Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Andover, FL
Gate installation in Andover, FL starts with understanding what this neighborhood throws at a gate system. We’re talking about 1950s through 1970s concrete-block ranch homes on small lots, many still holding their original wrought-iron driveway gates. The salt-laden humidity from nearby Hollywood beaches, combined with hurricane-season wind loads and aggressive rainy-season plant growth, means a new gate here has to be built differently than one going in 20 miles inland. Miami Gate Company has served Andover since 2012, and we’ve learned exactly what fails first in this climate. Call (833) 570-5807 for a free estimate on any gate project.
Why Andover Homes Are Different
Andover is a small unincorporated Broward County community squeezed between Hollywood and Miramar. Nearly every property is a single-family home behind a driveway or perimeter gate. What makes gate work here different is the combination of older housing stock and relentless subtropical conditions. Homes along Southwest 56th Avenue and Pembroke Road sit on compact lots where gates are close to the street, close to salt air, and close to whatever the property line has been growing for 60 years.
The original gates on these mid-century ranches were typically wrought iron with welded hinges. After five or six decades of salt-laden humidity, those hinges rust solid. The posts, whether concrete-set steel or wood, shift as the sandy soil cycles through wet and dry seasons. Automatic openers corrode from the inside out. And the vegetation – ficus, bougainvillea, overgrown hedges – sends roots and vines straight into sliding gate tracks after every rainy season. A gate that worked fine in March can bind hard by September. Technicians who only know freeze damage and frost heave miss these problems entirely. We diagnose for South Florida failure modes specifically.
Styles & brands we work with
Our Main Andover Services
Most calls we get from Andover fall into two categories: repairs on aging gate hardware, and electrical problems with automatic openers. Both are covered below, with dedicated pages for each.
Gate Repair in Andover
Older Andover gates fail in predictable ways: rusted hinges, sagging leafs, posts pulled out of plumb by shifting soil, and hardware that simply wore out decades ago. We repair rather than replace whenever the structure is sound, which keeps costs down on homes where the original gate still has decades of life left. Salt-air corrosion is the dominant issue here, and we treat every repair with that in mind, using hardware rated for coastal exposure. For the full breakdown of what we fix and what it costs, see Gate Repair in Andover.
Electric Gate Repair in Andover
Automatic gates in Andover face two enemies: humidity eating the control board and motor, and vegetation throwing off the limit travel. When an opener stops responding, runs jerkily, or reverses for no reason, we diagnose the motor, board, sensors, and wiring – not just the obvious parts. Many local systems are older Linear, Mighty Mule, or Ghost Controls units that were never properly sealed for coastal air. For the full scope of electric gate work, see Electric Gate Repair in Andover.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Andover
Installing a new gate in Andover means building for salt air, hurricane wind loads, and a property that may have had a gate swinging on the same posts since Lyndon Johnson was in office. The most common call we get is from homeowners whose original driveway gate is beyond repair, or who want to convert a manual gate to automatic for the first time. The job here is rarely just hanging a gate. It’s evaluating the posts, the soil, the swing clearance, and the power source, then building a system that will hold up to South Florida’s specific abuse. New installations should be specified for coated or stainless hardware, properly sealed operators, and clearance from the vegetation that will otherwise be inside the track within one growing season. We handle the full Gate Installation scope, from a simple single-leaf driveway gate to a full automated sliding system.
Driveway Gate Installation
Signs you need it
The existing gate is rusted through at the hinges, the posts are leaning or cracked, or the gate no longer closes squarely and binding is worsening each season.
What it costs in Andover
Budget $2,500 – $8,500 for a complete driveway gate installation in Andover depending on material, width, and whether automation is included from day one.
How we do it
We remove the old gate and hardware, set or repair posts in concrete rated for South Florida soil, hang and square the new gate, then verify swing clearance and latch alignment with the gate loaded as it will be in daily use.
Sliding Gate Installation
Signs you need it
Your lot slopes toward the driveway, swing clearance is tight because the driveway is short, or you’re tired of vines and roots jamming a swing gate’s arc every wet season.
What it costs in Andover
Sliding gate installation in Andover typically runs $4,000 – $12,000 including track, gate, and operator if you’re automating it.
