Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Delray Beach
Gate repair in Delray Beach comes down to two very different jobs: the tight, older driveways east of the Intracoastal and the sprawling HOA-regulated communities out west. Miami Gate Company handles both. If your swing gate is sagging, your slide gate is grinding, or your operator quit responding, call (833) 570-5807 and we’ll diagnose it properly. Gates are all we do. That focus shows in how fast we find the actual fault, not just the obvious symptom.
Why Miami Gate Company Is Delray Beach’s Preferred Gate Repair Company
We work on virtually any gate system. Whatever brand you have, we know it. Our technicians train across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule competing platforms, so our recommendation is based on what your system needs, not what a single manufacturer pays us to push. That brand-agnostic approach matters in Delray Beach, where a tech often has to repair or match a gate to an HOA’s approved design rather than just swap in whatever is on the truck.
Ruben Castellano leads our crew, and he has built the company around one idea: a gate specialist should be able to open the control board, read the error codes, and tell you whether the fix is a $40 sensor or a replacement motor. Most handymen will not touch the motor, board, sensors, and wiring. That is exactly what we do every day.
Delray Beach customers call us because we treat the gate as a system, not a hinge and a panel. When a builder-grade operator in a western community stalls mid-swing, the cause is often not the motor at all. It is the missing power run that should have gone in during construction. We diagnose that. Then we fix it.
Styles & brands we work with
Driveway Gate Repair in Delray Beach
Driveway Gate Repair in Delray Beach usually means one of three things: an automatic gate that stopped opening, a manual gate that has sagged until it scrapes the pavers, or a builder-grade operator that never worked well from day one. In the western communities, that third scenario is the most common call we get. The builder ran a thin extension cord or undersized wire out to the gate, and the operator browns out every time it tries to move the panel.
Typical driveway gate repair in Delray Beach runs $180 to $420 for hinge replacement, realignment, or sensor work. A full operator replacement with proper wiring and a new post footing lands between $900 and $2,800 depending on the gate weight and whether we are pulling new conduit from the house. We quote every job before work starts, and the price does not change unless we uncover something and get your approval first.
Hinge and post repair on sagging gates
A gate that drags on the ground is usually not a panel problem. The hinge post was never set in enough concrete, or the hinge barrels have worn oval. We cut out the old post, pour a proper footing, and weld or bolt on new hinges sized for the gate’s actual weight.
Automation added to a manual gate
Plenty of Delray Beach homes east of the Intracoastal and west in the country clubs have a perfectly good ornamental aluminum gate that was hung manual. Adding an operator means reinforcing the post, running dedicated power, and choosing an operator that fits the gate’s swing geometry. We do that start to finish.
Gate Welding in Delray Beach
Gate Welding in Delray Beach is what saves a custom ornamental gate from the scrap pile. In the western HOA communities, you cannot always replace a damaged panel with whatever is in stock. The association often dictates exact style, color, and height. So we weld. We repair the split in the aluminum frame, rebuild the bent picket, and match the finish so the gate looks like it was never touched.
Weld and rust repair in Delray Beach typically runs $150 to $500 for localized frame repairs and $400 to $1,200 when we are cutting out and replacing a section of the gate. Salt-laden ocean air and year-round humidity mean powder-coated aluminum and steel gate frames corrode from the inside out. By the time a crack shows, the metal around it is usually thin. We cut back to solid metal before welding, so the repair does not fail again in six months.
Rust remediation on ornamental aluminum
Aluminum does not rust in the traditional sense, but the powder coat fails, then the raw aluminum oxidizes and pits. We grind that back, weld in fresh material, and re-coat the section to match. On older steel gates, we treat the rust, reinforce the frame, and seal it properly before painting.
Post footing and reinforcement welding
A gate that sags repeatedly has a structural problem, not a tightening problem. We weld reinforcing plates where the hinge brackets meet the post, and we set new posts with enough concrete to hold the gate’s weight plus the force of the operator. Then the geometry stays true.
Trusted Brands We Service in Delray Beach
We service the brands Delray Beach homes already have installed. DoorKing and Elite units are common on the older swing gates east of town. Ghost Controls and Mighty Mule show up regularly on smaller residential jobs and DIY retrofits that need a professional to make them right. Whatever brand you have, we know it. Our trucks carry the common boards, sensors, and remotes for those systems, which means less waiting on parts and faster turnaround for Delray Beach customers.
