Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Juno Beach, FL
Gate installation in Juno Beach usually means a driveway gate on a barrier-island property, built to hurricane code and specified for salt air. We’re Miami Gate Company, and we handle the full job: operator sizing, post setting, panel fabrication or sourcing, control board wiring, safety sensors, and final adjustment. If you own a condo association entry gate off A1A or a private estate gate a block from the beach, call (833) 570-5807 and we’ll walk the site and write a plan that fits the property.
Why Juno Beach Homes Are Different
Juno Beach is a narrow coastal town in ZIP 33477, and the housing stock splits into two types that both create unusual gate work. The older low-rise condos from the 1960s through the 1980s often have manual slide gates or aged swing gates on galvanized posts, many showing decades of salt exposure. The newer multimillion-dollar oceanfront and Intracoastal estates have automated operators paired with heavy driveway gates, and those jobs come with their own complications. What unites them is the environment. Salt-laden air off the Atlantic accelerates corrosion of hinges, tracks, chains, and operator housings faster than almost anywhere else we work. On the ocean-side blocks, we regularly open gate motors and control boards that look fine on the outside but have corroded terminals, rusted limit switches, and failing chassis grounds on the inside. Hurricane season adds another layer: high-wind-rated gates, reinforced posts, and post-storm realignment after surge and debris. Almost every job here sits within a few blocks of A1A and the beach, which means the hardware has to be selected differently than it would be ten miles inland.
Styles & brands we work with
Our Main Juno Beach Services
Most calls we take from Juno Beach fall into two categories: a gate that has stopped working altogether, and a gate with an electrical or automation fault. Here is what each job looks like on a barrier-island property.
Gate Repair in Juno Beach
When a gate stops swinging or sliding properly in Juno Beach, the cause is usually mechanical wear or corrosion rather than a failed operator. We remove the gate from its hinges or track, inspect hinge pins and roller trucks, re-weld or replace cracked sections, and resize a gate that has sagged out of square. Salt air here attacks gate hardware from the inside out, so we check fasteners, welds, and internal post brackets even when the visible parts look fine. For the full scope of what we handle on repairs, see our Gate Repair in Juno Beach page.
Electric Gate Repair in Juno Beach
Electric gate failures in Juno Beach often trace back to the control board, safety sensors, loop detectors, or wiring connections that have been compromised by humid maritime air. We diagnose at the component level: checking the motor capacitor, transformer output, limit switches, photo-eye alignment, and the low-voltage wiring run from the panel to the operator. We carry boards and parts for multiple brands and can usually get a Juno Beach gate running without replacing the entire system. For a deeper look at the electrical side, read our Electric Gate Repair in Juno Beach page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Juno Beach
New gate installation in Juno Beach solves two recurring problems on barrier-island properties: hardware that has corroded past the point of economical repair, and homes where the existing gate was never built for current wind-load requirements. Whether you’re replacing an older manual slide gate on a 1970s condo entry or adding a new automated driveway gate to an estate near the Intracoastal, we build the system around the site conditions, not a catalog photo. Our Gate Installation work always starts with a measured site visit, a written scope, and a price you approve before any material gets ordered.
Driveway Gate Installation
Signs you need it
Your existing gate sags, binds on the ground, or no longer closes cleanly because the posts have shifted in sandy barrier-island soil.
What it costs in Juno Beach
Driveway gate installation in Juno Beach typically runs $2,500 to $7,500 for a single swing or slide gate depending on the panel and operator.
How we do it
We set new posts below the local frost-influenced grade, hang the gate level, install the chosen operator, wire safety sensors, and program travel limits and force settings.
Sliding Gate Installation
Signs you need it
Your driveway has limited swing clearance, or you want a gate that stays functional through a storm when wind loads make a swing gate impractical.
What it costs in Juno Beach
Sliding gate installation in Juno Beach typically ranges from $3,000 to $8,500, with salt-rated track and roller hardware adding cost near the ocean.
