Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Sewall’s Point
When a driveway gate stops opening on Sewall’s Point Road or a dock gate seizes up on Indian River Drive, you need a technician who understands what salt air and hurricane season do to gate hardware. That’s us. Miami Gate Company repairs electric and manual gates throughout Sewall’s Point, FL 34996, from swing gates on estate entries to slide gates on crushed-shell driveways. We answer at (833) 570-5807, and we quote every job before work begins. Gates are all we do, so diagnosis on a LiftMaster or DoorKing operator doesn’t take half a day.
This page covers what Sewall’s Point homeowners actually deal with: salt corrosion, storm grit, architectural approval, and custom gate repairs most contractors won’t touch.
Why Miami Gate Company Is Sewall’s Point’s Preferred Gate Repair Company
Sewall’s Point is a residential peninsula, not a commercial corridor. That changes the work. Nearly every gate here is owner-built or custom-installed on a private estate lot. A mainland fencing company used to parking-lot arms won’t recognize the failure pattern on a riverfront swing gate off Indian River Drive. We do, because we see it weekly.
Ruben Castellano leads our team, and he trains technicians specifically on salt-exposed gate systems. That’s the difference in Sewall’s Point: we know the hinge corrodes before the motor quits. We know post-storm calls spike with sand-jammed sliders. We stock replacement parts for Ghost Controls, Elite, Mighty Mule, and DoorKing units so a repair isn’t delayed waiting on a warehouse shipment from Orlando.
Homeowners in Sewall’s Point call us because the first phone call gets a straight answer, not a sales pitch. We service the gate you already own. If a control board is repairable, we repair it. If a hinge replacement makes more sense than a full gate rebuild, that’s what we recommend.
Styles & brands we work with
Driveway Gate Repair in Sewall’s Point
Driveway Gate Repair in Sewall’s Point usually means a swing gate on a paver or shell driveway that has sagged, slowed, or stopped entirely. The salt air along the St. Lucie and Indian River accelerates hinge wear faster than anywhere inland in Martin County. A gate that worked fine in January can bind by August because the hinge post has shifted in sandy soil and the hardware is scaling with rust. We realign the gate, replace corroded hinges and post brackets, and re-secure the operator so the motor isn’t fighting the gate’s own weight.
Salt-Binding Swing Gates
River-side properties get the worst of it. Salt spray works into hinge pins and bearing surfaces, and within a couple of seasons the gate moves in a jerky arc or struggles to close fully. Our crew removes the gate leaf, checks the post footing, replaces the hinge hardware with corrosion-resistant stock, and resets the operator limits. This typically runs $425 to $900 on a standard estate swing gate in Sewall’s Point.
Slide Gate Track and Roller Repair
Slide gates on wider lots suffer a different problem: windblown sand and shell grit collect in the track. After a named storm, that grit packs into the rollers and the gate stalls mid-travel. We clean and flush the track, replace worn rollers, and inspect the rack and pinion for embedded shell fragments. Expect $350 to $800 depending on track length and damage.
Gate Welding in Sewall’s Point
Gate Welding in Sewall’s Point is mostly repair work on wrought-iron and steel gates that have rusted through at the bottom rail, hinge stile, or decorative scrollwork. The combination of river humidity and salt exposure means a steel gate on a waterfront estate can develop structural rust in five years. We weld new steel into the failed sections, grind and dress the repair, and apply a salt-rated primer and finish. For a typical repair on a custom estate gate, count on $350 to $1,100 depending on the extent of the corrosion and the amount of decorative work that needs rebuilding.
Hinge Stile and Post Repair
When the hinge stile rots through, the gate drops out of alignment and the operator starts slamming against the travel stops. We cut out the failed steel, weld in a new stile section, and re-hang the gate so it swings true. This job often pairs with hinge replacement, so we bundle the work and quote it as one repair.
Decorative Iron Restoration
Custom gates on Sewall’s Point estates often have scrollwork, finials, or coral-rock pillar anchors that aren’t made anymore. We’re comfortable fabricating replacement scrolls and repairing lattice work to match the original. It’s slower than bolt-on repair, but it’s the only way to keep an owner-built gate looking like it belongs on the property.
