Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Sewall’s Point, FL
Gate installation in Sewall’s Point almost always means a custom driveway entry on a waterfront estate or a gated dock access point facing the St. Lucie River. The salt air, hurricane-season storm surge, and the low-density layout of the peninsula change how gates are specified, mounted, and powered here compared to inland Martin County. Miami Gate Company has served Sewall’s Point since 2012, handling everything from first-time automatic gate installation to repairs on gates that have spent two decades in direct salt exposure. Call (833) 570-5807 for a free estimate.
Why Sewall’s Point Homes Are Different
Sewall’s Point is a low-density residential peninsula where nearly every property sits on a generous estate lot with private drives off Sewall’s Point Road or Indian River Drive. The housing stock splits between large custom-built estates and older waterfront ranch homes, and the entries reflect that: elaborate masonry pillars, wrought-iron gates, coral-rock columns, and crushed-shell or paver driveways. Gates here are typically owner-built or custom-installed rather than pulled from a tract-builder catalog.
That changes the work. A standard swing gate on a mainland HOA community might be a bolt-in aluminum panel. On Sewall’s Point, we more often see heavy custom steel or wrought-iron gates hung on masonry pillars that were built decades ago, with operators retrofitted later. The salt exposure from the Indian River and St. Lucie River is relentless. Steel hinges and operator housings corrode far faster than they do even a few miles inland, and after a named storm we regularly find slide gates jammed with windblown sand and shell grit. Battery-backup and manual-release repairs are routine here in a way they aren’t in other parts of Martin County.
Styles & brands we work with
Our Main Sewall’s Point Services
When Sewall’s Point homeowners call us, it’s usually for one of two reasons: a gate that has stopped moving entirely, or an electric operator that’s behaving erratically. Here’s what each involves on the peninsula.
Gate Repair in Sewall’s Point
Most gate repair calls in Sewall’s Point involve hinges, posts, or the gate frame itself rather than the motor. Salt corrosion attacks the pivot points first, and on river-side properties we frequently find hinge bolts seized or snapped while the operator still works fine. Wind-driven rain and storm surge also take a toll on gate alignment, especially on older masonry pillars that have settled over the years. We repair, reinforce, and realign gates in place, and when a hinge or post is beyond saving, we fabricate a replacement that matches the existing ironwork. Learn more on our Gate Repair in Sewall’s Point page.
Electric Gate Repair in Sewall’s Point
Electric gate repair on Sewall’s Point is a component-level job. We diagnose the motor, the control board, the safety sensors, the wiring, and the remote receivers, then replace or repair only what’s actually failed. Salt spray works its way into operator housings and corrodes terminals and boards long before the motor itself gives out, so we carry replacement boards, sensors, and receivers for the major brands on the truck. After a storm, we’re often the first call for stranded slide operators and dead battery backups. Details are on our Electric Gate Repair in Sewall’s Point page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Sewall’s Point
Gate installation in Sewall’s Point is rarely a one-size-fits-all job. The housing stock is custom, the lots are large, and the salt air means materials and hardware choices matter more than they do inland. We specify and install gates and operators that can handle direct river frontage, post-storm power interruptions, and the weight of custom ironwork. As a full Gate Installation specialist, we handle everything from the driveway entry to the dock access gate, including the civil work, the operator, the safety edges, and the programming.
Automatic Gate Installation
Signs you need it
You’re manually opening and closing a heavy gate every time you come and go, or you have an older operator that’s failed and isn’t worth repairing.
What it costs in Sewall’s Point
Automatic gate installation on a standard driveway entry in Sewall’s Point typically runs $2,200 to $7,900 installed, depending on gate size, weight, power availability, and the operator’s duty cycle.
How we do it
We measure the gate and the opening, pull the power run, set the operator and mounting hardware, install safety sensors and edges, wire the control board, and program remotes and keypads in a single visit.
Driveway Gate Installation
Signs you need it
You have a new build or a major entry renovation and want a driveway gate designed for the lot, the setback, and the river-front conditions.
What it costs in Sewall’s Point
Driveway gate installation on Sewall’s Point usually falls between $2,200 and $6,800, with custom ironwork and masonry-pillar retrofits pushing the upper end of that range.
How we do it
We survey the driveway geometry and pillar condition, fabricate or source the gate to match the existing entry, then install the gate, hinges, operator, safety system, and access controls as one coordinated job.
