Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Lauderdale-by-the-Sea
Electric gate repair in Lauderdale-by-the-Sea typically runs $180 – $650 depending on whether we’re replacing a control board, a motor capacitor, or a full operator. Most jobs in the 33303 zip code are diagnosed and fixed in one visit. If your gate stopped opening, is grinding, or reversed into your car last week, call us at (833) 570-5807. We work on virtually any gate system, and we know the salt-air failures this beachside town throws at gate hardware better than anyone inland.
We’re Miami Gate Company, and gates are all we do. From El Mar Drive to Commercial Boulevard, we’ve repaired swing gates, slide gates, and barrier arms across Lauderdale-by-the-Sea for years. The ocean is never more than a couple blocks from any property here, and that changes everything about how a gate motor wears, how hinges corrode, and what repairs actually last.
Why Miami Gate Company Is Lauderdale-by-the-Sea’s Preferred Electric Gate Repair Company
Lauderdale-by-the-Sea homeowners and condo associations call us for one reason: we diagnose at the component level instead of swapping parts until something works. A gate that won’t open could be a bad loop detector, a corroded terminal on the control board, a failed capacitor, or a limit switch that’s drifted. Our technicians are trained across nine major gate and operator brands including LiftMaster, FAAC, BFT, DoorKing, and Mighty Mule, so we find the actual fault the first time, not the third.
We also understand what this specific barrier island does to gate equipment. The salt spray here is relentless. A galvanized hinge that lasts 12 years in Fort Lauderdale can seize in 4 years two blocks from the beach. We stock marine-grade stainless hardware for Lauderdale-by-the-Sea jobs specifically because standard zinc-plated parts fail too fast to stand behind. That’s not a sales pitch. It’s what the environment demands.
When you call, you speak to a real person who can tell you whether the problem sounds like a board issue, a motor issue, or a safety sensor issue before we ever roll a truck. And our response time to Lauderdale-by-the-Sea is fast, because it has to be. A broken gate on a beach cottage is one thing. A broken gate on a custom courtyard property with a car trapped inside is another.
Styles & brands we work with





Electric Gate Motor in Lauderdale-by-the-Sea
Electric Gate Motor repair in Lauderdale-by-the-Sea means pulling the operator cover and finding out whether the motor itself burned out, or whether the control board, capacitor, or transformer failed first. In our experience across Lauderdale-by-the-Sea, motor failures here are almost always tied to two local culprits: salt corrosion on electrical connections, and moisture intrusion from storm surge or humidity. A typical motor replacement for a swing gate operator in Lauderdale-by-the-Sea runs $350 – $650, while slide gate motor replacements range $400 – $700 depending on weight rating and duty cycle. A capacitor or limit switch fix is often under $200.
Underground and High-End Operator Work
Several condominium and townhome developments along the Intracoastal side of Lauderdale-by-the-Sea use underground operators for their custom ornamental gates. These are heavy, buried units that require precision alignment and sealed wiring connections. We rebuild these on site where possible, and we’re one of the few companies in Broward that will even open one up without first recommending a complete replacement.
What Actually Kills a Motor Here
It’s rarely the motor windings. It’s the corrosion on the capacitor leads, the moisture in the terminal block, or a safety edge that’s been waterlogged since the last hurricane. Our electric gate repair team traces the whole circuit before quoting anything, so you don’t pay for a motor when a $40 relay is the real problem.
Gate Access Control in Lauderdale-by-the-Sea
Gate Access Control in Lauderdale-by-the-Sea covers the electronics that decide who gets in: keypads, telephone entry systems, proximity readers, and the control boards that tie them to the operator. For a condo building or a private residence with courtyard gates, these systems take a beating from salt air. Keypad membranes crack and corrode, reader contacts oxidize, and control board traces lift. A keypad replacement in Lauderdale-by-the-Sea typically runs $150 – $350 installed. A full telephone entry retrofit for a multi-tenant building runs $1,200 – $2,400 depending on the number of units and whether wiring needs to be re-run.
Keyless Entry That Survives the Beach
We recommend sealed, weather-rated keypads and readers for any property within sight of the ocean. The standard residential keypad sold at big-box stores won’t last two years at Lauderdale-by-the-Sea’s humidity and salt levels. We install commercial-grade units that are potted and gasketed, and we program them on site.
Integration with Cameras and Intercoms
A lot of our Lauderdale-by-the-Sea custom gate projects include matched intercom and camera entry systems. If your gate access control needs to talk to a video doorbell or a guard call box, we handle the low-voltage wiring and relay integration as part of the same visit. You don’t need an electrician, a gate company, and an IT person. You need one crew that understands the full circuit from the button to the motor.
