Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Naples Park
When an electric gate stops working in Naples Park, it’s rarely a small inconvenience. It’s a security gap on a rental property, a blocked driveway on Vanderbilt Beach Road, or a safety hazard around a pool enclosure. We’re Miami Gate Company, and we repair electric gates throughout the 34108 ZIP, from the ranch homes off 91st Avenue to the condos near the Gulf. Our technicians know these streets, the salt air that eats hinges, and the older operators still running on legacy control boards. Call (833) 570-5807 for a repair quote, and we’ll give you a straight answer on what’s wrong and what it costs before any work starts.
Why Miami Gate Company Is Naples Park’s Preferred Electric Gate Repair Company
We work on gates all day, every day. That’s not a tagline. It’s what separates us from a handyman who patches a hinge and calls it fixed. Electric gate repair is our core trade, and we handle the component-level work most contractors won’t touch: motors, control boards, safety loops, photocells, keypads, and wiring. When a Naples Park homeowner calls us about a gate that won’t budge, we don’t guess. We open the operator housing and trace the failure.
The Naples Park housing stock shapes what we see. Most homes here were built between the 1950s and 1980s, and many still run the original gate or an early retrofit. We know the LiftMaster and FAAC boards from that era, including the ones no longer manufactured. Ruben Castellano, who leads our team, has trained our technicians to diagnose older systems without wasting a customer’s money on parts the gate doesn’t need. That brand-agnostic approach matters here, because Naples Park gates are too diverse for a one-brand fix.
Styles & brands we work with





Automatic Gate Repair in Naples Park
Automatic gate repair in Naples Park usually involves one of three systems: a single-panel driveway swing gate, a pool-enclosure gate with a magnetic lock, or a side-yard privacy gate running on a smaller operator like Mighty Mule or Ghost Controls. These gates live close to the Gulf, which means the operator has been breathing salt air since the day it was installed. We find corrosion inside motor housings, on limit switches, and across control board terminals. The repair starts with an honest diagnosis, then a written price before we turn a single screw.
Operators, Boards, and Safety Sensors
When a gate stops mid-cycle or won’t respond to a remote, the fault is usually in the control board or the safety sensor loop. On older Naples Park systems, we often see obsolescent boards that have simply given out after years of humidity and power surges. We replace them with current boards, wire in new photocells where the old ones are faded or misaligned, and test the full cycle before we leave.
Remote and Keypad Programming
Naples Park has a lot of vacation rentals, which means keypads get used by dozens of guests a year, and remotes get lost in the sand. We reprogram remotes, replace entry codes, and set up temporary codes for renters. If a property manager needs a gate locked down between tenants, we handle that too, and we explain to the owner exactly how the system was configured and why.
Electric Gate Motor in Naples Park
An electric gate motor in Naples Park carries more load than most people realize. The gate has to fight salt buildup on the hinges, sand that drifts into the track, and a post that may have shifted in the sandy soil after a storm. By the time a homeowner notices the gate moving slower or groaning on every cycle, the motor has often been overworking for months. Our job is to figure out whether the motor can be saved or whether the smarter money goes into a new operator with a higher duty rating.
When to Repair vs. Replace the Motor
We tell Naples Park customers the truth: if the motor armature is fried and the board is also dead, rebuilding that operator often costs more than a new one. A typical motor replacement here runs $600 to $1,400 depending on the gate’s weight, the operator brand, and whether we need to refit the mounting plate. A board-only repair usually lands between $250 and $500. A seized hinge that burned out the motor has to be corrected first, or the new motor will fail the same way.
Solar and Battery-Assisted Operators
Some Naples Park gates run on solar-charged battery operators, especially where the driveway was poured decades ago and nobody trenched power out to the gate. These systems fail differently. A dead battery is the most common culprit, and it’s often a five-minute phone diagnostic for us, not an automatic service call. When an out-of-state owner calls us because a renter can’t get in the driveway, we walk through the battery check before we send a tech across Alligator Alley.
Trusted Brands We Service in Naples Park
We service DoorKing, Elite, Ghost Controls, Mighty Mule, and the LiftMaster and FAAC systems that still dominate Naples Park’s older homes. We carry common boards, remotes, photocells, and hinge hardware, so most repairs don’t wait on a parts shipment. Because we’re not tied to one manufacturer, we give you the fix that makes sense for the system you already own, not the one a dealer happens to sell. That matters when you’re deciding between a retrofit and a replacement. Our Electric Gate Repair team sees more of these legacy systems in a month than most companies see in a year.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Naples Park Homes
- Seized or sagging hinge posts: Salt spray from the Gulf works its way into hinge bearings, and the post itself often rots at the base. The gate sags, the motor strains, and eventually the operator fails. We replace the post footing and switch to corrosion-resistant hinges.
