Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Melbourne
Electric gate repair in Melbourne, FL usually costs $180 – $460 for a component-level fix, and most jobs are done in a single visit. We’re Miami Gate Company, a gate-only specialist that works on both residential driveway gates in newer subdivisions and older commercial slide gates along US-1. If your gate is dead, intermittent, or refusing to close, call (833) 570-5807 and we’ll get a technician to your Melbourne property with the right parts on the truck.
Salt air does a number on gate hardware here. We see it every week, from June Park to the downtown grid around 32901. That’s why we approach every repair in Brevard County with the assumption that corrosion is somewhere in the equation, even when the symptom looks electrical.
Why Miami Gate Company Is Melbourne’s Preferred Electric Gate Repair Company
We built our reputation in Florida by being the company that actually fixes the gate, not the company that quotes a full replacement at the first sign of trouble. Melbourne property owners call us because we’re brand-agnostic. That means we diagnose what your system actually needs, whether it’s a rebuilt control board, a new limit switch, or a safety sensor retrofit. We’re not tied to one manufacturer and we’re not here to sell you a LiftMaster if a FAAC part will do the job for less.
Our lead technician, Ruben Castellano, has spent years working on the exact brands Melbourne homes and businesses run: LiftMaster, FAAC, BFT, DoorKing, Mighty Mule, Ghost Controls, Elite, Linear, and Viking. When we show up to an Electric Gate Repair call in Melbourne, we’re not guessing. We’ve opened hundreds of these control boxes and we know the failure patterns by brand and by climate.
We also understand Melbourne’s local building picture. Mid-century ranch homes in neighborhoods near Florida Avenue tend to have gates that predate UL 325 entrapment requirements. Newer HOA communities in 32940 and 32904 have monitored gates with stricter compliance needs. Both get the same focused diagnosis from us. The difference is what we find when we open the panel.
Styles & brands we work with
Commercial Gate Operator in Melbourne
Commercial gate operator service in Melbourne means working on slide gates, barrier arms, and industrial swing gates that see hundreds of cycles a day at apartment complexes, business parks, and gated communities across the 32912 and 32934 ZIP codes. When a commercial operator fails, it’s rarely just the motor. It’s usually the control board, a damaged loop detector, or a limit switch that got salted and stopped reading position correctly.
We repair commercial operators at the component level. That means testing the motor, on-board diagnostics, safety loops, photo-eyes, and the physical gate hardware. A commercial operator rebuild in Melbourne runs $400 – $900, depending on what’s failed and whether we’re retrofitting older equipment for UL 325 compliance. Full operator replacement on a commercial system typically starts around $1,800 and goes up based on gate size, duty cycle, and whether we’re reusing the existing gate structure.
Loop Detector and Safety Edge Repairs
Most commercial gates in Melbourne rely on in-ground induction loops to detect vehicle presence. When those loops crack from years of heat and moisture intrusion, the gate loses its vehicle-detection signal and either won’t open or won’t hold open. We cut, splice, and test loop systems rather than telling you the gate needs replacing. Same with safety edges; if the pressure edge is cracked or peeling from sun exposure, we replace the edge profile and re-terminate the wiring.
Slide Gate Track and Roller Service
Commercial slide gates along US-1 and other Melbourne corridors collect sand and salt residue in the track, which wears rollers and creates extra load on the operator. A gate that’s hard to push is a gate that’s about to kill a motor. We clean, realign, and lubricate slide tracks, and replace worn rollers and guide wheels before the strain destroys an otherwise healthy operator.
Gate Opener Repair in Melbourne
Gate opener repair in Melbourne is the most common call we take. The opener, or operator, is the motorized brain that moves the gate. When it fails, it’s usually one of four things: a failed control board, a dead capacitor, stripped gears, or bad limit switches. We diagnose all of it on-site. A typical gate opener repair in Melbourne runs $190 – $420, and that includes the part and labor for most residential swing operators.
Older Melbourne homes in zip codes like 32935 often still run the original opener that came with the house in the 1990s or early 2000s. Those older LiftMaster and FAAC units are workhorses, but their boards fail after years of exposure to humid, salt-heavy air. We carry retrofit boards and universal receivers that can bring an old opener back to life without ripping out the whole system.
Control Board Replacement and Repair
A control board that’s been lived in by salt air corrodes at the relay points and solder joints. Intermittent operation, clicking but no movement, or a gate that only works from one remote all point to the board. We test boards before recommending replacement. When a board is beyond repair, we install a new or rebuilt unit that matches your existing operator, and we verify every input and output before we leave.
Keypad, Remote, and Receiver Fixes
Sometimes the opener is fine and the problem is the keypad that hasn’t worked since the last big storm, or a receiver that’s lost its programming. We replace wired and wireless keypads, program remotes, and upgrade older single-frequency receivers to rolling-code units that aren’t vulnerable to code grabbing. This is the cheapest repair we do, and it fixes more Melbourne gate complaints than you’d expect.
Trusted Brands We Service in Melbourne
We’re trained on all major gate and operator brands, but the Melbourne market skews heavily toward LiftMaster and FAAC on the residential side, and DoorKing and BFT on commercial properties. We also regularly service Ghost Controls in Melbourne, plus Elite and Mighty Mule systems that came as DIY or builder-installed setups. We keep common control boards, limit switches, remote receivers, and safety edges stocked for these brands so we can complete most Melbourne repairs in one trip. We never push a brand change just because we don’t carry a part; if your system runs, we fix it.
