Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Port Saint John, FL | Miami Gate Company
We provide independent Ghost Controls gate repair across Port Saint John, FL, from the 1980s ranch lots on Fay Boulevard to the newer subdivisions going in near Grissom Parkway. The thing that separates our Ghost Controls work here from other shops? We test the battery, charge controller, and gate mechanics before we ever condemn the operator. If your Ghost Controls arm stalls, reverses, or won’t respond, call (833) 570-5807 and describe what it’s doing. We’ll give you a straight read on whether it’s a board, a battery, or a hinge problem before we schedule the truck. For more on our full brand coverage, see our Ghost Controls sales & service page.

Why Port Saint John Residents Choose Us for Ghost Controls Service
Ghost Controls built their reputation on DIY-friendly kits. That’s a double-edged sword. The install is approachable, but when something fails two years later, the owner is left holding a schematic and a multimeter without the field experience to know what’s actually wrong. We see these systems every week, and we know the AXDP and AXO control boards, the Titan arm geometry, and the 12V battery harness well enough to separate board faults from mechanical faults before we start swapping parts. Ruben Castellano, our owner, spent two decades diagnosing gate failures across Florida before founding Miami Gate Company, and his rule is simple: “If you don’t know exactly what failed, you’re just guessing with someone else’s money.” That’s how we approach every Ghost Controls call in Port Saint John.
We’re an independent shop. We service Ghost Controls alongside LiftMaster, Mighty Mule, DoorKing, FAAC, BFT, Linear, Viking, and Elite. No manufacturer authorization, no warranty endorsement, and no incentive to push you toward a replacement operator when the issue is a corroded terminal or a sagging hinge. We work on virtually any gate system, and our loyalty is to the gate in front of us. Our coverage includes all of Port Saint John service area, ZIP 32927.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Port Saint John
- Dead gate after a rainy stretch. Salt-laden air from the Indian River pits and corrodes Ghost Controls control-board terminals and 12V battery contacts before the outdoor housing shows any wear. The gate works fine Monday, goes dead Wednesday, and the owner assumes the board fried. Usually it’s a corroded battery post or a charge controller that’s been quietly failing.
- Titan arm stalls mid-travel or reverses. Post-storm windblown sand and yard debris pack into swing-arm pivots and hinge points. The Titan arm fights the resistance, trips obstruction limits, and reverses. It reads like a board fault. It’s mechanical, and it’s common in Port Saint John after a summer squall blows through.
- Solar-charged gate goes dead after overcast days. Solar panels on shaded or salt-filmed mounts undercharge the battery. After three or four cloudy summer storm days, the gate won’t move. The owner assumes motor failure. We test charge and load before we blame the operator.
- Older ranch gate binds against sagging hinges. On 1980s and 1990s ranch homes, aged gate posts creep out of plumb and wood leaves swell with humidity. The Ghost Controls arm has to fight a gate that’s out of square, tripping obstruction limits on every cycle. We re-hang the gate rather than sell a new operator.
- Intermittent failure on a gate that worked for years. Ghost Controls wiring harnesses degrade with heat and moisture. The gate works when it’s dry, dies when humidity spikes, and the homeowner chases the problem for weeks. Corrosion inside the wire jacket is invisible until you test continuity under load.
Ghost Controls Service in Port Saint John: What Local Conditions Mean for Your Equipment
Port Saint John is a Space Coast bedroom community split between original 1980s and 1990s ranch lots and newer master-planned subdivisions. Both sit close enough to the Indian River that salt haze reaches them. That means a Ghost Controls solar panel and battery here sulfate and corrode on a schedule the owner only notices after a storm season, not gradually. The battery loses capacity quietly through the dry winter, then a run of overcast summer days leaves the gate dead, and suddenly the operator gets blamed for a charge-system failure. So on Ghost Controls calls in Port Saint John—and for Ghost Controls in Cocoa West—the first move is battery and charge-recovery testing, before we condemn an arm or board. Salt haze also means marine-grade fasteners on every hinge and post bracket, because standard zinc hardware fails fast out here. If your gate sat through Hurricane Ian or Nicole debris, check the panel for salt film. Then call us.