Sliding Gate Installation
Signs you need it
Your driveway slopes or curves near the road, your setback is too tight for a swing gate, or you’re replacing an older slider that has been jamming since the last storm.
What it costs in Sewall’s Point
Sliding gate installation in Sewall’s Point typically costs $3,700 to $11,200, with the higher end covering heavy custom sliders, long track runs, and operators rated for continuous salt exposure.
How we do it
We set the track and foundation, hang the gate, install the roller carriages and guides, mount the operator, wire the safety eyes and edge sensors, and run full travel tests before we leave.
What Gate Installation Costs in Sewall’s Point
| Item | Typical range in Sewall’s Point |
|---|---|
| Automatic gate installation | $2,200 – $7,900 |
| Driveway gate installation | $2,200 – $6,800 |
| Sliding gate installation | $3,700 – $11,200 |
Do you handle the power run and safety edges on a new gate installation?
Yes. We run the electrical service to the operator, install the required safety edges and photo eyes, and handle the wiring and programming as part of every automatic gate installation in Sewall’s Point. Call (833) 570-5807 for an exact quote.
How long does a full gate installation take in Sewall’s Point?
Most driveway gate installations in Sewall’s Point are completed in one to two days on site, with custom fabrication or masonry work adding lead time. We’ll give you a written schedule before we start so you know exactly when the gate will be operational.
Brands We Service in Sewall’s Point
We work on virtually any gate system you’re likely to own on the peninsula, including DoorKing, Mighty Mule, Ghost Controls, and Elite. Our trucks carry common boards, sensors, receivers, and remotes for these and several other brands, which keeps most Sewall’s Point repairs to a single visit. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Sewall’s Point, FL
| Service | Typical range in Sewall’s Point |
|---|---|
| Automatic gate installation | $2,200 – $7,900 |
| Driveway gate installation | $2,200 – $6,800 |
| Sliding gate installation | $3,700 – $11,200 |
| Gate opener replacement | $620 – $1,400 |
| Electric gate opener repair | $150 – $450 |
| Gate track repair | $220 – $750 |
| Swing gate hinge replacement | $95 – $300 per hinge |
| Keypad replacement | $140 – $285 |
| Control board replacement | $210 – $790 |
| Loop detector replacement | $180 – $350 |
What pushes pricing up in Sewall’s Point is usually salt exposure and storm history. A gate that has spent a decade in direct river-front air will often need hinge, housing, and wiring remediation at the same time as the primary repair, and we’ll quote that as one clear number before any work starts. You’ll always know the price before we begin, and we don’t change it mid-job unless you approve a scope change in writing.
Neighborhoods We Serve in Sewall’s Point
We cover the entire Sewall’s Point peninsula, ZIP code 34996, including the larger estate parcels along Sewall’s Point Road, the river-front lots on Indian River Drive, and the interior streets with older ranch homes on generous lots. Most repair calls on the island-style peninsula are reached within a short drive, and we schedule installation work around the town’s quiet residential character.
- Indian River Drive river-front estates
- Sewall’s Point Road corridor
- St. Lucie River side dock-access properties
- Interior estate streets and private drives
Service Area – Cities Near Sewall’s Point
Miami Gate Company serves Sewall’s Point and the surrounding Martin County communities. We work regularly in Stuart, FL, North River Shores, FL, Jensen Beach, FL, and Hutchinson Island South, FL. If you’re on the peninsula or just across the bridge, we’ll make the drive and bring the parts we expect to need.
Serving Sewall’s Point, FL — Our Local Coverage Area
We’re based in the Sewall’s Point area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sewall’s Point
Sewall’s Point is a small residential town with strict scrutiny on anything visible from the road or the water. We’ll flag anything on your project that likely needs town review before work starts, and we can coordinate with the town on your behalf for installation projects. Repairs of an existing gate typically don’t require any approval.
Yes, and those are the majority of our Sewall’s Point jobs. River-front gates get more salt spray and storm-driven debris than anything a few blocks inland, so we specify corrosion-resistant hardware and marine-grade components where they’re most exposed. We’ll detail that in your quote so you can see exactly what’s being used and why.
For a gate that won’t open or won’t close securely, we prioritize Sewall’s Point calls and can typically have a technician on the peninsula the same day you call. Call (833) 570-5807 and describe what the gate is doing. If it’s a safety issue or the gate is stuck closed and you can’t get a car out, tell the dispatcher and we’ll move it to the top of the route.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sewall's Point Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Chris Norris"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Alma Vargas"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Bethany Hayes