Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fountainebleau, FL
Gate installation in Fountainebleau means working with housing stock that was mostly built between the 1960s and 1980s. Most properties still have their original aluminum or steel driveway gates, and many are now failing at the hinges, operators, or posts. The combination of salt-laden humidity, hurricane-code retrofit requirements, and decades of sun exposure creates a repair and replacement workload you won’t find in newer Miami-Dade developments. Miami Gate Company has served Fountainebleau since 2012, and we handle everything from component-level electric gate diagnosis to full replacement installs. Call (833) 570-5807 for a free estimate.
Why Fountainebleau Homes Are Different
Fountainebleau’s dense mid-century tract housing and multifamily complexes mean most gates are original units installed in the 1970s and 1980s. That’s 40 to 50 years of subtropical exposure. The 33172 ZIP sits close enough to the coast that salt air accelerates rust on steel gates, while intense sun and heavy seasonal rain warp wooden ones and corrode aluminum hardware. We regularly see gate operators along the 33172 corridor trip on moisture-sensitive limit switches after a heavy summer downpour, a call pattern that’s specific to this area’s aging stock. Original 1970s aluminum gates also tend to have mismatched replacement hinges that bind, because parts were swapped piecemeal over the decades rather than as a matched set.
The housing stock here is predominantly ranch-style single-family homes and low-rise condo or townhome complexes. That means a mix of driveway swing gates, sliding gates, and pedestrian gates, many of which were never retrofitted for current wind-load standards. Hurricane season drives demand for reinforced posts and wind-rated operators, especially on properties where the original gate was installed before Miami-Dade’s stricter code updates. We factor those requirements into every Fountainebleau job rather than treating them as an afterthought.
Styles & brands we work with
Our Main Fountainebleau Services
Most Fountainebleau homeowners call us for one of two reasons: a gate that has stopped moving, or an electric gate that moves when it shouldn’t. Both services are covered below, each with its own dedicated page for deeper detail.
Gate Repair in Fountainebleau
Gate repair in Fountainebleau usually starts with a hinge or post issue on an original 1970s or 1980s gate. We see steel gates with rust-through at the lower rail, aluminum gates with stress cracks at the weld points, and posts that have shifted out of plumb after years of wet-season soil movement. The repair work means realigning the gate, replacing worn hardware with matched components, and reinforcing posts where the original footing has degraded. For a full breakdown of what we repair and what it costs, see our dedicated Gate Repair in Fountainebleau page.
Electric Gate Repair in Fountainebleau
Electric gate problems in Fountainebleau tend to cluster around moisture. After a heavy rain, we get calls about operators that hum but don’t move, remotes that work intermittently, and safety sensors that trigger for no visible reason. We diagnose the motor, control board, sensors, and wiring rather than swapping parts on a guess. Most of these systems are older DoorKing, Elite, or Mighty Mule units that can still be serviced if the diagnosis is done at the component level. Read more on our Electric Gate Repair in Fountainebleau page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Fountainebleau
New gate installation in Fountainebleau means replacing equipment that has reached the end of its service life, often after 40-plus years of salt air and storm cycles. We regularly remove original 1970s aluminum gates that have corroded at the hinge mounts or snapped at the post, and replace them with current-code wind-rated systems matched to the property’s setback and driveway slope. The work usually includes new posts, new hinges, a modern operator, and safety sensors that meet Miami-Dade requirements. For the full scope of what we offer, see our Gate Installation service hub.
Automatic Gate Installation
Signs you need it
Your existing gate is manual, or the old operator is dead and the gate is being pushed open by hand.
What it costs in Fountainebleau
Automatic gate installation with a new operator typically runs $2,500 to $6,500 in Fountainebleau, depending on gate size and operator type.
How we do it
We set new posts, mount the gate and operator, run the power and control wiring, install safety sensors, and program remotes and keypads before testing the full cycle.
Driveway Gate Installation
Signs you need it
Your current driveway gate is sagging, binding, or corroded through at the rails, and repairs would cost more than replacement.
What it costs in Fountainebleau
A new sliding or swing driveway gate in Fountainebleau typically falls between $1,800 and $3,400 for the gate itself, before the operator.
How we do it
We measure the driveway opening, confirm the swing or slide path, pour reinforced post footings, and hang the new gate on galvanized or stainless hardware.
Sliding Gate Installation
Signs you need it
Your driveway slopes upward from the street or swings into a space that can’t accommodate a swing gate.
