Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in White City, FL
Gate installation in White City, FL typically runs $3,200 to $7,800 for a complete automatic driveway gate, depending on whether you’re working with a custom wood or chain-link gate on gravel or a manufactured panel system on concrete. New automatic installations start around $2,600 for a single swing gate with a basic opener, while slide gates on steel track run higher because of the track embedment and motor sizing. We’re Miami Gate Company, and we’ve installed and repaired gates across White City since 2012. If you’re planning a new gate or need an existing one restored, call (833) 570-5807 for a free, no-pressure estimate.
Why White City Homes Are Different
White City is a small, unincorporated Treasure Coast community just south of Fort Pierce where most properties are low-density single-family lots on well and septic. Gate work here is dominated by private driveway and entry gates on individual homesites, not HOA or commercial gate systems. Many driveways are long, unpaved, and set far back from the road. The humid salt-air environment off the nearby Indian River Lagoon corrodes operators and hinges faster than inland Florida, and the loose sandy soil shifts gate posts after heavy summer rains. We regularly see swing gates thrown out of plumb on White City side roads, which then burns out opener motors that have to fight the misalignment every cycle.
Styles & brands we work with
Our Main White City Services
Most calls from White City homeowners are for two things: a gate that no longer closes or latches properly, and an electric opener that has quit responding. Here’s what each involves here.
Gate Repair in White City
White City gate repair usually means rehabbing an aging custom-fabricated wood or chain-link driveway gate, often one that’s been on the property for a decade or more. We true up posts that have settled in sandy soil, replace rusted hinges and latch hardware, and rehang gates so they close square again. The salt air off the lagoon is hard on every exposed steel part. If your gate drags, sags, or won’t latch, the right fix here is almost never a new gate. It’s the right diagnosis and the right hardware. For the full scope, see Gate Repair in White City.
Electric Gate Repair in White City
Electric gate repair in White City means diagnosing the motor, control board, safety sensors, and wiring on a system that may have been retrofitted years ago onto an older gate. We carry parts and boards for Ghost Controls, DoorKing, Elite, Mighty Mule, and other brands, and we work at the component level instead of guessing. On unpaved lots with shifting posts, we often find the opener burning itself out against a gate that no longer swings true. We fix the alignment and the electronics together. For details on operator and board repair, see Electric Gate Repair in White City.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in White City
New gate installation in White City is usually for homeowners on larger lots who want a proper automatic driveway gate, often replacing a manual gate that was never automated or rebuilding a setup that’s past saving. We install automatic and slide gates on concrete pads or steel track, size openers for the gate’s actual weight and cycle load, and build for the salt air and sandy soil here so the system holds up. We handle the full Gate Installation scope, from the first measure to the final safety check on the energized operator.
Automatic Gate Installation
Signs you need it
You want a gate that opens from the car and closes behind you, without getting out to swing it by hand.
What it costs in White City
A complete new automatic gate installation in White City typically runs $3,200 to $7,800, with new automations on existing gates starting around $1,100 to $2,200.
How we do it
We measure the opening and driveway grade, set posts in concrete, hang the gate, mount the operator, and wire and test the controls and safety edges.
Driveway Gate Installation
Signs you need it
Your driveway has no gate, or the existing one is too narrow, too low, or too far gone to rebuild.
What it costs in White City
New driveway gate installation in White City starts around $2,600 for a single swing gate and runs $3,800 to $9,500 for a slide gate on steel track.
How we do it
We build the gate to the driveway’s width and traffic pattern, then set the posts or track and install the opener for the gate’s weight.
What Gate Installation Costs in White City
| Item | Typical range in White City |
|---|---|
| New automatic gate, complete (single swing) | $3,200 – $7,800 |
| New slide gate with steel track and motor | $3,800 – $9,500 |
| Automation added to an existing gate | $1,100 – $2,200 |
Can you install a gate on a gravel or unpaved driveway in White City?
Yes. We set posts in concrete below grade and account for the loose sandy soil, so the gate doesn’t shift after heavy summer rains. Call (833) 570-5807 for an exact quote on your driveway.
How long does a gate installation take in White City?
Most single swing gate installations are done in one to two days once the gate is fabricated and parts are on site. Slide gates and custom work take longer. Call (833) 570-5807 and we’ll give you a straight timeline.
Brands We Service in White City
We work on virtually any gate system. In White City, that usually means Ghost Controls and Mighty Mule openers on residential swing gates, and DoorKing or Elite operators on heavier commercial or long-driveway slide gates. We stock common boards, remotes, and safety parts locally, which cuts turnaround on most repairs. See our brands for the full range.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in White City, FL
| Service | Typical range in White City |
|---|---|
| New automatic gate, complete (single swing) | $3,200 – $7,800 |
| New slide gate with steel track and motor | $3,800 – $9,500 |
| Automation added to an existing gate | $1,100 – $2,200 |
| Gate repair, minor (hinges, latch, realignment) | $180 – $450 |
| Gate repair, major (post reset, weld, frame rebuild) | $550 – $1,200 |
| Electric gate repair, standard service call | $225 – $650 |
| Electric gate repair, major (control board, motor replacement) | $750 – $1,900 |
| New gate opener motor | $650 – $1,600 |
| Control board replacement | $400 – $900 |
| Safety sensor replacement or realignment | $150 – $350 |
| Remote or keypad programming | $75 – $200 |
In White City, prices tend to push toward the upper end when posts have shifted in sandy soil and need to be reset, or when salt corrosion has frozen hinges and operator housings onto their mounts. Whatever the job, we quote the full price before any work starts, and that number is the number you pay.
Neighborhoods We Serve in White City
We cover all of White City’s 34982 ZIP code, from the streets off Midway Road down to the quieter lots near the lagoon side. Response time for this area is typically within one business day for most repair calls.
- White City central, near Midway Road
- Lots off Orange Avenue and side roads
- Properties along or near the Indian River Lagoon side
- Unpaved and gravel-lot homesites throughout 34982
Service Area – Cities Near White City
White City sits just south of Fort Pierce, so we also run calls through the surrounding Treasure Coast communities. We serve Indian River Estates, FL to the north and Fort Pierce South, FL right next door. We cover Fort Pierce, FL and Fort Pierce North, FL for larger residential and commercial gate systems. Wherever you are near White City, call (833) 570-5807.
Serving White City, FL — Our Local Coverage Area
We’re based in the White City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in White City
Most White City repair calls are scheduled within one business day. If a gate is stuck open and the property is unsecured, we make it a priority. Call (833) 570-5807 to get on the schedule.
White City is unincorporated St. Lucie County, so permits depend on the specific project, especially for new electrical runs or right-of-way work. We handle the county-side paperwork on installations and can tell you exactly what your project requires.
Yes, most of our White City work is on older custom-fabricated gates rather than newer manufactured systems. We rebuild, re-hang, and re-automate what you have whenever the structure is sound. If it’s not, we’ll tell you straight and quote a replacement.
For a free estimate on any gate job in White City, call Miami Gate Company at (833) 570-5807. We’ll quote the price before any work starts, and we won’t sell you a system you don’t need.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What White City Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Chris Norris"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Alma Vargas"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Bethany Hayes