Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Cocoa, FL
Gate installation in Cocoa runs $1,800 to $8,500 for most residential work, depending on whether you’re retrofitting a 1960s ranch house off Dixon Boulevard or putting in a new automatic driveway gate in a 32926 subdivision. What makes Cocoa different is the salt air. Steel hardware that would last 15 years inland starts showing rust in five here, so material selection matters more than almost anything else. Miami Gate Company has served Cocoa since 2012, and we plan every install around corrosion resistance first. Call (833) 570-5807 for a free estimate on your gate project.
Why Cocoa Homes Are Different
Cocoa’s gate work splits into two distinct worlds. The older neighborhoods around the Indian River, especially in the 32922 and 32923 ZIP codes, are full of 1950s through 1970s ranch homes with original chain-link and wood fences. Those gates are often hung on posts that have been soaking up humidity for five decades. By the time we get there, the hinges have usually rusted through, the post has rot at the base, and the gate is dragging on the ground. Retrofitting modern hardware onto those aging posts is a different job than new construction, and it’s most of what we do in those areas.
The newer construction in 32926 and points west is often HOA-governed, with vinyl or aluminum fencing and specific style requirements. Those jobs are less about rescue and more about matching the right gate to an architectural standard while still choosing hardware that won’t corrode in Cocoa’s subtropical climate. Between the humidity, the salt-laden coastal air, and the hurricane wind loads that hit every few years, a gate in Cocoa needs better anchoring and better materials than the same gate would need 20 miles inland. We plan for that from the first measurement.
Styles & brands we work with
Our Main Cocoa Services
Cocoa homeowners call us about two things more than anything else: a gate that won’t move, and a gate that moves when it shouldn’t. Here’s how each works in Cocoa specifically.
Gate Repair in Cocoa
When a gate stops swinging or sliding properly in Cocoa, it’s usually rust or a failed operator. We see hinge pins that have seized from salt corrosion, sagging frames on older wood gates, and track systems clogged with sandy soil from the coastal ground. Our repair work starts with a full inspection of the hardware, then a diagnosis that tells you whether the gate can be saved with new parts or whether the post itself has failed. A lot of Cocoa repairs come down to replacing hardware that was never rated for coastal exposure. Gate Repair in Cocoa covers everything from broken hinges to full gate resets on new posts.
Electric Gate Repair in Cocoa
Electric gates fail differently in Cocoa than they do inland. The control boards corrode faster, the safety sensors get coated with salt film, and the motors work harder against rusty tracks and hinges. We diagnose at the component level, checking the motor, board, sensors, loops, and wiring rather than replacing the whole operator on a guess. That matters when a DoorKing or Ghost Controls unit has years of life left but a $40 sensor is what’s actually failing. Electric Gate Repair in Cocoa walks through what we check and what typical repairs cost.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Cocoa
Gate installation in Cocoa is about matching the gate to the site, and the site changes block by block. A new automatic gate on a 32926 cul-de-sac with HOA aluminum fencing needs different hardware than a driveway gate on an older 32923 lot where the posts are original to a 1960s build and the soil is soft from decades of irrigation. The humidity and salt air mean we spec stainless or powder-coated hardware on every job, and hurricane season means every post gets anchored deeper than a standard install would call for. That’s the standard we’ve applied on Cocoa installs since 2012. Whether you need a full Gate Installation or a single driveway gate replacement, we handle the entire job from concrete work to final programming.
Automatic Gate Installation
Signs you need it
You’re still getting out of the car to open your gate, or you have a manual gate on a property that now needs controlled access for tenants, deliveries, or HOA compliance.
What it costs in Cocoa
Automatic gate installation in Cocoa typically runs $2,500 to $8,500 for a complete system, including the operator, gate, posts, and controls.
How we do it
We set reinforced posts, hang the gate, mount the operator, run the power and control wiring, install safety edges and photo sensors, then program remotes and keypads and test the full cycle until it runs clean.
Driveway Gate Installation
Signs you need it
The existing driveway gate has sagged, rotted, or been patched so many times that repairs no longer make sense, or there’s no gate at all and you want controlled access from the street.
What it costs in Cocoa
Driveway gate installation in Cocoa runs $1,800 to $7,000 depending on width, material, and whether automation is included.