What it costs in Fountainebleau
Sliding gate installation in Fountainebleau usually runs $3,100 to $6,500 including the gate, track, and operator.
How we do it
We install the track and roller system, set the gate, mount a linear operator, and wire the safety loop and photo-eye sensors before programming the travel limits.
What Gate Installation Costs in Fountainebleau
| Item | Typical range in Fountainebleau |
|---|---|
| Basic steel or aluminum driveway gate | $1,800 – $3,400 |
| Automatic operator with safety sensors | $2,500 – $6,500 |
| Sliding gate with track and operator | $3,100 – $6,500 |
Do I need a permit for a new gate in Fountainebleau?
Most new gate installations in Fountainebleau require a permit, especially when posts are set in concrete or the gate is automatic. Miami-Dade wind-load codes apply. We handle the permit drawings and submittal as part of the installation, so you don’t have to deal with the county directly.
How long does a gate installation take in Fountainebleau?
A standard driveway gate replacement in Fountainebleau is usually completed in one to two days once the gate and operator arrive. Custom sliding gates take longer because the track and posts need more site work. We’ll give you a firm schedule when you call (833) 570-5807.
Brands We Service in Fountainebleau
We work on Gate systems from Ghost Controls, DoorKing, Elite, and Mighty Mule, among others. Because we service multiple brands rather than repping one manufacturer, we stock common boards, remotes, and sensors for the units most common in Fountainebleau’s 1970s and 1980s complexes, which keeps turnaround tighter than waiting on a single-brand dealer. Learn more about our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fountainebleau, FL
| Service | Typical range in Fountainebleau |
|---|---|
| Gate repair diagnostic | $75 – $150 |
| Hinge or post repair | $250 – $650 |
| Electric gate operator repair | $350 – $900 |
| Control board replacement | $400 – $1,100 |
| Safety sensor replacement | $175 – $350 |
| Basic driveway gate | $1,800 – $3,400 |
| Automatic operator with sensors | $2,500 – $6,500 |
| Sliding gate with track and operator | $3,100 – $6,500 |
| Gate removal and disposal | $150 – $400 |
Prices in Fountainebleau run slightly higher than inland Miami-Dade because of the salt-air corrosion work and the wind-load retrofits many of these older properties need. Whatever the number, we quote it before any work starts, and that price doesn’t change unless we find something structural you haven’t approved.
Neighborhoods We Serve in Fountainebleau
We cover all of Fountainebleau, including the condo and townhome clusters along Fontainebleau Boulevard and the single-family streets west of the Turnpike. Response for a typical gate repair in the 33172 ZIP is usually same-day or next-day depending on our schedule, and we keep parts for the most common Fountainebleau operator models on our trucks.
- Fontainebleau Park
- Sweetwater/Fountainebleau corridor
- West Fontainebleau
- Fountainebleau Estates
- University Park side of 33172
Service Area – Cities Near Fountainebleau
Beyond Fountainebleau, we run regular routes through Sweetwater, FL, University Park, FL, and the surrounding Miami-Dade neighborhoods. We also cover Olympia Heights, FL and Westwood Lake, FL for gate repair and installation, which keeps our scheduling predictable and our parts stocked for the whole area.
Serving Fountainebleau, FL — Our Local Coverage Area
We’re based in the Fountainebleau area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fountainebleau
For most gate repairs in Fountainebleau we can be on site the same day or the next business day, depending on call volume. Electric gate issues that leave a driveway open or a pedestrian gate swinging free get priority. Call (833) 570-5807 and we’ll give you a straight arrival window.
Many of the condo and townhome associations in Fountainebleau do have architectural guidelines covering gate height, material, and color, and some specify operator types. We work with your HOA’s requirements and can produce the documents or drawings they ask for as part of the job.
We cover all of the 33172 ZIP and the surrounding area, including Sweetwater, University Park, Olympia Heights, and Westwood Lake. If you’re within 15 to 20 minutes of Fountainebleau, we can almost certainly get to you on a normal repair route without a long scheduling delay.
If your gate is sagging, stuck, or tripping its operator, call (833) 570-5807 for a free estimate. We quote the price before any work begins, and we know the Fountainebleau housing stock well enough to tell you what’s worth repairing and what’s past saving.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fountainebleau Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Javier Mendoza"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Ramon Salazar"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Bryant