Trusted Brands We Service in Lauderdale-by-the-Sea
We stock parts for DoorKing, Ghost Controls, Elite, and Mighty Mule systems for Lauderdale-by-the-Sea customers, and we’re trained on the full range of LiftMaster, FAAC, BFT, Linear, and Viking operators too. Being brand-agnostic means we fix what you have. If your DoorKing slide operator died and a competitor tells you to rip it out and buy a different brand, they’re solving their inventory problem, not your gate problem. We carry compatible boards, remotes, and safety sensors for the brands most common along the beach, so turnaround on most repairs is measured in days, not weeks.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Lauderdale-by-the-Sea Homes
- Seized swing gate hinges from salt corrosion. The original builders of many mid-century beach cottages used galvanized hinges that were never meant for an oceanfront environment. After 20 years of salt spray, the gate binds and the opener burns out fighting the resistance. We replace the hardware with marine-grade stainless, then re-test the operator load.
- Submerged slide gate motors after storm surge. Ground-level operators on narrow lots off El Mar Drive and along the Intracoastal flood during king tides and hurricanes. When the motor housing takes on saltwater, the windings short and the control board often goes with it. We can usually salvage the rack and guides and replace only the operator.
- Sagging custom gates between closely spaced buildings. With lots as narrow as 25 feet in some parts of town, many gates are custom-fitted between walls with no room for error. When hinge posts deteriorate from constant salt spray, the gate sags, scrapes the drive, and trips the obstruction sensor. That’s a post-footing repair, not a hinge adjustment.
- Phantom open and close cycles from corroded loop detectors. Underground loop detectors near driveways soak up groundwater and salt. We see detectors that fail intermittently, causing the gate to open or close at random, especially after heavy rain. A new loop and detector typically resolves it in a single visit.
Pricing for Electric Gate Repair in Lauderdale-by-the-Sea, FL
Here’s what Lauderdale-by-the-Sea homeowners should expect. A service call for diagnosis runs $75 – $125, waived if you proceed with the repair. Control board replacement: $250 – $500. Remote and receiver programming: $80 – $150. Safety sensor replacement: $120 – $250. Full swing gate operator replacement: $350 – $650. Full slide gate operator replacement: $400 – $700. Underground operator rebuild: $1,000 – $2,500 depending on the unit. The price is quoted and agreed before any work starts, and we walk you through every line item. Call (833) 570-5807 for a free estimate on your specific gate.
We Also Serve Cities Near Lauderdale-by-the-Sea
Our Electric Gate Repair team serves the entire coastal corridor. In addition to Lauderdale-by-the-Sea, we regularly work in Terra Mar, North Andrews Gardens, Oakland Park, and Wilton Manors. If your property sits on the border of any of these areas, call us and we’ll confirm coverage before you schedule anything.
Serving Lauderdale-by-the-Sea, FL — Our Local Coverage Area
We’re based in the Lauderdale-by-the-Sea area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Lauderdale-by-the-Sea
Salt air corrodes the electrical connections, capacitor leads, and terminal blocks inside your operator, and it eats through standard zinc-plated keypad contacts within a few years. In Lauderdale-by-the-Sea, we see control boards fail from corrosion long before they fail from age. The fix is using marine-grade stainless hardware and sealed, weather-rated access control components, and we stock both for this market specifically. Call (833) 570-5807 if your gate is acting erratically and you suspect corrosion.
Yes. Nearly all of Lauderdale-by-the-Sea sits in a coastal high-velocity hurricane zone, which means any gate replacement or major structural repair must comply with Florida Building Code wind-load requirements. That typically requires engineered brackets, through-bolted hinge posts, and stainless or aluminum hardware rated for saltwater exposure. We handle the compliance side as part of every gate project here, so you don’t end up with an inspector’s rejection letter. Call (833) 570-5807 to schedule a wind-load assessment if you’re planning a replacement.
In most cases, yes. What looks like a bent gate is usually a hinge post that has deteriorated at the footing from years of salt spray, especially in the tight alley conditions off El Mar Drive. We excavate and re-set the post footing, replace the hinge hardware with stainless, and re-hang the gate to proper clearance. The ornamental panel itself rarely needs replacement. Call (833) 570-5807 and we’ll tell you after a site visit whether it’s a footing issue or something else.
For a narrow, short-driveway gate on a beach lot, an articulated arm swing operator or a compact slide operator with a high-torque motor usually fits best. We avoid operators that need long, flat runs for chain drive when there’s no room. Every narrow-lot install in Lauderdale-by-the-Sea gets measured for setback, wind load, and pedestrian entrapment zones before we recommend a specific unit. Call (833) 570-5807 for a free on-site recommendation.
Elevate the operator and control board above the expected flood elevation, mount the battery backup on a raised bracket, and keep all wiring connections in sealed junction boxes. For ground-level slide gate operators in Lauderdale-by-the-Sea, we install raised pads and sealed motor housings where the site allows. If your gate has been submerged before, we can assess what needs to be raised or replaced before the next storm. Call (833) 570-5807 to schedule a pre-season inspection.
If your electric gate is down in Lauderdale-by-the-Sea, don’t wait for the next storm or the next burglary attempt. Call Miami Gate Company at (833) 570-5807 for a free estimate on repair, replacement, or an access control upgrade. We’ll give you the exact price before any work begins, and we’ll fix what you have instead of selling you something you don’t need.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Lauderdale-by-the-Sea and coastal Broward County.