Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Marco
If your gate in Marco has stopped opening, is sagging on its hinges, or the operator makes noise but does not move, the problem is usually one of three things: a seized hinge, a failed control board, or a post that has shifted out of alignment. We fix all three, and most Marco repairs take a single visit. Miami Gate Company works on virtually any gate system you have, from legacy swing gates on canal-front estates to newer aluminum driveway gates in gated communities. Call (833) 570-5807 and we’ll schedule a tech to your Marco property, diagnose the problem on site, and quote the repair before any work starts.
Why Miami Gate Company Is Marco’s Preferred Gate Repair Company
Gates are all we do, and that focus shows in the diagnosis. We’re not a fencing company that also hangs the occasional gate, and we’re not married to a single manufacturer. Our technicians are trained across nine major gate and operator brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means when we arrive at a Marco home, we diagnose what the system actually needs, not what a brand rep told us to sell. Ruben Castellano built the company around that simple idea: fix what’s broken, retrofit what can be saved, replace what’s genuinely done.
We’ve serviced gates throughout Marco Island, from Hideaway Beach to the canal-front streets off Collier Boulevard, and the failure patterns here are consistent. Salt air, humidity, and storm-season wind. A tech who has only worked inland gates will misdiagnose a Marco corrosion problem as a motor failure, and that wastes your money. We know the difference because we see it every week. When you call for Gate Repair in Marco, you get a specialist who knows the local failure modes before they even open the gate box.
Styles & brands we work with
Metal Gate Repair in Marco
Metal Gate Repair in Marco almost always comes down to corrosion, alignment, or metal fatigue at the hinge line. Most Marco metal gates are aluminum or wrought-iron style, and after a decade or two of Gulf Coast salt air, the hardware gives out long before the gate panel itself. A typical metal gate hinge replacement in Marco runs $180 – $420 per hinge, depending on access and whether we’re retrofitting marine-grade stainless hardware. A full realignment with post shimming and operator adjustment typically runs $350 – $700. If welding is needed for a cracked frame or broken picket, expect $150 – $300 per weld point.
Hinge and Post Rehabilitation
On Marco Island, the seaward-facing hinge on canal-front and Gulf-front gates routinely seizes while the inland hinge remains functional. That’s not a coincidence. The salt-laden onshore breeze hits one side of the gate constantly and the other almost never. We replace the seized hinge with marine-grade stainless or sealed-bearing hardware, then re-lube and re-torque the inland hinge so the gate swings evenly. Skipping this asymmetric repair is the most common reason a Marco gate sags again within a year.
Weld and Rust Repair
Older Marco metal gates often show rust at the bottom rail, where irrigation overspray and pooled salt water sit. We grind out the rust, assess the remaining metal thickness, and weld in reinforcement where the frame is still sound. If the rust has compromised the structural integrity, we’ll tell you straight rather than patching a gate that needs replacement. The quote you get before work starts is the price, period.
Wood Gate Repair in Marco
Wood Gate Repair in Marco typically involves moisture warping, hinge pullout from softened post wood, and rot at ground contact. The subtropical humidity here keeps wood gates damp year-round, which means fasteners loosen and posts rot from the inside. A typical wood gate hinge remounting or post reinforcement in Marco runs $250 – $450. Replacing a rotted post and re-hanging the gate runs $400 – $800 depending on how the post was originally set. If the gate itself is warped beyond straightening, we’ll tell you before you spend money on hardware.
Post Replacement and Footing Reinforcement
Many Marco wood gates were installed in the 1980s and 1990s with shallow footings that predate modern wind-load thinking. When a gate sags, the post has often rotated in the ground. We excavate, re-set the post in concrete with a deeper footing, and brace it while it cures so the gate hangs true. In Marco’s high-wind zone, a post that moves during a storm can tear the hinges out entirely, so this is not a cosmetic fix.
Panel Straightening and Brace Work
A wood gate that drags on the driveway usually has a stretched diagonal brace or a hinge post that has leaned. We re-square the frame, replace the diagonal with pressure-treated or cedar stock, and re-hang. If the panel is too far gone, we’ll show you the rot and explain what a replacement panel costs rather than charging for a repair that will not hold.
Trusted Brands We Service in Marco
We service Gate Repair in Marco across every major operator brand you’re likely to have, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you have a legacy FAAC swing operator on a 1990s canal-front gate, we know it. If you have a newer Ghost Controls or Mighty Mule on a battery-solar setup, we know that too. Because we work on so many systems, our trucks carry the most common control boards, capacitors, and limit switches specific to Marco’s failure modes, so we are not waiting on parts out of Miami for a week. Brand-agnostic means we fix what you have, we’re not here to sell you a system you don’t need.
Common Gate Repair Problems We See in Marco Homes
- Seaward hinge seizure. On canal-front and Gulf-front homes, the hinge facing open water corrodes years before the inland hinge. The gate binds, the operator strains, and eventually the motor burns out. We replace the seized hinge and re-align the gate so the operator stops fighting the gate.
