monsoon storms dump rain that finds its way into control boards and keypads. South Florida doesn’t have a gate repair “season” here. It’s a block-by-block, month-by-month reality. After every summer thunderstorm, we see a spike in calls from the older subdivisions, especially gates that face west and take the full brunt of afternoon storms. Power surges and water intrusion kill control boards faster than anything else we see.
Styles & brands we work with
Our Main North Lauderdale Services
Most North Lauderdale homeowners call us for one of two reasons: a gate that won’t open, or an electric gate that’s behaving erratically. Here’s what each involves locally.
Gate Repair in North Lauderdale
Older gates in North Lauderdale fail in predictable ways: rusted hinge welds, sagging leaves that drag on concrete, cracked posts from decades of wind loading, and latches that no longer align. On swing gates, the bottom hinge takes the most abuse. On sliding gates, it’s usually the roller trucks and guide wheels. We repair the gate itself: cut out rusted sections, re-square the frame, replace hinge hardware, and adjust alignment so the leaves close cleanly. If your gate is hard to move by hand or drags across the driveway, that’s a structural issue, not a convenience one. Read more about Gate Repair in North Lauderdale.
Electric Gate Repair in North Lauderdale
When an automated gate stops responding, the problem is almost always in one of four places: the motor, the control board, a safety sensor, or the wiring between them. In North Lauderdale, we see a disproportionate number of control board failures after thunderstorms. Water finds its way into the housing, or a surge takes out the board’s transformer. We diagnose at the component level. We don’t just replace parts until something works. We test the motor’s amp draw, check the board’s outputs, verify the photo eyes are aligned and clean, and trace wiring for corrosion. That’s the difference between fixing it once and coming back twice. Learn more about Electric Gate Repair in North Lauderdale.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in North Lauderdale
New gate installation in North Lauderdale usually means replacing hardware that was installed when the neighborhood was built. The original gates are tired, the driveway aprons are settled, and many homeowners want automation for the first time. We handle the full job: demo of the old gate, site prep, post setting, gate fabrication or assembly, operator mounting, and final safety checks. Whether you’re replacing a rusted swing gate on a single-family home or adding a sliding gate to a small complex, the work starts with a free site measure and a written quote. Our Gate Installation service covers residential and commercial properties across the 33068 ZIP.
Automatic Gate Installation
Signs you need it
You’re getting out of the car every time you come home to open a manual gate, or you’ve added security concerns that a keyed latch can’t solve.
What it costs in North Lauderdale
Automatic gate installation in North Lauderdale typically runs $1,800 to $6,500, depending on operator brand, gate weight, and whether we’re running new power to the post.
How we do it
We confirm gate dimensions and weight, pour or reinforce the operator pad, mount the arm or ram, run and seal all low-voltage wiring, program remotes and keypads, and set force and obstruction sensitivity before we leave.
Driveway Gate Installation
Signs you need it
Your current driveway gate sags, drags, or no longer closes flush, and the frame has visible rust-through at the hinge points.
What it costs in North Lauderdale
A new driveway gate in North Lauderdale generally falls between $1,500 and $4,200 for the gate itself, with automation adding $1,000 to $3,500 depending on the operator.
How we do it
We measure the actual driveway opening rather than trusting the old gate’s dimensions, cut back settled concrete where needed, set new posts in concrete, hang and square the gate, and adjust for the driveway’s slope.
Sliding Gate Installation
Signs you need it
Your property has a wide driveway or limited swing clearance, and a swing gate either won’t fit or already scrapes on uneven concrete.
What it costs in North Lauderdale
Sliding gate installation in North Lauderdale typically starts around $2,500 and runs up to $7,000 for larger commercial-width gates with automated operators.
How we do it
We set a reinforced steel track on a poured concrete base, install the roller trucks and cantilever or V-track system as needed, mount the operator with a properly racked chain or belt, and tune the limit switches so the gate stops exactly where it should.