Common Electric Gate Repair Problems We See in Melbourne Homes
- Pitting corrosion on older gates – In downtown Melbourne (32901) and the older neighborhoods around it, original 1960s and 1970s wrought-iron gates have spent decades absorbing salt from the Indian River and Atlantic. The rust doesn’t just sit on the surface; it pits the frame internally and weakens the metal from the inside out. Before we even talk about replacing an operator, we evaluate whether the gate itself is structurally sound enough to hold a new one.
- Control board failures from salt air – We open panels on Melbourne gates and find green-tinted circuit boards with corroded terminals. This is the single most common failure on older LiftMaster and FAAC units near the coast. The salt in the air condenses inside the operator housing and attacks the board over years until something shorts or stops passing current.
- Sagging gates from hurricane wind loads – Storm-force winds don’t just blow debris into gates. They flex the gate frame and wear the hinge posts, especially on older swing gates. A gate that’s sagging a half inch strains the operator on every cycle, which is why we see a cluster of operator failures in the months after a bad hurricane season.
- Missing UL 325 entrapment protection – Melbourne homes built before the 2000s often have gates and operators that predate current entrapment safety standards. That means no photo-eyes, no edge sensors, and a serious safety liability if a child or pet is caught. We retrofit these systems to current safety requirements, and it should be a priority, not an afterthought.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Melbourne, FL
Here’s what Melbourne homeowners and property managers can expect from us, in plain numbers. Gate opener repair: $190 – $420. Commercial operator troubleshooting and component repair: $400 – $900. Control board replacement: $220 – $480 installed. Keypad or remote receiver replacement: $120 – $260. Safety sensor retrofit, including photo-eyes and wiring: $280 – $650, depending on how much corroded wiring we’re chasing. Full operator replacement on a residential swing gate: $950 – $2,400. Full commercial slide operator replacement: $1,800 and up.
You get a written, agreed price before we do any work. No invoice surprises. Call (833) 570-5807 and describe what your gate is doing (or not doing) and we’ll give you a ballpark over the phone. The on-site estimate is free. If we can’t safely get to your gate the same day you call, we’ll schedule you for the next available window and hold it.
We Also Serve Cities Near Melbourne
Our Melbourne team covers the full Brevard coastal corridor around the clock for gate emergencies. That includes West Melbourne, June Park, Indialantic, and Palm Bay, along with the unincorporated pockets between them. If you own a gate anywhere in this part of Brevard County, you’re in our normal service area. Read more about our Electric Gate Repair in Melbourne coverage, or call (833) 570-5807 to confirm we can reach your address today.
Serving Melbourne, FL — Our Local Coverage Area
We’re based in the Melbourne area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Melbourne
It can usually be repaired, but only after a proper evaluation. Pitting corrosion on a 1970s gate frame in Melbourne’s older neighborhoods like 32901 is common because of decades of salt air exposure. The key question is whether the pitting has compromised the structural thickness of the gate members. In many cases, we treat the rust, grind back the affected areas, seal and reinforce, and the gate is fine to keep. If the frame is too thin to safely hold the weight of an operator, replacement is the honest answer. We won’t replace a gate that can be saved, and we won’t repair a gate that can’t.
Older Melbourne gates, especially those installed before roughly 2001, often lack the UL 325 entrapment protection that’s now the minimum standard. That means they have no photo-eyes, no reversing edge, and no secondary entrapment sensor. We can retrofit these systems with current-sensing monitoring, photo-eyes, and contact edges that bring an older gate up to standard without replacing the operator itself. This is a specialty of ours, and it’s a repair that protects you legally as well as physically. Call (833) 570-5807 to schedule a safety evaluation.
Salt air in Melbourne accelerates corrosion on control board contacts, limit switches, and motor windings. That means operators here fail faster than identical units in inland Florida cities like Orlando. We routinely see Melbourne panels with green corrosion on the board terminals, which causes intermittent operation long before the operator fully dies. Sealing the panel, adding corrosion-resistant connectors, and replacing the failed components can restore the operator. It’s a repair-first approach that works well in the Melbourne climate.
Yes. We work on FAAC and BFT commercial slide operators regularly throughout Melbourne, from apartment complexes in 32912 to industrial lots in 32934. We carry parts for both brands, including limit switches, hydraulic components on FAAC 400-series operators, and BFT control boards. We also service DoorKing and LiftMaster commercial units. If your FAAC slide gate is dead, call (833) 570-5807 and we’ll tell you what we’re likely looking at before we arrive.
The likely cause in Melbourne is worn hinge posts, especially on older swing gates that have been through multiple hurricane seasons. Wind loads fatigue the welds where the hinge meets the post, and the gate starts dropping. That extra friction makes the operator work harder, which leads to overheating, stripped gears, and eventually a dead motor. We fix the sag first, typically by re-welding or reinforcing the hinge post and correcting the gate alignment, then we address the operator. Fixing the gate without addressing the sag just destroys another operator.
Call Miami Gate Company for Electric Gate Repair in Melbourne
We repair gates the right way: diagnose the component, fix what failed, and leave the gate safe. That’s true whether we’re working on a 1970s swing gate near downtown Melbourne or a commercial slide gate in West Melbourne. We carry parts for the brands Melbourne actually uses, we quote before we work, and we’re not done until the gate opens and closes under its own power, safely, every time.
Call (833) 570-5807 for a free estimate, or to schedule an Electric Gate Repair visit in Melbourne. We work with homeowners, HOAs, and property managers throughout Brevard County. If your gate is down, stuck open, or refusing to close, call now. We’ll get it sorted.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Melbourne and Brevard County with gate-only repair and installation.