- Obsolete control boards on legacy operators. Many Marco homes still run pre-2000 LiftMaster or FAAC boards that were never designed for this humidity. They fail intermittently first, then completely. We can retrofit a modern board with safety photocells and storm-ready logic without replacing the whole operator, if the motor and gearbox are still sound.
- Worn post footings on older swing gates. Gates installed before Marco’s current wind-load codes often have shallow footings. The post rotates, the gate sags, and the operator’s limit switches start misreading. We re-set the post with a deeper footing and re-hang the gate square.
- Misaligned safety sensors. The heat and humidity in Marco cause sensor brackets and housings to expand and contract, knocking the safety beam out of alignment. The gate reverses or refuses to close. It’s a quick fix, but a homeowner can spend hours chasing it. We re-align and re-seal the sensor housings so the problem does not come back with the next rain.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Marco, FL
Gate repair in Marco typically runs $180 – $700 for most hinge, alignment, and operator repairs. Hinge replacement runs $180 – $420 per hinge. Full gate realignment with post adjustment runs $350 – $700. Control board retrofit on a legacy operator runs $400 – $900 depending on the board and whether we add safety photocells. Welding runs $150 – $300 per weld point. Wood post replacement runs $400 – $800. A full operator replacement, when the motor and board are both done, typically runs $1,800 – $4,500 installed, depending on brand and gate weight. Every quote is given and agreed on site before we touch a single bolt. Estimates are free. Call (833) 570-5807 for an exact number on your gate.
We Also Serve Cities Near Marco
Beyond Marco itself, our techs regularly run gate repair calls to Marco Island, Lely Resort, Verona Walk, and Lely. If you’re a few minutes inland or across the bridge, the salt air is less aggressive but the same failure patterns apply. Call us at (833) 570-5807 from anywhere in the 34146 area and we’ll get you scheduled.
Serving Marco, FL — Our Local Coverage Area
We’re based in the Marco area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Marco
Salt air attacks hinges asymmetrically. The seaward-facing hinge on your canal-front or Gulf-front gate will corrode and seize years before the inland hinge shows any wear, because the prevailing onshore breeze deposits salt on one side constantly. That seized hinge causes the gate to bind, which strains the operator, which eventually burns out the motor. Replacing the hinge with marine-grade stainless hardware and re-aligning the gate typically costs $180 – $420 per hinge in Marco. Call (833) 570-5807 and we’ll tell you if your motor survived the strain.
You can, but the sag is usually not the panel’s fault. In Marco, a sagging gate usually means a hinge post that has rotated in a shallow footing, or a seaward hinge that has seized and pulled the gate out of alignment. Replacing the panel without fixing the post or hinge means the new panel sags within months. We diagnose the root cause first, then quote you the real repair, usually $350 – $700 for post re-setting and re-hanging in Marco. Call (833) 570-5807 for an honest assessment.
Retrofitting the board is usually cheaper, typically $400 – $900 in Marco, versus $1,800 – $4,500 for a full operator replacement. But the honest answer depends on the motor and gearbox. If the motor is still sound, a new board with safety photocells and storm-ready logic buys you years more service. If the motor has been straining against a seized hinge for a year, the gearbox may be worn past saving. We will tell you which one you have, and we’ll show you the wear before you decide. Call (833) 570-5807 for a diagnosis you can trust.
Many do not. Gates installed in Marco before the mid-1990s often lack safety photocells, pinch-point guards, and the current-sensing reversal logic that UL 325 requires. That matters more on Marco because a gate that binds from salt corrosion can trip the entrapment sensors in an unsafe way. Retrofitting an older gate with modern safety sensors and a compliant control board typically runs $400 – $900. Call (833) 570-5807 and we’ll assess what your gate needs to be safe and compliant.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers virtually any operator you’re likely to own on Marco Island, from a legacy FAAC swing operator on a canal-front estate to a newer Mighty Mule on a pool-cage gate. Brand-agnostic means we stock parts across all of them and we recommend what your system actually needs. Call (833) 570-5807 and tell us what you have; we’ll tell you what it costs to fix.
Call Miami Gate Company for Gate Repair in Marco, FL
If your gate is binding, sagging, or the operator quit, call (833) 570-5807 for a free estimate. We’ll send a gate tech to your Marco property, diagnose the problem on site, and quote the repair before any work begins. No pressure, no replacement pitch, just an honest read on what’s wrong and what it costs to fix. We recently serviced a LiftMaster swing gate operator on a canal-front estate in the Hideaway Beach golf-course community, where the seaward hinge had completely seized from salt-air corrosion. Our tech replaced the hinge with marine-grade stainless hardware and retrofitted the obsolete control board with a storm-ready LiftMaster unit, restoring smooth operation without full gate replacement. That’s the kind of repair we do most. Call us and we’ll do the same for your gate.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Marco since day one.