Trusted Brands We Service in Sewall’s Point
We see a lot of LiftMaster and DoorKing operators on Sewall’s Point estates, along with Mighty Mule and Ghost Controls units on lighter driveway gates and dock access points. Elite and FAAC show up on the larger custom installs. Because we’re brand-agnostic, we diagnose what’s actually on your property and repair it. We keep common control boards, remote transmitters, and safety sensors in local stock for faster turnaround in Sewall’s Point. No waiting on a dealer to ship parts.
Common Gate Repair Problems We See in Sewall’s Point Homes
- Salt-corroded hinges and operator housings. The hardware fails before the motor does. A gate that won’t close often has a seized hinge, not a dead board.
- Storm grit in slide gate tracks. After heavy wind, shell fragments and sand pack into rollers and the gate stalls halfway. The keypad works fine; the gate physically can’t move.
- Power surges after storms. Lightning and surge events take out control boards and safety sensors on riverfront properties. Battery backup systems get tested hard here.
- Sagging owner-built gates on sandy soil. Post footings shift in the sandy subgrade along Indian River Drive and South Sewall’s Point Road. The gate drops, the latch misses, and the operator strains.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Sewall’s Point, FL
Gate repair in Sewall’s Point runs from about $250 for a minor sensor or remote issue to $1,500 or more for a full operator replacement with new safety edges and battery backup. Hinge and post realignment typically lands between $425 and $900. Weld repairs on wrought-iron gates run $350 to $1,100. Salt-corroded operator housings with a new control board fall between $650 and $1,400. Every job is quoted in writing before any work starts, so you approve the number before we turn a wrench. Call (833) 570-5807 and we’ll come out, assess the gate, and hand you a written price. Free estimates on all repair work.
We Also Serve Cities Near Sewall’s Point
Our Gate Repair team covers the whole Martin County coastline. We’re regularly in Sewall’s Point, Stuart, North River Shores, Jensen Beach, and down to Hutchinson Island South. If your property sits just over the bridge or a few minutes up the road, the same crew and the same salt-air expertise apply.
Serving Sewall’s Point, FL — Our Local Coverage Area
We’re based in the Sewall’s Point area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sewall’s Point
Direct salt spray from the Indian River and St. Lucie River accelerates corrosion on steel hinges, post brackets, and the metal housing that protects the operator motor. Corrosion eats the hinge first, then the housing, and only eventually the motor itself. We inspect and grease accessible hinge points at least yearly on riverfront properties. If the hinge is already scaling, a proactive replacement is cheaper than an emergency repair after the gate binds. Call (833) 570-5807 and we can assess yours this week.
Check whether the gate has electrical power and whether the manual release works. If the keypad is dead but other power is on, you may have a surge-damaged control board. If the keypad lights up but the gate doesn’t move, windblown sand and shell grit are probably jammed in the track. For your safety, don’t force a motorized gate open by hand. The motor wire connections and capacitor terminals can hold dangerous stored charge. Call us at (833) 570-5807 for a diagnosis and a written repair quote.
Most properties in Sewall’s Point fall under the Town’s zoning and building requirements, not a master HOA, but individual estate lots and private drives can have their own design standards. Any new gate, significant height change, or replacement with a different material or finish usually needs local review. We coordinate with the Town and with property managers when a plan is needed, so the gate repair or replacement doesn’t get held up by a documentation gap. We can tell you early in the process whether your job is repair-as-is or triggers a review.
Automatic gates here need working photo eye sensors, a reverse mechanism that stops and reverses on contact, and on larger estate gates, safety edges that trip before pressure builds. A gate that doesn’t reverse when it meets resistance is a safety defect, and it can’t be ignored. We test all safety devices on every repair visit. If a sensor is misaligned or a safety edge is split, we replace it before we call the job done. Call (833) 570-5807 for a safety check on your gate and operator.
Yes, and these are common on Sewall’s Point estates. Owner-built wrought-iron gates often lack the uniform dimensions of factory gates, so every hinge, stile, and post connection is slightly different. We fabricate replacement sections and weld to match the existing work, including gates anchored in coral-rock pillars. The repair approach is the same: fix the structural failure, protect the steel from salt, and re-align the operator. We won’t talk you into a new gate unless the existing one is genuinely not worth saving.
Call Miami Gate Company for Gate Repair in Sewall’s Point
If a driveway gate isn’t opening, a dock gate is seized, or a storm left your slider jammed, call (833) 570-5807. Ruben Castellano and the Miami Gate Company team work on the gate you have, fix the real problem, and give you a written price before any work starts. Free estimates throughout Sewall’s Point.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Sewall’s Point and Martin County.