Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Sewall’s Point, FL | Miami Gate Company
We provide independent our Gate Repair in Sewall’s Point for Ghost Controls systems across Florida – every residential driveway, dock gate, and custom estate entry on the peninsula. Most of our Ghost Controls work here isn’t a board swap or a motor replacement. It’s the salt-corrosion hinge, the binding arm, or the battery that collapses on the first swing. If you need a Ghost Controls specialist who knows how the Indian River air treats this equipment, call (833) 570-5807.
Why Sewall’s Point Residents Choose Us for Ghost Controls Service
Ruben Castellano, our owner, spent the better part of two decades diagnosing gate failures across South Florida before focusing our shop on Ghost Controls and the other major brands. He’s seen what looks like a blown control board turn out to be a river-side hinge packed with salt and shell grit. That’s why our first step is always the same: trace the actual fault before we touch parts. Sewall’s Point homeowners call us because we speak Ghost Controls fluently – the AR and AX-series boards, the solar harness, the arm geometry – and because we don’t guess with someone else’s money. We’re an independent gate company, not Ghost Controls authorized or manufacturer-affiliated, so the recommendation you get is about what your gate actually needs, not what a single brand’s network wants us to sell.
Our team works on nine major gate brands including LiftMaster, FAAC, BFT, DoorKing, and Mighty Mule. That cross-brand training matters here, because many Sewall’s Point estates have more than one gate from more than one manufacturer, and we can service them all without calling in anyone else. For a full picture of our Ghost Controls work, see our Ghost Controls sales & service page.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Sewall’s Point
- Salt-seized hinge pivots and actuator arms. Salt spray off the Indian River and St. Lucie River pits and seizes the actuator arm and hinge pivot long before the motor windings fail. The gate drags, the arm strains, the board reads it as an obstruction, and the opener reverses halfway through the cycle. We pull the hinge, clean the pivot, replace worn hardware, and re-set the arm limits.
- Corroded control box terminals and battery leads. Wind-driven rain and salt film penetrate the operator housing and control box. We regularly find green-crusted terminals and corroded battery leads inside housings whose exterior still looks clean. A Ghost Controls unit can fail intermittently for weeks before it dies completely, and this is usually why.
- Backup battery collapse under load. Post-storm power loss strands Ghost Controls units whose 12V backup battery was never load-tested. A battery that reads 12 volts at rest collapses under the first swing, and the gate stops halfway. We test batteries under actual load, not just with a voltmeter, and replace them before the next named storm.
- Slide gates jammed with windblown sand and shell grit. Sliders on river-side drives bind after a storm when sand and shell grit pack into the track. The operator trips on obstruction while the gate leaf itself is stuck. The fix is cleaning the track, checking the wheels and rollers, and confirming the operator isn’t fighting a bound leaf.
- Post and pillar movement on custom entries. Masonry, wrought-iron, and coral-rock pillar entries settle and shift over time, especially after heavy rain. When the post moves, the Ghost Controls arm geometry goes off, the gate drags, and the opener wears itself out trying to compensate. We re-plumb the post, re-set the hinge alignment, and re-calibrate the operator.
Ghost Controls Service in Sewall’s Point: What Local Conditions Mean for Your Equipment
Sewall’s Point is a low-density, waterfront residential peninsula of estate lots and private drives off Sewall’s Point Road and Indian River Drive. Almost every gate here is a private driveway or dock/seawall access gate on salt-exposed property. There is essentially no commercial or HOA-managed gate inventory like a mainland city would have. That changes how Ghost Controls repair work plays out here in a very specific way: nearly every call is a one-off diagnostic on a custom owner-built entry, not a repeat visit to a shared gate. The housing stock is large custom single-family estates and older waterfront ranch homes with elaborate masonry, wrought-iron, and coral-rock pillar entries. These gates were typically owner-built or custom-installed rather than tract-builder standard, which means the install workmanship varies widely. We see Ghost Controls kits adapted to gate weights and arm lengths they were never engineered for. That’s a fixable problem – it just takes someone who knows the equipment’s limits and isn’t afraid to tell you the truth.
Ruben’s methodical approach shows up in the field vignette we tell clients on river-side drives off Indian River Drive. A Ghost Controls dual-swing kit on a custom wrought-iron entry would open halfway and reverse. The board and battery tested fine. The real fault was the river-side hinge pivot, packed with salt corrosion and shell grit so the leaf dragged and the arm read obstruction on every cycle. We pulled and cleaned the hinge, replaced the worn pivot hardware, re-plumbed the coral-rock pillar post, and re-set the arm limits. The gate now cycles clean on both leaves. We flagged the dock gate upstream for the same service before it strands them. That’s the difference between a generalist and a gate specialist.