- Obsolete control boards on legacy operators: The LiftMaster and FAAC boards in older Naples Park gates were not built for decades of salt-laden humidity. When they fail, the gate often locks in place. We replace them with modern boards and hard-wire surge protection where needed.
- Photocell faults from post shifts: Sandy soil in Naples Park moves after heavy rain and named storms, which knocks safety photocells out of alignment. The gate refuses to close or reverses constantly. We reset the post or shim the photocell mounts so the safety loop reads clean.
- Keypad and remote failures on rental properties: Seasonal renters enter codes wrong, lose remotes, or leave the gate on manual override. We reprogram systems, replace damaged keypads, and set up rental-friendly temporary codes that reset automatically.
Pricing for Electric Gate Repair in Naples Park, FL
What does electric gate repair cost in Naples Park? A service call and diagnosis typically runs $75 to $150, and we credit that toward the repair if you approve the work. Control board replacement lands between $250 and $500. A new motor or swing arm operator generally runs $600 to $1,400 installed. Post or hinge work adds $200 to $600 depending on how much concrete work the footing needs. These are real ranges for the Naples Park market, not placeholder numbers. We quote the full price before any work starts, and you agree to it first. No open-ended hourly billing.
We Also Serve Cities Near Naples Park
Our Naples Park work keeps us across the neighboring communities too. We handle Electric Gate Repair in Naples Park and the surrounding streets, and we also run service to Pelican Bay, Island Walk, Naples, and Golden Gate. If your property sits a little outside the 34108 line, call us and we’ll confirm coverage. (833) 570-5807.
Serving Naples Park, FL — Our Local Coverage Area
We’re based in the Naples Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Naples Park
Yes, and we do this regularly for seasonal rental owners. We ask a few questions over the phone: Is the operator making noise? Is there power at the outlet? Is the keypad lit? Often a stuck-open gate is a dead battery in a solar opener, a tripped GFCI breaker, or a renter who switched the gate to manual. We can identify the problem before dispatching a tech, which saves you a wasted trip charge. If it needs hands-on repair, we schedule it and send photos and a written quote before any work begins. Call (833) 570-5807 for a remote assessment.
Salt air corrodes terminals, rusts hinge bearings, and eats away at the powder coating on the operator housing in just a few seasons. We see control boards with green corrosion across the solder joints and motors with pitted armatures from the humid, saline environment. The fix usually means replacing fasteners with stainless or marine-grade hardware, sealing the board housing properly, and sometimes upgrading to an operator built for coastal use.
Sometimes, but not always. If the hinge itself is worn, replacing it is straightforward. If the post has shifted in the sandy soil or rotted at the base, new hinges won’t fix the root cause. We inspect the post footing and the gate’s alignment before recommending anything. Replacing hinges without correcting the post is a short-term fix that will eventually destroy the operator motor. Call us for an on-site evaluation, and we’ll tell you what’s actually needed.
We do. Older FAAC and LiftMaster operators are common in Naples Park, and we still service and repair them. Some of these pre-safety-standard systems lack photocells or proper reverse sensitivity, and we always discuss what should be retrofitted for safety. If a board is no longer manufactured, we source compatible replacements or repurpose the existing wiring with a modern operator so you keep the gate and posts but get a current drive system.
Two things usually happen after a named storm in Naples Park. First, saturated sandy soil lets the gate post shift, which binds the gate and triggers the safety photocell. Second, a power surge or nearby lightning strike fries the control board. We inspect both when we arrive, because the gate may look perfectly fine while the board is dead. If your gate won’t open after a storm, call (833) 570-5807 and we’ll get you on the schedule quickly.
For a free estimate on any electric gate repair in Naples Park, call Ruben Castellano and the team at Miami Gate Company at (833) 570-5807. We’ll diagnose the problem, quote a firm price, and get your gate working again, whether it’s a rental property near Vanderbilt Beach Road or a permanent home farther inland along 91st Avenue.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Naples Park and the surrounding Gulf Coast communities.