Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across South Palm Beach
When an electric gate stops opening on South Palm Beach’s barrier island, it’s usually not the motor that failed first. It’s the salt. We diagnose the whole system, not just the obvious part, because a corroded hinge post on Ocean Drive will kill a brand-new operator just as fast as it killed the old one. Our electric gate repair team covers all of South Palm Beach, FL 33460, from the oceanfront condos to the Intracoastal side, and we stock marine-grade parts locally so repairs don’t stall waiting on a shipment. Call (833) 570-5807 for a free estimate, and we’ll tell you what actually failed and what will survive.
Key Takeaways:
- We repair gate openers, control boards, safety sensors, keypads, and remote controls on virtually any brand, including LiftMaster, FAAC, BFT, DoorKing, and Mighty Mule.
- South Palm Beach’s salt air corrodes standard galvanized gate hardware within two seasons, so we spec marine-grade fasteners and sealed operators as standard on this island.
- Pricing is quoted and agreed before any work starts, and estimates are free.
Why Miami Gate Company Is South Palm Beach’s Preferred Electric Gate Repair Company
Ruben Castellano founded Miami Gate Company as a gate-only shop, not a fencing company that dabbles in openers. That distinction matters on South Palm Beach, where gate failures are rarely simple mechanical breaks. We see the full picture: a control board shorted by humidity, a hinge post rusted through at the base, a safety sensor clouded by salt film. Our technicians are trained across nine major gate and operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That brand-agnostic depth means when we recommend a repair versus a replacement, the recommendation is based on what your system needs, not what a single manufacturer incentivizes.
South Palm Beach customers call us because we already know what their building stock looks like: 1950s to 1970s condo buildings and small single-family homes on a thin strip between the Atlantic and the Intracoastal, many with original gates mounted on aged masonry or metal posts that have been repeatedly patched. We have repaired enough gates on this island to know that the fourth patch on a hinge post is usually the last one that will hold. When we arrive in South Palm Beach, we’re not spending the first hour figuring out the neighborhood. We’re already diagnosing the system.
Styles & brands we work with
Gate Opener Repair in South Palm Beach
Gate Opener Repair in South Palm Beach usually means one of three things: a swing gate opener straining against a sagging gate, a slide opener jamming on corroded track, or a control board that has shorted from constant salt fog and humidity. We diagnose the motor, the board, the sensors, and the wiring as one system, because an opener that burned out once will burn out again if the underlying bind or short is never fixed. A typical gate opener repair in South Palm Beach runs $250 – $600 depending on whether it’s a board replacement, a capacitor, a limit switch, or a full motor rebuild, and we quote that price before any work begins.
Marine-Grade Component Replacement
On this island, we don’t replace a corroded opener component with the same part and call it done. We replace it with the version that survives salt air: sealed boards, stainless fasteners, corrosion-resistant limit switches. The difference in parts cost is minor; the difference in service life is measured in years.
Strain Diagnosis Before Motor Replacement
If your swing gate sags and the opener strains, replacing the motor without addressing the hinge post is a temporary fix. We check the post, the hinge, and the gate’s weight distribution before we condemn an opener, because on South Palm Beach the post usually fails before the motor does.
Automatic Gate Repair in South Palm Beach
Automatic Gate Repair in South Palm Beach covers the full electrical and mechanical chain: the operator arm, the control board, the safety sensors, the keypad, the remotes, and the power feed. Automatic gates here fail in patterns we see repeated up and down Ocean Drive: a keypad that stops accepting codes because salt fog has crept into the membrane, a sensor that reads an obstruction that isn’t there because the lens is filmed with salt, an operator that trips its breaker because a corroded hinge has increased the gate’s resistance. A typical automatic gate repair in South Palm Beach runs $180 – $450 for common component-level fixes, and more involved board or sensor replacements can reach $700. Every price is quoted and agreed before work starts.
Safety Sensor Repair and Alignment
Florida’s high-velocity hurricane zone building standards require automatic gates to have functioning safety sensors, and South Palm Beach’s building officials take that seriously. We clean, realign, and replace sensors that have been compromised by salt film or humidity, and we test them under load before we leave.
Keypad and Remote Reprogramming
Most keypad failures on the barrier island trace back to moisture intrusion in the keypad housing or the wiring behind it. We open, dry, and reseal the housing, replace the membrane if needed, and reprogram all remotes and keypad codes while we’re on site, so you don’t have to call us back a month later for a code that stopped working.