What Gate Installation Costs in North Lauderdale
| Item | Typical range in North Lauderdale |
|---|---|
| Manual driveway gate (single swing) | $1,500 – $3,200 |
| Automated swing gate system | $2,800 – $6,500 |
| Sliding gate with operator | $2,500 – $7,000 |
Do you handle the power run and safety edges when installing a gate in North Lauderdale?
Yes. We run conduit and low-voltage wiring from the panel or nearest power source, install photo eyes and safety edges where required, and verify obstruction reversal works before we call the job done. Call (833) 570-5807 for a site-specific quote.
How long does a gate installation take in North Lauderdale?
Most single-family gate installations are completed in one day once materials arrive. Custom or commercial sliding gates can take two to three days depending on concrete curing time and fabrication. We give you a written timeline with the quote.
Brands We Service in North Lauderdale
We work on virtually any gate system in North Lauderdale, with deep bench strength on DoorKing, Elite, Ghost Controls, and Mighty Mule, among others. Because we’re brand-agnostic, our technicians stock common control boards, remotes, and safety parts for these systems on the truck. That means fewer return trips. See our brands for the full list of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in North Lauderdale, FL
| Service | Typical range in North Lauderdale |
|---|---|
| Gate repair (labor and standard hardware) | $150 – $650 |
| Electric gate diagnostic call | $90 – $180 |
| Control board replacement | $350 – $1,200 |
| Gate operator replacement (motor only) | $700 – $2,500 |
| Swing gate hinge replacement (pair) | $180 – $450 |
| Sliding gate roller truck replacement | $220 – $550 |
| Keypad or receiver replacement | $150 – $400 |
| Manual driveway gate (new, single swing) | $1,500 – $3,200 |
| Automated swing gate system (installed) | $2,800 – $6,500 |
| Sliding gate with operator (installed) | $2,500 – $7,000 |
In North Lauderdale, two things push gate pricing up: the age of the original concrete and the salt exposure. If a driveway apron has settled or cracked, we may need to saw-cut and re-pour the post footing before hanging a new gate. Coastal air also means we recommend marine-grade steel or aluminum for any new install within a few miles of the ocean influence. Every quote is agreed before any work starts, in writing, with no surprises on the invoice.
Neighborhoods We Serve in North Lauderdale
We cover the full 33068 ZIP, and our technicians are on the road in North Lauderdale most days of the week. Typical response for repair calls in the area is 24 to 48 hours, often faster when the gate is stuck open or locked shut.
- Highland Park
- Boulevard Woods
- Somerset
- North Lauderdale Estates
- Century Village area
Service Area – Cities Near North Lauderdale
Miami Gate Company serves North Lauderdale and the surrounding Broward communities. If you’re in Palm Aire, FL, Margate, FL, Tamarac, FL, or Coconut Creek, FL, the same brand-agnostic gate repair and installation service applies. Call and ask which days we’re working in your neighborhood.
Serving North Lauderdale, FL — Our Local Coverage Area
We’re based in the North Lauderdale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in North Lauderdale
For a gate that’s stuck open or won’t close and secure, we prioritize North Lauderdale calls and can usually have a technician out within 24 hours, sometimes same day. For non-urgent installations, we schedule a free measure first and give you a written timeline. Call (833) 570-5807 and describe what the gate is doing.
Many North Lauderdale subdivisions have HOA rules about gate style, height, and color, and Broward County may require a permit for powered gates. We can tell you what to ask your HOA when you call, and we install to code once approvals are in hand. The process is usually straightforward, but it’s worth confirming before demo day.
Yes. We cover all of North Lauderdale’s 33068 ZIP, including single-family homes, duplexes, and small multifamily properties. If you’re not sure whether you’re in our service area, call (833) 570-5807 and we’ll confirm by address in under a minute.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What North Lauderdale Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Alma Vargas"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Bethany Hayes"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Javier Mendoza