Common Gate Repair Problems We See in Delray Beach Homes
- Builder-grade operators with undersized power runs. In the western communities, we regularly see gates that were wired with 14-gauge landscape wire during the build. The operator pulls more amps than the wire can deliver, so it stalls mid-swing. We pull dedicated conduit and run proper gauge wire to the gate.
- Salt air eating hinges and motors. The subtropical coastal climate in Delray Beach means salt-laden air gets into every hinge barrel and motor housing. Steel hinges rust through within a few years. Motors corrode internally. We replace with sealed or galvanized hardware where it makes sense.
- Sagging panels from thin post footings. East-side bungalows in 33483 and the older downtown blocks often have gate posts set in a few inches of concrete. The gate leans, the operator fights the geometry, and something breaks. We reset posts with proper footings.
- HOA architectural review complications. Western country-club communities in 33445, 33446, and 33484 often require the gate to match an approved design exactly. A stock replacement panel is not an option. We repair and match what is there, and we coordinate with property managers on the specs.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Delray Beach, FL
Gate repair in Delray Beach costs different money depending on what failed. A hinge replacement with realignment runs $180 to $340. A control board replacement on a DoorKing or Elite operator is $350 to $700 installed. Welding and rust repair lands between $150 and $1,200. A full operator replacement with new conduit and post work starts around $900 and can run to $2,800 on a heavy swing gate. Every quote is written before work begins, and you approve the number before we touch a tool. Call (833) 570-5807 for a free estimate.
We Also Serve Cities Near Delray Beach
Our Gate Repair team works across southern Palm Beach County. We cover Kings Point, Highland Beach, Villages of Oriole, and Boynton Beach, plus the surrounding communities. If you are just outside Delray Beach proper, call and ask. We likely already have a truck nearby, and the same brand-agnostic diagnosis applies wherever the gate sits. For the full picture of our service area, see Gate Repair in Delray Beach.
Serving Delray Beach, FL — Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Delray Beach
Yes. We pull a dedicated circuit and conduit from your panel to the gate, install a proper post footing if needed, and set the operator up to run without browning out. This is one of the most common calls we get from homes in 33445, 33446, and 33484. The fix usually costs $700 to $1,800 depending on the trench distance. Call (833) 570-5807 and we’ll walk the run with you before quoting.
Yes, we do that regularly. We reinforce the hinge post, install the operator, run dedicated power, and set the safety sensors so the gate opens and closes correctly. The gate has to be structurally sound before we mount an operator, and if it is not, we repair that first. Expect $900 to $2,500 for a full automation retrofit.
We match what the HOA has on file. In the western Delray Beach communities, the association often dictates exact style, color, and height, and a stock panel will not pass review. We repair or fabricate to the approved design, and we can coordinate with your property manager on the specs. That is standard work for our team.
Because the post is moving, not the hinges. When a gate sags repeatedly, the post was set in too little concrete or the hinge brackets are bending under the gate’s weight. Tightening bolts does not fix a structural problem. We reset the post, reinforce the brackets, and the gate stays where we put it. Post reset work in Delray Beach typically runs $300 to $700.
Yes, they do. Salt-laden ocean air corrodes internals, and tropical downpours and storm-season wind put real stress on post anchors and motor housings. We see gates in Delray Beach that would last 15 years inland fail in half that time unless the hardware is sealed and the post footings are deep. Choosing corrosion-resistant hardware and doing proper maintenance extends the life of the system. Call (833) 570-5807 for an honest assessment of what your gate needs.
Contact Miami Gate Company for Gate Repair in Delray Beach
If your gate is stalling, sagging, or refusing to open, do not guess at the problem. Call (833) 570-5807 for a free estimate. We diagnose the motor, board, sensors, and wiring, not just the obvious parts. Ruben Castellano and the team at Miami Gate Company serve Delray Beach with brand-agnostic gate repair, and we show up knowing the difference between an east-side bungalow driveway and a western HOA community gate. You will get a written quote before any work starts.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Delray Beach and the surrounding area.