Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in Broadview Park, FL | Miami Gate Company
Mighty Mule gate repair in Broadview Park usually comes down to two failures: control board corrosion from salt-humid air, or battery death after hurricane-season outages. We’re Miami Gate Company, an independent Mighty Mule service in Fort Lauderdale and Broadview Park, working across the 33317 ZIP and the unincorporated Broward County parcels off State Road 7. Our technicians carry OEM control boards, arms, and receivers so most Mighty Mule visits are one-and-done. Call (833) 570-5807 for a free estimate.

Why Broadview Park Residents Choose Us for Mighty Mule Service
Gates are all we do. That focus matters when a Mighty Mule FM500 stops responding after a storm and the fix could be a corroded limit-switch terminal, a dead battery, or a binding arm. We diagnose all three before quoting anything. Ruben Castellano, our owner at Miami Gate Company, built his methodical approach to operator troubleshooting on the motor and control-circuit fundamentals he learned studying Industrial Mechanics at Miami Dade College, then sharpened it across almost two decades of South Florida gate failures. If you don’t know exactly what failed, you’re just guessing with someone else’s money. In Broadview Park and nearby Mighty Mule in Plantation, where mid-century single-family homes and small commercial lots along US-441 mix with year-round humidity, guessing wastes a lot of money.
We service the full Mighty Mule sales & service lineup, and because we’re independent, we use OEM parts when they’re available and quality aftermarket equivalents for out-of-production models. We never push a replacement just because a unit is old. We push the fix that actually solves the failure.
Styles & brands we work with





Common Mighty Mule Gate Repair Problems We Solve in Broadview Park
- Control board corrosion. Older FM-series Mighty Mule boards show green oxidation on the terminal blocks within a few Broadview Park summers. The result is erratic opening, stuck gates, or remotes that get ignored. We clean, repair, or replace the board and seal the housing properly afterward.
- Battery backup failure. The sealed lead-acid batteries in MM360 and MM560 operators degrade fast in South Florida heat. After a storm knocks out power, the gate shows a “no power” condition even with AC restored. We test the battery under load and replace it when it’s drifted below spec.
- Arm and hinge fatigue on swing gates. Heavy or misaligned gates on Broadview Park’s older properties force the aluminum arm and pivot points on single-arm Mighty Mule units to work harder than designed. Binding, motor strain, and eventual arm failure follow. We rebuild hinge points, realign the gate, and reset travel limits.
- Water intrusion in keypads and receivers. Summer thunderstorms drive rain into older Mighty Mule keypads and remote receivers. Stuck keys, dead buttons, and shortened remote range are common in Broadview Park where storms arrive with little warning. We replace or seal the affected components.
- Post-storm gate misalignment. High winds shift gate posts and concrete footings enough to throw off Mighty Mule travel limits. The gate starts and stops unpredictably. We reset limits and reinforce the mounting so the next storm doesn’t undo the work.
Mighty Mule Service in Broadview Park: What Local Conditions Mean for Your Equipment
Broadview Park is unincorporated Broward County, not a city, so gate operator replacements fall under Broward’s High-Velocity Hurricane Zone rules. That means a new Mighty Mule unit and its mounting must carry Miami-Dade NOA or Florida product approval before a permit gets pulled. Homeowners often learn this only when the inspector shows up. We know the requirement because we work along the US-441/State Road 7 corridor every week, including Mighty Mule repair in Broward Estates, and we bring HVHZ-compliant mounting hardware by default on replacement jobs. The salt-humid air compounding that is the other Broadview Park reality: corrosion doesn’t just hit control boards, it eats hinge pins, track rollers, and the arm pivot bolts on Mighty Mule operators faster than it does six miles inland. We factor both into every diagnosis here.
A homeowner on the 3000 block of SW 20th Street called us when their Mighty Mule FM500 swing gate quit responding after a thunderstorm. The control board had corrosion on the limit-switch terminals and the backup battery was dead. We replaced both with OEM parts, realigned the gate arm, and that operator has run through two subsequent storm seasons without a hiccup.
Mighty Mule Models & Products We Service in Broadview Park
We work on the Mighty Mule FM350, FM500, MM360, and MM560 lines, plus older FM-series units still hanging on across Broadview Park’s 1950s and 1960s ranch-style homes. For current models we use OEM control boards, arms, and receivers when available because they match the original engineering and preserve compatibility. For out-of-production units we source aftermarket equivalents that meet or exceed OEM specs. We stock the most common replacement parts for fast turnaround in Broadview Park, so you’re not waiting on a cross-country shipment while your gate sits open. If your operator is over 10 years old and the gate structure itself is failing too, we’ll tell you plainly that replacement is the better investment. We’d rather fix one gate right than sell you something you don’t need.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in Broadview Park
What you’ll pay depends on what failed. A corrupted control board on an FM350 or FM500 runs higher than a simple limit-switch reset, and battery replacements are priced by the amp-hour rating of the sealed unit. OEM Mighty Mule parts cost more than generic substitutes, but they’re the right call for current-model units. We quote the full price before any work starts, so there’s no invoice surprise at the end. The estimate is free, whether you call for a remote that won’t pair or a gate arm that’s visibly bending. Call (833) 570-5807 and we’ll walk through what you’re seeing.
Serving Broadview Park, FL — Our Local Coverage Area
We’re based in the Broadview Park area and know this community well, including Mighty Mule in Lauderhill nearby. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in Broadview Park
My Mighty Mule gate opener stopped working after a power outage – what’s the most likely cause? The backup battery is almost always the culprit. In Broadview Park’s heat, sealed lead-acid batteries in MM-series units degrade quickly, so after an outage the unit can’t hold settings or respond even with AC power restored. We test it under load and replace it if it’s drifting. Call (833) 570-5807 for a battery check.
Do I need a permit to replace my Mighty Mule gate operator in Broadview Park? Yes, and because Broadview Park is unincorporated Broward County, the replacement must meet High-Velocity Hurricane Zone rules with Miami-Dade NOA or Florida product approval on the unit and mounting. We handle that compliance as part of our replacement work.
Why does my Mighty Mule remote only work when I’m standing right next to the gate? Water intrusion in the receiver or keypad is the usual reason, especially after a Broadview Park downpour. Driving rain gets into older Mighty Mule receiver housings and corrodes the antenna connection or shorts the board. We clean, re-seal, or replace the receiver to restore normal range.
Can you repair a Mighty Mule gate arm that’s bent or binding? Yes. Much of the time the arm itself isn’t the root problem – it’s the pivot points and gate alignment forcing the arm out of geometry. We rebuild hinges, realign the gate, and replace the arm if it’s been fatigued beyond safe use. Electric gate repair and hinge work are core services for us.
Is it worth repairing a 12-year-old Mighty Mule opener or should I replace it? If the operator is over 10 years old and the gate structure is also showing its age, replacement usually makes more sense. But if the opener is otherwise solid and the failure is a single component, we’ll repair it and tell you honestly. Call (833) 570-5807 for a straight answer on your specific unit.
Service Areas Near Broadview Park
We run Mighty Mule service across the surrounding area, including Broadview Park service area coverage and nearby neighborhoods. If you’re just east toward Fort Lauderdale or south toward the Miami-Dade line, we cover Mighty Mule service in Pine Island Ridge and Mighty Mule service in Naranja as well.
Book Your Mighty Mule Service in Broadview Park Today
If your Mighty Mule gate is stuck, erratic, or dead after the last storm, call (833) 570-5807. We’ll send a technician who works on Mighty Mule units every week, not a generalist who’ll learn on your dime. Estimates are free, and we quote before any work begins.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Broadview Park and South Florida.