Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Sunrise
Electric gate repair in Sunrise usually means one of three things: a motor that quit, a gate that grinds halfway and stops, or a system that works fine for one remote but not the other. We fix all three, and we do it across every major brand. If your gate is stuck open, stuck shut, or making a sound it never made before, call (833) 570-5807. We know Sunrise’s neighborhoods, from Sawgrass to the older 1970s subdivisions, and we diagnose the actual failure rather than guessing at parts.
What makes Sunrise different from neighboring cities is the age of the housing stock. Most homes here went up between 1970 and 1995, and the gates that came with those homes are now 30 to 50 years old. The operator, the hinges, the post footings, the wiring, all hit their service limits around the same window. That’s why we see concentrated pockets of gate failures here, street by street, year by year. You’re not imagining it. Your neighbors’ gates are failing too, for the same reasons yours is.
Why Miami Gate Company Is Sunrise’s Preferred Electric Gate Repair Company
Ruben Castellano built Miami Gate Company around one idea: gates are all we do, and that focus shows in the diagnosis. We’re not a fencing outfit that occasionally touches an opener. We’re not a general handyman service. Every technician on our team works on gate motors, control boards, loops, sensors, and remotes day in and day out. When a Sunrise homeowner calls about a gate that reverses for no reason or a keypad that works at noon but not at 9 p.m., our first questions are about the specific components, not the brand sticker on the cover.
In Sunrise, that matters more than in most cities. Our Electric Gate Repair team deals with HOA-governed subdivisions where the original gate has to match a community standard. We’ve handled repair approvals with architectural review boards in Sawgrass and other planned communities, so we know what documentation helps the process move. We also know which brands hold up in South Florida’s salt-laden air and which ones typically fail at the hinge post first. That local knowledge shortens the time between your first call and a working gate.
We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, and Mighty Mule systems, which means we often skip the “we’ll order it and come back next week” step that slows down other contractors. For Sunrise customers, we stock the corrosion-resistant hardware that this climate demands. Stainless hinges, sealed conduit fittings, surge-protected boards, the components that actually survive hurricane season. We also work with both residential and commercial systems, so a homeowner with a single swing gate and a property manager with an access-controlled entrance get the same level of attention.
Styles & brands we work with





Electric Gate Motor in Sunrise
An Electric Gate Motor in Sunrise gets worked harder than the same motor in many other Florida cities. The planned communities here, built largely through the 1970s to 1990s, relied on aluminum and steel gates that were designed for manual operation. Many were retrofitted with automation later, and the retrofit rarely included proper conduit or a correctly sized hinge post. The motor strains against geometry it was never meant to overcome. In Sunrise, a gate motor repair typically runs $285 to $520 for residential swing gates, depending on whether we’re replacing the capacitor, the gear assembly, or the entire operator head. Commercial slide gate motors start higher, usually $900 to $1,800, because the rack, the chain, and the load are all bigger.
Operator Replacement vs. Component Repair
We always quote the component-level fix before recommending a full operator swap. A motor that hums but doesn’t move might need a $45 start capacitor, not a $700 operator. A board that resets after a storm might need a surge protector inline, not a new brain. Ruben Castellano’s rule for the team is simple: if we can fix it for $300 and give you another five years, we tell you that. If the repair won’t survive the next storm season, we say that too.
When the Motor Is Fine but the Gate Won’t Move
Voltage drop is the quiet killer in Sunrise. The original manual gates in these communities never had a power run. When automation was added, someone ran a thin wire through a garden hose or left the conduit above ground. The result is a motor that receives 98 volts instead of 120, overheats, and trips. We check voltage at the motor and at the panel before condemning anything. A new dedicated circuit and properly trenched conduit fixes what three motor replacements never would.
Gate Access Control in Sunrise
Gate Access Control in Sunrise means more than a keypad and a clicker. For HOAs and multi-tenanted developments here, it means vehicle loop detectors, phone-entry systems, keycard readers, and safety photocells wired so the gate meets UL 325 requirements. For homeowners, it usually means a keypad, a remote, and a way to let a delivery driver in without walking to the gate. Basic residential keypad replacement in Sunrise runs $185 to $340. A new phone-entry or card-reader system for a community entrance typically lands between $1,200 and $3,800 depending on the number of users and whether we’re reusing existing conduit.
Loop Detectors and Safety Edges
The loop detector is the part most people don’t know they have. It’s the wire buried under the driveway that tells the gate a car is there, so the gate doesn’t close on it. In Sunrise’s sandy soil, these loops get cut by root growth, shifted by years of rain, or simply fail. When a gate starts closing on a car that hasn’t moved, the loop is the first suspect. We install replacement saw-cut loops and tune the sensitivity to the actual driveway configuration.
Surge Protection for Storm Season
South Florida thunderstorms take out more control boards than any mechanical failure. A nearby lightning strike can send a spike through the power line, through the phone line, or through the intercom wire straight into the board. We recommend surge suppression on every access control install in Sunrise, hardwired at the panel and at the operator. It’s a $90 to $150 add-on that routinely saves an $800 board. We’ve seen it too many times not to bring it up.