Trusted Brands We Service in South Palm Beach
We work on virtually any gate system, whatever brand you have, we know it. South Palm Beach driveways run the full range: LiftMaster and FAAC on the older condos, BFT and DoorKing on the newer installations, and Ghost Controls, Elite, and Mighty Mule on the single-family homes. Because we’re brand-agnostic, we’re not here to sell you a system you don’t need. We fix what you have, with parts that match the original spec or exceed it where the salt air demands better. If a board has to be ordered, we tell you that upfront and we keep the job moving with local parts sourcing and fast turnaround.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in South Palm Beach Homes
- Rusted Hinge Posts on Aged Masonry: Salt spray attacks the base of the post first, where it meets the footing. The post corrodes, the gate sags, and the operator strains against a load it was never designed to move. We replace the footing and the post with marine-grade stainless, not another piece of galvanized steel that will fail by the second summer.
- Control Boards Shorted by Humidity and Salt Fog: Oceanfront driveways put a constant film of salty moisture on every exposed component. A control board that’s not sealed will short out its low-voltage circuits, and the gate will behave erratically or not at all. We spec sealed boards and conformal-coated electronics for beachside properties.
- Galvanized Hinges Locking Up: A standard galvanized hinge on a beachside driveway locks up by the second summer. We replace them with marine-grade stainless hinges and fasteners, which is the difference between a gate that swings freely and one that seizes in the closed position during hurricane season.
- Keypads and Remotes Failing from Moisture: Keypad housings on the barrier island take direct salt spray and heavy rain, and the wiring behind them wicks moisture into the wall. We reseal the housing, replace corroded wiring connections, and reprogram all entry codes in one visit.
Pricing for Electric Gate Repair in South Palm Beach, FL
Gate opener repair in South Palm Beach typically runs $250 – $600. Sensor replacement runs $180 – $350. Keypad replacement or reprogramming runs $150 – $300. Control board replacement runs $300 – $700 depending on the brand and whether the board needs to be ordered. Full post and hinge replacement jobs run $600 – $1,200 when the footings are involved. What moves the price isn’t mystery, it’s parts availability, the condition of the existing hardware, and whether the salt damage has spread past the component you first noticed. We quote the full price before any work starts, and estimates are free. Call (833) 570-5807 for an exact number on your gate.
We Also Serve Cities Near South Palm Beach
Our Electric Gate Repair coverage extends beyond South Palm Beach to nearby communities including Lake Clarke Shores, Palm Springs, Lake Worth Corridor, and Atlantis. If your gate is acting up and you’re just across the bridge or a few blocks inland, the same team and the same marine-grade standards apply.
Serving South Palm Beach, FL — Our Local Coverage Area
We’re based in the South Palm Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in South Palm Beach
Salt air is the main reason. South Palm Beach sits on a barrier island with direct oceanfront exposure, and the constant salt spray, high humidity, and hurricane-season wind loads corrode operator housings, control boards, hinges, and fasteners years faster than inland. Standard galvanized hardware locks up by the second summer, and unsealed control boards short out from salt fog. Operators here need marine-grade fasteners and sealed electronics to survive. Call (833) 570-5807 and we’ll tell you what’s failing and what will actually last.
Stop running the opener and call us. A sagging gate means the hinge post or the hinge itself has failed, usually from corrosion at the base, and every cycle of the operator adds strain to a motor that’s already working too hard. On Ocean Drive in South Palm Beach, we repaired a LiftMaster swing gate operator on a 1960s condo driveway where the original hinge post had rusted through at the base. The gate sagged and the operator strained; we replaced the footing and hinge post with marine-grade stainless and sealed the operator board against salt air. Two seasons later, the gate still cycles smoothly with no corrosion lock-up. The fix starts with the post, not the motor.
We repair existing LiftMaster and FAAC operators whenever the damage is repairable at the component level, whether that’s a control board, a limit switch, a capacitor, or a gear. We only recommend replacement when the cost of the repair approaches the cost of a new unit, or when the operator has been repeatedly damaged by the same underlying bind. Because we’re brand-agnostic, we’re not pushing you toward a new system. We’ll show you what failed and what the numbers are, then you decide. Call (833) 570-5807 for a straight answer on your specific operator.
Yes. South Palm Beach sits in a high-velocity hurricane zone, and Florida building code requires automatic gates to be equipped with functioning safety sensors that stop and reverse the gate when an obstruction is detected. Condo associations and property managers also carry liability exposure if sensors are disabled or bypassed. We test, clean, and realign sensors on every automatic gate repair we do here, and we replace sensors that salt film or humidity have compromised.
Yes, we install and service solar gate openers on South Palm Beach properties where running a power line to the gate is impractical or where the HOA prefers a self-contained system. The same salt-air rules apply: the solar panel, the battery enclosure, and the operator all need to be sealed and marine-rated to survive the island’s conditions. We spec them accordingly, and we quote the full installation before any work starts. Call (833) 570-5807 to talk through whether solar makes sense for your property.
Written by Ruben Castellano, Owner at Miami Gate Company, serving South Palm Beach with electric gate repair, automatic gate repair, and full gate installation services.