Ghost Controls Models & Products We Service in Sewall’s Point
We service the full Ghost Controls residential lineup you’re likely to find on Sewall’s Point properties: the AR Series single-swing automatic gate opener (AR155/AR185-class kits), the AX Series dual-swing opener (AX220-class kits), solar-ready swing kits with 12V battery and panel, and tube-gate or slide-style retrofit kits. Our approach on parts is straightforward: we use the right component for the job, whether that’s an OEM Ghost Controls part or a quality aftermarket equivalent when availability or lead time is a factor. For Sewall’s Point turnaround, we keep common failure items on hand – hinge pivot hardware, battery leads, terminal blocks, and 12V backup batteries – so a repair doesn’t stall while we wait on a shipment. If we don’t stock it, we tell you before we order it.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Sewall’s Point
Ghost Controls gate repair in Sewall’s Point typically runs between $180 and $340 for common fixes like hinge cleaning and re-alignment, limit switch adjustment, battery replacement, or control board diagnostics. More involved work – replacing a corroded operator housing, re-plumbing a shifted coral-rock pillar, or retrofitting a tube-gate kit – lands in the $400 to $1,100 range depending on the access, the gate weight, and the parts involved. A full new Ghost Controls operator kit with installation runs $700 to $3,300, with the variance driven by single vs. dual swing, solar vs. AC power, and gate construction. Every job is quoted and agreed before any work starts – the number we give you is the number on the invoice. Estimates are free. Call (833) 570-5807 and we’ll come out, diagnose the gate, and give you a written price.
Serving Sewall’s Point, FL — Our Local Coverage Area
We’re based in the Sewall’s Point area and know this community well, and we also serve Ghost Controls in Stuart. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Sewall’s Point
Because a battery that reads 12 volts at rest often collapses under the load of the first swing. That drops the voltage to the control board mid-cycle, and the gate stops or reverses. We load-test the battery rather than trusting a static reading, and on Sewall’s Point we see this on units that lost power during a storm and were never load-tested after. Call (833) 570-5807 for an exact quote – estimates are free.
The arm is almost always fighting a bound hinge or a shifted post. On Sewall’s Point, salt corrosion in the hinge pivot is the most common culprit – the leaf drags, the arm strains, and the board reads it as an obstruction even though the motor itself is healthy. We clean or replace the pivot, check the arm geometry, and recalibrate the limits.
We check whether the gate leaf is physically bound in the track. Windblown sand and shell grit pack the track on river-side drives, and the operator trips on obstruction before the gate ever moves. We clear the track, inspect the wheels and rollers, test the operator’s force settings, and then confirm the control board and battery are responding.
Yes, and that’s a big part of what we fix on Sewall’s Point. Custom wrought-iron and masonry entries are heavier, wider, and more wind-loaded than the tract-home gates most Ghost Controls kits are engineered around. The arm length, hinge placement, post plumb, and force settings all have to be matched to the actual gate. When someone eyeballs it, the operator works for a few months and then starts straining and reversing. We measure and set it correctly the first time.
We’re an independent gate company – not Ghost Controls authorized, sponsored, or endorsed – so repairs we perform don’t extend or void the manufacturer’s warranty either way. What we do is fix the gate correctly and tell you plainly when a Ghost Controls unit is worth repairing and when replacement is the smarter spend. That honesty is what keeps Sewall’s Point calling us back. Call (833) 570-5807 for a free estimate.
Service Areas Near Sewall’s Point
We run Ghost Controls service throughout Martin County and the Treasure Coast. If your gate is in Sewall’s Point service area or nearby, we’ve got you covered. We also work the barrier island communities and mainland neighborhoods around Stuart, Jensen Beach, Palm City, Hobe Sound, and Port Salerno. For customers just south, see our Ghost Controls service in Island Walk page. Just north, our Ghost Controls service in North River Shores page covers that stretch of the Indian River Lagoon.
Book Your Ghost Controls Service in Sewall’s Point Today
If your Ghost Controls gate is acting up – stopping halfway, reversing for no reason, or dead after the last storm – call (833) 570-5807. We’ll diagnose it, quote the repair before any work starts, and get your gate running again. Sewall’s Point is our backyard, and Ghost Controls is one of the brands we know cold.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Sewall’s Point and the Treasure Coast.