Trusted Brands We Service in Sunrise
Sunrise homeowners run systems from Ghost Controls, DoorKing, Elite, Mighty Mule, and several other manufacturers. We work on all of them. Brand-agnostic means we diagnose the system you actually have and fix it, rather than steering you toward a replacement we’d rather sell. Our Sunrise trucks carry common boards, remotes, safety sensors, and hardware for the brands we named, and for the other four we service routinely: LiftMaster, FAAC, BFT, Linear, and Viking. If you already have a brand you like, there’s no reason to leave it. If it’s time to upgrade, we’ll tell you what works, not what one manufacturer pays us to push.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Sunrise Homes
- Hinge post failure on original aluminum gates. Thirty-plus years of salt-laden humidity eats the post from the inside, and the gate starts to sag. Fixing the panel without replacing or reinforcing the post means the gate sags again within a season.
- Builder-grade operators on manual-era gates. Newer Sunrise developments often have gates that were installed manual and automated later. The undersized hinge posts and missing conduit cause voltage drop and premature motor burnout.
- Tripping breakers after rain. In Sawgrass and similar neighborhoods, we trace this to failed loop detectors and water intrusion at the post footing, especially where conduit was added after construction without proper sealing.
- Keypads and intercoms that fail at night. Corroded wire splices under the driveway or at the base of the post expand and contract with temperature. The connection works in the afternoon heat and opens at night. We find these with a multimeter, not a parts guess.
Pricing for Electric Gate Repair in Sunrise, FL
We quote every repair before we start, and the price we quote is the price you pay. No invoice surprises. For most Sunrise homes, a service call plus diagnosis runs $85, which we credit toward the repair if you proceed. Common fixes land in these ranges: hinge and post reinforcement $300 to $700, loop detector replacement $250 to $450, control board repair or replacement $350 to $900, remote and receiver service $120 to $260, and full operator replacement $700 to $2,200 depending on the gate size and brand. Commercial gates and community entrances run higher because the equipment type and safety requirements are different. Call (833) 570-5807, describe what the gate is doing, and we’ll give you an honest range for your specific system. Estimates are free.
We Also Serve Cities Near Sunrise
If you’re in Wilton Manors, Boulevard Gardens, Rock Island, or Roosevelt Gardens, we cover those areas too. Many of our Sunrise customers manage properties across these neighboring cities, and our Sunrise service area extends naturally into them. Same brand coverage, same component-level diagnosis, same free estimates. Gate repair doesn’t stop at a municipal line.
Serving Sunrise, FL — Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Sunrise
Sawgrass gates fail more often because the original aluminum and steel gates were installed in the 1970s through 1990s and are all reaching end-of-life at the same time. The HOA-governed subdivisions also require matching original finishes, which means gates that should have been retired under a different maintenance program stay in service longer. Add South Florida’s salt-laden humidity and hurricane wind loads, and you get hinge corrosion, operator strain, and control board failures happening in clusters. Call (833) 570-5807 if your Sawgrass gate is behaving erratically and we’ll tell you whether it’s a repair or a replacement based on the actual condition.
Yes, often you can automate a manual gate in Sunrise without replacing the gate itself, as long as the hinge post is structurally sound and there’s a viable path for power and conduit. The places where this goes wrong are retrofits where the original gate was never designed for automation. Undersized posts and missing conduit create voltage drop and motor stress. We evaluate the post, the gate weight, the swing geometry, and the power run before recommending automation. In some Sunrise communities, you’ll also need HOA architectural review approval before any visible change goes in. We can help with that documentation.
Any electric gate operator installed or substantially repaired in Sunrise must meet UL 325 safety standards, which means primary and secondary entrapment protection. That typically includes a safety photocell or contact edge that stops and reverses the gate when something is in the path, plus a current-sensing motor. Sunrise does not write its own separate gate safety code beyond the state and federal standards, but HOA architectural review boards in communities like Sawgrass may require that replacement gates and visible hardware match the original design. We install and verify all required safety devices on every repair that involves an operator, and we test the entrapment protection before we call the job done. Call (833) 570-5807 with questions about your specific gate.
Salt-laden humidity in Sunrise accelerates corrosion on steel gate hinges, post footings, and the electrical connections inside both the operator and the junction boxes. We see the wiring corrode from the inside out, especially where conduit was added after construction and never properly sealed. The corrosion increases resistance, so the motor draws more current, runs hotter, and burns out its capacitor or its windings. The fix usually means corrosion-resistant hardware, sealed conduit fittings, and a dedicated surge-protected circuit. These are standard recommendations for any long-term repair in this area, and they’re the difference between a gate that lasts two more years and one that lasts ten.
In many Sunrise subdivisions, yes, you need HOA architectural review approval before repairing or replacing a gate that’s visible from the street, even if it’s an exact match. The city enforces strict planned-community codes, and the HOAs enforce their own standards on top of that. If you’re replacing the gate with a different style, changing the finish, or adding automation to a previously manual gate, assume you need approval. Miami Gate Company has worked with Sunrise HOAs on these reviews, and we can provide the technical details, product specs, and specifications your board will ask for. If your repair is an invisible component swap, like a control board or remote receiver, HOA involvement usually isn’t needed. When in doubt, ask your management office and call us at (833) 570-5807 and we’ll tell you what the work involves.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Sunrise and South Florida since the company’s founding. Gates are all we do, and this page reflects what we see in Sunrise specifically, not a template that could be stamped on any city.