Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Boynton Beach
Gate repair in Boynton Beach usually comes down to two things: salt-air corrosion and storm damage. We fix both, and we work on virtually any gate system you already own. From the HOA corridors along Hagen Ranch Road to older ranch homes west of the Intracoastal and the active-adult communities out toward 33437, we’re the gate-only crew that shows up, diagnoses the actual problem, and gets your gate moving again the same visit whenever parts are on the truck. Call (833) 570-5807 for a free estimate, and you’ll get a price before we touch anything.
Why Miami Gate Company Is Boynton Beach’s Preferred Gate Repair Company
Boynton Beach sits in a band of South Florida where gates fail in patterns, not one-offs. Whole neighborhoods built in the 1990s along Hagen Ranch Road and Boynton Beach Boulevard share the same slide operators, the same coastal air, and often the same property manager. That means we’re not learning your community’s gate history from scratch. We see the same makes, the same corrosion points, and the same HOA coordination needs across multiple entrances in a single afternoon.
Our technicians are trained on at least nine major gate and operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Boynton Beach because a repair call here rarely starts with “what brand is it?” It starts with “it stopped opening after the storm” or “the board is flashing a fault.” We diagnose the motor, control board, safety sensors, and wiring, not just the obvious parts. Ruben Castellano built the company around that kind of component-level thinking, and our Boynton Beach customers call us back because we fix what’s failing, not just what’s visible.
Styles & brands we work with
Driveway Gate Repair in Boynton Beach
Driveway gate repair in Boynton Beach typically means a steel or aluminum swing or slide gate that’s been in service 20 to 40 years, with hinges or rollers corroded by humid, salt-heavy air. A single driveway gate repair here usually runs $180 – $340 for hinge replacement and realignment, and $350 – $800 when the operator, control board, or rack and pinion are involved. We quote the full price before any work starts, so you know the number going in.
Hinge and Post Repair
Salt-air corrosion is the quiet killer of hinges and posts within a few miles of the ocean. A gate that sags but looks fine in the middle usually has a worn hinge or a post that’s shifted in saturated soil. We reset the footing, replace the hinge if needed, and realign the panel so it doesn’t bind.
Gate Realignment
After a tropical storm, solid-infill gates get knocked out of plumb fast. Wind load pushes the panel, the ground softens, and the gate starts dragging instead of gliding. We do a sag correction on the panel, verify the operator isn’t fighting the weight, and test the full travel before we leave.
Gate Welding in Boynton Beach
Gate welding in Boynton Beach is how we save gates that a fencing company would replace. On older steel gates in this climate, rust doesn’t just sit on the surface; it works into welds, hinge plates, and the rack mounts. A cracked weld or rusted-through joint on a Boynton Beach gate can often be repaired for $150 – $400, where a full new gate and operator would run into the thousands.
Weld and Rust Repair
We cut out the rotted section, weld in new steel, and grind it flush so the repair carries the gate’s load, not just its looks. On gates near the Intracoastal or within a couple miles of the ocean, we treat the repaired area for rust before it leaves our hands.
Structural Reinforcement
A gate that’s sagging from a cracked frame or a hinge plate pulling away needs more than a bolt. We weld reinforcement plate where the load actually lands, which on Boynton Beach’s older ranch-style gates is usually the hinge-side stile and the bottom rail.
Trusted Brands We Service in Boynton Beach
If your gate says DoorKing, Elite, or Mighty Mule, we service it. Same goes for Ghost Controls, LiftMaster, FAAC, BFT, Linear, and Viking. We don’t push one brand over another; we fix what you have. Our techs carry boards, remote receivers, and loop detectors for the common 1990s-era HOA slide operators along Boynton Beach Boulevard, which means less waiting when a property manager calls about a gate that won’t open. Call (833) 570-5807 and we’ll tell you over the phone whether it sounds like a board, a loop, or a mechanical bind.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Boynton Beach Homes
- Seized hinges and rollers from salt air. Within a few miles of the ocean, hinges on 20 – 40 year old steel and aluminum gates corrode until the gate binds mid-swing. We replace the hinge or roller and lubricate the rest so the panel moves freely again.
- Control boards killed by humidity and power surges. Boynton Beach’s year-round humidity plus the storms that roll through from June to November shorten control board life. We see the same fried capacitors and corroded terminals across whole neighborhoods.
- Posts shifted in saturated ground. Stormwater soaks the soil around gate posts, and a solid-infill panel acts like a sail. The post moves, the gate drags, and the operator overloads. We reset the footing and realign before the motor burns out.
- Stuck-closed gates after a power cut. When the power goes out in a storm, many operators won’t move because the manual release was never tested and the key is long gone. We install and verify manual releases, and we show you how to use them safely.
Pricing for Gate Repair in Boynton Beach, FL
Gate repair in Boynton Beach typically runs $180 – $340 for hinge or roller replacement with realignment, $150 – $400 for weld and rust repair, and $350 – $800 when the operator, control board, or rack and pinion need replacement. Storm-damage calls that require post resetting and panel realignment usually fall in the $500 – $1,200 range. What shifts the number is part availability, post condition, and whether the safety sensors need replacement at the same time. Every quote is agreed before work starts. Call (833) 570-5807 and we’ll give you a straight number, not a vague range that grows later.
We Also Serve Cities Near Boynton Beach
Beyond Boynton Beach, our gate repair teams cover Boynton Beach‘s neighbors: Aberdeen, Ocean Ridge, Atlantis, and Hypoluxo. If yours is one of the older automatic gates in those communities, the same salt-air and storm failures apply, and we fix them the same way. We also run our full Gate Repair service across South Florida from our Miami base.
Serving Boynton Beach, FL — Our Local Coverage Area
We’re based in the Boynton Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Boynton Beach
Open the operator’s cover, locate the manual release handle (usually a red or yellow T-handle on the side of the motor), and pull it firmly to disengage the drive. Then push the gate by hand. Never force a gate that’s binding; if it won’t move with moderate effort, the problem is mechanical, not the power. Call (833) 570-5807 and we’ll come verify the release and show you the procedure on your exact model.
Because whole HOA communities along Hagen Ranch Road were built in the 1990s with the same slide gate operators, the same steel racks, and the same coastal exposure. When one fails from a corroded rack and pinion or a burned control board, the others in the same phase of construction usually aren’t far behind. Property managers often bring us in to repair one gate and then inspect the rest of the community’s entrances in the same visit.
The problem is almost always at the hinge or the post, not the middle of the panel. A worn hinge pin or a hinge plate pulling away from the post lets the latch side drop. On Boynton Beach’s older steel gates, it’s also common for the bottom hinge weld to crack from years of salt-air corrosion. We repair it at the hinge, not the center.
Yes, any automated gate in Boynton Beach must have functioning entrapment protection, which typically means safety photocells, contact edges, or both. The UL 325 standard applies to all new installations and repairs, and post-storm, we always verify the photocell trips and reverses the gate before signing off a repair. If your gate reverses on nothing or won’t close without holding the button, your sensors need attention.
Yes. We cover the full Boynton Beach area including the 33437 and 33472 corridors and the active-adult communities out toward the western edges. Storm-damaged posts, binding slide gates, and dead operators after a power surge are all routine calls for us out there. Call (833) 570-5807 and we’ll schedule a visit and price the whole repair before we begin.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Boynton Beach with dedicated gate repair and installation.