Ghost Controls Models & Products We Service in Port Saint John
We service the full Ghost Controls residential line: AXDP and AXO-series swing operator kits, the Titan series arms (TITAN12 and TITAN24), slide gate operators with rack-and-pinion drives, and solar-charged kits with 12V deep-cycle batteries and panels. We use OEM Ghost Controls boards, harnesses, and arms when the housing is sound, and quality aftermarket stainless hardware and marine-grade fasteners where OEM parts are the corrosion weak point, which is exactly the pattern we see in Port Saint John and where we handle Ghost Controls in Merritt Island. We replace a board or battery when it’s genuinely failed, but re-hang and re-plumb the gate rather than sell a new operator when the mechanics are the real problem. That’s the honest read, and it’s what keeps repair costs down.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Port Saint John
Ghost Controls board replacement in Port Saint John typically runs from $280 to $475 installed, depending on whether it’s an AXDP dual-gate board or a single Titan control. Battery replacement for solar systems lands between $120 and $220, and that includes load testing the old battery so you know it actually failed. Full diagnostic service, including battery, charge-controller, hinge, and arm geometry checks, runs $85 to $140 per trip, and we credit the diagnostic toward any repair we quote. Every price is quoted and agreed before any work starts, so you won’t get an invoice bigger than the number you approved. Call (833) 570-5807 for an exact quote. Estimates are free.
Serving Port Saint John, FL — Our Local Coverage Area
We’re based in the Port Saint John area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Port Saint John
Salt-laden air from the Indian River corrodes battery terminals, charge-controller contacts, and control-board connectors over time. A few inches of rain followed by high humidity is enough to finish off a marginal connection. We test the battery, the charge path, and the board terminals under load, and we replace only what’s actually failed. Call (833) 570-5807 for a diagnostic visit.
Yes. Ghost Controls designs for DIY installers, so we service plenty of owner-installed systems. We don’t care who hung the arm. We care whether the gate is plumb, the battery holds charge, and the board is getting clean power. If the DIY install left a bracket torqued wrong, we’ll fix that too.
Usually not. The AXDP board gets blamed for reverses and stops that are actually mechanical. A hinge pivot packed with storm-blown sand or a post that shifted out of plumb forces the Titan arm to work harder, and the board trips obstruction limits trying to protect the motor. We freed a 1990s ranch gate in Port Saint John with exactly that problem, similar to a Ghost Controls repair in Rockledge we handled last season. The board tested clean. We re-lubed the pivot, re-plumbed the post, re-clocked the arm, and it has cycled fine since.
Yes. Solar-charged Ghost Controls kits depend on clean panel output and a healthy 12V battery. Salt film on the panel glass cuts charging efficiency, and a sulfated battery won’t hold charge through overcast stretches. We test both before deciding whether the panel, the battery, or the charge controller is actually the problem. Call (833) 570-5807 for a charge-system check.
Yes. We match OEM Ghost Controls Titan arms and AXO-series housings when the existing hardware is sound enough to support them. When corrosion has eaten the pivot brackets, we upgrade to stainless or marine-grade hardware and keep the arm geometry identical. You keep the system you know rather than paying for a full operator swap.
Service Areas Near Port Saint John
Beyond Port Saint John, we cover Ghost Controls gate work across Brevard County and into nearby communities. For customers a little west, see Ghost Controls service in Loughman. For those toward the Orlando side, we have Ghost Controls service in Kissimmee. If you’re on the Space Coast, the number’s the same: (833) 570-5807.
Book Your Ghost Controls Service in Port Saint John Today
Ghost Controls gate acting up in Port Saint John? Call (833) 570-5807 for a free estimate. We’ll diagnose the battery, the board, and the gate mechanics before we quote anything, and every price is agreed before work begins. Gates are all we do.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Port Saint John and the Space Coast.