How we do it
We pour a level track bed, anchor the track and gate posts, set the sliding panel, install the operator and rack, then commission the safety loops and sensors.
What Gate Installation Costs in Juno Beach
| Item | Typical range in Juno Beach |
|---|---|
| Single driveway swing gate with operator | $2,500 – $7,500 |
| Sliding driveway gate with track and operator | $3,000 – $8,500 |
| Marine-grade hardware upgrade for ocean-side lots | Add 15 – 25% to the gate package |
Do I need a permit for a gate in Juno Beach?
Most Juno Beach gate installations require a permit, especially for automated systems with safety sensors on the barrier island. We handle the permit paperwork and drawings as part of the job.
How long does a Juno Beach gate installation take?
Most driveway gate installations in Juno Beach take one to three days on site after parts arrive, depending on post concrete cure time and whether we’re running power to a new location.
Brands We Service in Juno Beach
We work on Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and we’re trained across competing platforms so the fix matches the system you own. We stock common control boards, remote receivers, and safety sensors for a fast turnaround on Juno Beach calls. See our brands for the full scope.
Pricing for Gate Company in Juno Beach, FL
| Service | Typical range in Juno Beach |
|---|---|
| Gate repair diagnosis and minor hinge/roller adjustment | $150 – $400 |
| Gate panel realignment or re-welding | $300 – $900 |
| Electric gate control board replacement | $450 – $1,200 |
| Safety sensor or photo-eye replacement | $200 – $500 |
| Driveway gate installation | $2,500 – $7,500 |
| Sliding gate installation | $3,000 – $8,500 |
| Marine-grade hardware upgrade for ocean-side lots | Add 15 – 25% to the gate package |
Salt air and hurricane wind-load requirements push Juno Beach pricing toward the upper part of each range, especially when we’re replacing hardware on the ocean-side blocks of 33477. Whatever the job, you’ll get a written price before we start, and we don’t change that number unless you approve a change in scope.
See the difference
Before
After
Before
After
Before
AfterNeighborhoods We Serve in Juno Beach
We work throughout Juno Beach and the surrounding 33477 area, from the condos along A1A to the estates west toward the Intracoastal and north toward the Jupiter line. Our typical response time for a Juno Beach call is one to two business days for non-emergency work.
- Oceanfront estates near Marcinski Road and the beach
- Intracoastal properties along the western edge of town
- Condo communities off Donald Ross Road
- Single-family homes around Loggerhead Park
- Properties near the Juno Beach Pier
Service Area – Cities Near Juno Beach
We also serve the neighboring communities around Juno Beach. If your gate is in Limestone Creek, FL, Jupiter, FL, Tequesta, FL, or North Palm Beach, FL, the same multi-brand gate expertise applies. Each of these areas has its own mix of coastal condos, older single-family streets, and newer estate gates, and we handle all of them.
Serving Juno Beach, FL — Our Local Coverage Area
We’re based in the Juno Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Juno Beach
We schedule most Juno Beach calls within one to two business days. Emergency gate-down situations on occupied properties get priority routing when our calendar allows. Call us and we’ll give you a specific window, not a vague promise.
Yes. We work with HOAs and property managers in Juno Beach on shared entry gates, exit loops, access control integration, and post-storm repairs. The same technician handles diagnosis and repair, so there’s one point of contact for the whole system.
We price by the actual scope of work, not by what another company guessed. Bring us a written quote and we’ll compare it line by line to make sure you’re looking at the same parts, the same safety equipment, and the same job. Estimates are free.
Contact Miami Gate Company in Juno Beach
If your gate is down, sticking, making noise, or you’re planning an installation, call (833) 570-5807. We’ll walk the site, explain what’s actually wrong, and give you a free written estimate before any work begins. Miami Gate Company serves Juno Beach for gate repair, electric gate repair, and new gate installation.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Juno Beach Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Alma Vargas"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Bethany Hayes"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Javier Mendoza