How we do it
We set the track on a concrete pad with proper drainage so rainy-season water doesn’t pool under the gate, install the gate and rollers, then verify travel limits if an operator is involved.
Automatic Gate Installation
Signs you need it
You’re done getting out of the car in a downpour to swing a gate open, or you want controlled access without replacing the manual gate you already have.
What it costs in Andover
Adding automation to a gate in Andover generally falls between $1,500 and $4,000 including the operator, mounting hardware, and basic safety sensors.
How we do it
We match the operator to the gate’s weight and swing or slide geometry, run power and low-voltage wiring, install safety edges or photo eyes, and program remotes and keypads on site.
What Gate Installation Costs in Andover
| Item | Typical range in Andover |
|---|---|
| Driveway gate installation | $2,500 – $8,500 |
| Sliding gate installation | $4,000 – $12,000 |
| Automatic gate operator installation | $1,500 – $4,000 |
Does a new gate installation in Andover include the concrete work?
Yes. Every gate installation we do in Andover includes whatever concrete work the posts, track, or operator pad requires. We don’t leave you to find a separate concrete contractor. The price is quoted and agreed before any work starts.
How long does a gate installation take in Andover?
Most driveway gate installations in Andover take one to two days. Sliding gates with new concrete pads may need an extra day for the pad to cure before we mount the track. We schedule the work so you know the timeline before we dig. Call (833) 570-5807 for a free measure and written estimate.
Brands We Service in Andover
We work on the brands Andover homes actually have. That includes Ghost Controls, DoorKing, Elite, and Mighty Mule, along with LiftMaster, FAAC, BFT, Linear, and Viking. Our technicians carry common boards, remotes, and safety components for these systems, so most repairs don’t wait on a parts order. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Andover, FL
| Service | Typical range in Andover |
|---|---|
| Driveway gate installation | $2,500 – $8,500 |
| Sliding gate installation | $4,000 – $12,000 |
| Automatic gate operator installation | $1,500 – $4,000 |
| Gate repair, minor (hinges, latch, alignment) | $195 – $450 |
| Gate repair, major (section rebuild, post reset) | $450 – $1,200 |
| Electric gate repair, control board replacement | $350 – $900 |
| Electric gate repair, motor replacement | $500 – $1,400 |
| Safety sensor or photo eye repair | $250 – $500 |
| Wrought iron gate repair, rust treatment and repaint | $400 – $1,200 |
In Andover, prices push toward the higher end when we’re dealing with gates that haven’t been maintained in decades, rusted-solid hardware that needs cutting out, or automation retrofits that require a full power run from the house. Salt-air corrosion and post rot from the wet-dry soil cycle are the two biggest cost multipliers here. Whatever the quote, it’s agreed before any work starts and nothing changes without your approval.
Neighborhoods We Serve in Andover
We cover all of Andover, including the residential streets along Southwest 56th Avenue, the homes off Pembroke Road, and the older ranch-style blocks closest to the Hollywood line. Most service calls in Andover can be scheduled within a few business days, with emergency repair availability for gates that won’t close or secure.
- Southwest 56th Avenue corridor
- Pembroke Road area
- West Andover, near the Hollywood boundary
- East Andover, closer to Miramar
Service Area – Cities Near Andover
Miami Gate Company serves Andover and the surrounding Broward County communities. We regularly work in Carver Ranches, FL, Miramar, FL, West Park, FL, and Hollywood, FL. If your property sits anywhere in this corridor, we can get a technician to you.
Serving Andover, FL — Our Local Coverage Area
We’re based in the Andover area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Andover
Unincorporated Broward County typically requires a permit for new gate installations and for automation that involves a new electrical run. We handle the permit paperwork as part of the installation and make sure the work meets county wind-load requirements. If you’re only repairing an existing gate, permits are rarely needed.
For a gate that won’t close or is stuck open, we prioritize Andover calls and can usually reach the property within one business day, often sooner. Emergency response depends on our current schedule, so call (833) 570-5807 and tell us what’s happening. We’ll give you a straight answer on timing.
Yes. While Andover is mostly single-family homes, we also work on small commercial gate systems for HOAs and small property managers in the area. The same technicians handle both, so the brand and component knowledge carries over directly. If you manage a gated community or commercial property, call us for a site visit and written quote.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Andover Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Javier Mendoza"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Ramon Salazar"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Bryant