How we do it
We measure the opening and slope, check for underground utilities, set posts in concrete at the right depth for Cocoa’s wind loads, hang and level the gate, then add hardware and automation if you want it.
Sliding Gate Installation
Signs you need it
Your driveway is too short or too steep for a swing gate, or you have a wide commercial-style opening that needs a track-mounted solution.
What it costs in Cocoa
Sliding gate installation in Cocoa generally falls between $2,800 and $9,000, with cost driven by gate length, motor size, and whether the track needs concrete work.
How we do it
We pour or repair the track bed, set the gate frame, install the rollers and track, mount the sliding operator, then wire, program, and cycle-test the system with the safety sensors in place.
What Gate Installation Costs in Cocoa
| Item | Typical range in Cocoa |
|---|---|
| Automatic gate installation | $2,500 – $8,500 |
| Driveway gate installation | $1,800 – $7,000 |
| Sliding gate installation | $2,800 – $9,000 |
How long does gate installation take in Cocoa?
Most Cocoa installs take one to three days. Concrete post footings need a day to cure before we hang the gate, and automatic systems add programming and safety testing time. We’ll give you a firm schedule at the estimate.
Do you handle HOA approval in Cocoa?
We install to HOA specs but you’ll need to submit the design for approval. We provide material specifications, dimensions, and photos that help the application move faster, and we match existing fencing styles so approvals go smoother. Call (833) 570-5807 and we’ll help you prepare what your HOA needs.
Brands We Service in Cocoa
We work on Ghost Controls, DoorKing, Elite, and Mighty Mule systems regularly in Cocoa, plus five other major brands. Because we’re brand-agnostic, we diagnose what your system actually needs rather than pushing a replacement you don’t require. Common operator parts are stocked in our service vehicles, which keeps most Cocoa repairs to a single visit.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Cocoa, FL
| Service | Typical range in Cocoa |
|---|---|
| Automatic gate installation | $2,500 – $8,500 |
| Driveway gate installation | $1,800 – $7,000 |
| Sliding gate installation | $2,800 – $9,000 |
| Gate opener repair | $150 – $500 |
| Broken hinge replacement | $75 – $300 |
| Gate frame repair | $250 – $900 |
| Control board replacement | $300 – $900 |
| Electric gate repair | $150 – $800 |
Coastal corrosion pushes material costs up in Cocoa compared to inland Brevard. We quote the full price before any work starts, so the number you approve is the number on the invoice.
Neighborhoods We Serve in Cocoa
We cover all Cocoa ZIP codes, including 32922, 32923, 32924, and 32926. Most neighborhoods are within a 20 to 30 minute response window for us.
- Cocoa Village
- Diamond Square
- Port St. John
- Rockledge Drive corridor
- Suntree
Service Area – Cities Near Cocoa
We also work across the surrounding Space Coast communities. If you’re in Cocoa West, FL or Port Saint John, FL, you’re well inside our normal service area. We handle gate jobs in Merritt Island, FL and Rockledge, FL on the same schedule we run in Cocoa itself.
Serving Cocoa, FL — Our Local Coverage Area
We’re based in the Cocoa area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Cocoa
Most Cocoa repair calls get a same-day or next-day visit, depending on the time of day you call and where the problem is. Coastal 32922 and 32923 are usually within 20 to 30 minutes of our techs. Call (833) 570-5807 and we’ll give you a real arrival window for your specific address.
Most residential gate replacements on existing posts don’t require a permit, but new automatic gates and driveway gates in HOAs often need approval. Cocoa’s building department has specific requirements for new driveway construction. We’ll tell you what applies to your property at the estimate.
Yes, we handle commercial and HOA gate systems across Cocoa’s ZIP codes. That includes vehicular swing and slide gates, keypad and phone entry systems, and exit loops. The same brand-agnostic diagnosis applies whether it’s a single driveway or a 30-unit community.
If your gate is sagging, stuck, or the operator quit, call Miami Gate Company at (833) 570-5807 for a free estimate. We’ve served Cocoa since 2012 and we’ll tell you plainly what’s wrong and what it costs to fix before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Cocoa Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Alma Vargas"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Bethany Hayes"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Javier Mendoza