Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Tavernier, FL
Gate installation in Tavernier means building for salt, wind, and water. Most of the homes here sit on canal-front or bayfront lots where the onshore breeze carries salt spray year-round, and the driveways that lead to boat slips need gates that open reliably without corroding at the hinges or shorting at the control board. Miami Gate Company has served Tavernier since 2012, and we install electric gates, driveway gates, and sliding gates built for this specific environment. Call (833) 570-5807 for a free estimate on a gate that lasts.
Why Tavernier Homes Are Different
Tavernier’s housing stock runs from 1950s concrete block homes on the original platted streets to newer elevated canal-front residences, with driveways and boat slips that often share the same access point. The older galvanized gates on those mid-century homes were never designed for decades of salt air, and we regularly see hinge plates rusted through and steel posts flaking at the base. Newer homes face a different problem: the gate and operator are usually installed before the final landscaping, then exposed to a tropical marine climate that gets high humidity, salt spray, and heavy rain all at once.
Repair calls spike after summer storms and during hurricane season, and a surprising share of them trace back to water intrusion. After a high tide or tropical downpour, we find gate operator control boxes flooded or corroded along low-lying canal streets, with wiring that was never meant to sit in standing saltwater. The fix usually means elevating the control box, replacing corroded terminals, and rewiring to meet Keys wind-load and floodplain codes. That’s the difference between a gate that works here and one that fails mid-season.
Styles & brands we work with
Our Main Tavernier Services
The two calls we get most from Tavernier property owners are gate repair and electric gate repair, and both have their own dedicated pages with deeper detail.
Gate Repair in Tavernier
Most gate repair calls in Tavernier start with a gate that won’t open, won’t close, or makes a grinding sound at the hinge. The salt air here eats at pivot points and fasteners faster than anywhere on the mainland, so a visual check of the frame usually tells us most of the story. We work on swing gates and sliding gates, replacing wheels, hinges, and posts, and we do it on-site rather than hauling the gate back to a shop. See the full breakdown on our Gate Repair in Tavernier page.
Electric Gate Repair in Tavernier
When an electric gate stops responding in Tavernier, the problem is usually the motor, the control board, a safety sensor, or the wiring between them. Humidity and salt spray accelerate corrosion on every one of those components, especially in low-lying areas. We diagnose the whole system, not just the part that looks fried, because a shorted sensor can burn out a brand-new board if it’s not caught. We service Ghost Controls, DoorKing, Elite, and Mighty Mule operators, among others. Details are on our Electric Gate Repair in Tavernier page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Tavernier
Gate installation in Tavernier is a different job than it is on the mainland. We’re building for a tropical marine climate where salt spray, high humidity, and frequent heavy rain mean every fastener, hinge, and control board has to be chosen for corrosion resistance first. The homes range from 1950s concrete block houses with narrow original driveways to newer elevated canal-front residences where the gate and the boat slip have to work together. That means site measurements that account for storm surge, wind load, and floodplain elevation, not just the width of the driveway. For a full look at our process, see our Gate Installation hub page.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open a manual gate, or you want controlled access to a canal-front property where the gate is the first line of defense for an elevated home or boat slip.
What it costs in Tavernier
Automatic gate installation in Tavernier typically runs $4,800 to $12,800 depending on gate size, operator type, and how much of the existing driveway and power run needs to be reworked.
How we do it
We measure the driveway, confirm the swing or slide direction, set corrosion-resistant posts, mount the operator, run the power and safety sensor wiring, and program remotes and keypads before we leave.
Driveway Gate Installation
Signs you need it
Your property has a wide driveway or a shared access point for vehicles and a boat trailer, and you need a gate that opens wide enough for both without binding in the salt air.
What it costs in Tavernier
A driveway gate installation in Tavernier typically costs $3,200 to $9,600 for the gate, posts, hinges, and hardware, with the operator and wiring separate.
How we do it
We build the gate to the driveway’s actual slope and width, set posts at a depth that holds in sandy Keys soil, and align every hinge and wheel so the gate moves without dragging.
Sliding Gate Installation
Signs you need it
Your driveway slopes toward the canal or has limited swing clearance, so a sliding gate is the only configuration that will open reliably without hitting a car, a wall, or a boat trailer.
What it costs in Tavernier
Sliding gate installation in Tavernier typically runs $5,600 to $14,200, with the track, rollers, and motorized operator accounting for a good share of the job.
How we do it
We lay a level track bed, set the roller trucks, hang the gate so it travels smoothly, mount the operator, and adjust the limit switches and safety edges for the full travel.
What Gate Installation Costs in Tavernier
| Item | Typical range in Tavernier |
|---|---|
| Driveway gate installation | $3,200 – $9,600 |
| Automatic gate installation | $4,800 – $12,800 |
| Sliding gate installation | $5,600 – $14,200 |
Can you install a gate that holds up to the salt air in Tavernier?
Yes. We choose galvanized or powder-coated steel, stainless hardware, and marine-grade control enclosures for every Tavernier installation, then elevate the control box and seal the wiring against salt spray and storm surge. Call (833) 570-5807 for a free measure and a written price.
Do you handle the power run and safety edges for a new gate?
We do. Every new gate includes the full electrical run from the panel to the operator, plus safety edges and sensors that meet current code, which matters in Tavernier where floodplain elevation and wind load affect where the wiring can go. Call (833) 570-5807 to schedule a site visit.
Brands We Service in Tavernier
We’re brand-agnostic, which means we fix what you have instead of pushing a replacement you don’t need. Our Tavernier trucks carry common parts for DoorKing, Elite, Mighty Mule, and Ghost Controls operators, so most board and sensor swaps happen in one visit. Read more about our approach on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Tavernier, FL
| Service | Typical range in Tavernier |
|---|---|
| Gate repair call and diagnosis | $85 – $160 |
| Hinge and wheel replacement | $120 – $340 |
| Gate post replacement | $250 – $680 |
| Swing gate repair | $90 – $680 |
| Sliding gate repair | $90 – $1,050 |
| Electric gate repair (labor only) | $85 – $1,150 |
| Gate opener repair | $140 – $780 |
| Driveway gate installation | $3,200 – $9,600 |
| Automatic gate installation | $4,800 – $12,800 |
| Sliding gate installation | $5,600 – $14,200 |
Prices push toward the higher end in Tavernier when a gate sits directly on the canal front, where salt spray forces us to use stainless hardware and marine-grade enclosures, or when an older concrete block home needs additional concrete work at the post bases. Every quote is agreed before any work starts, so the number we give you is the number on the invoice.
Neighborhoods We Serve in Tavernier
We cover the full 33070 ZIP code, from the original mid-century streets near the Old Highway to the canal-front communities closer to the bay. Most of our Tavernier calls get a response within one business day, and emergency storm-related calls are prioritized during hurricane season.
- Harbor Shores
- Tavernier Heights
- Coral Shores
- Ocean View Park
- Plantation Key
Service Area – Cities Near Tavernier
We also serve the rest of the Upper Keys and parts of southern Miami-Dade. You’ll find the same gate specialization in Key Largo, FL, North Key Largo, FL, and Islamorada, FL, plus coverage that extends to the mainland in Florida City, FL.
Serving Tavernier, FL — Our Local Coverage Area
We’re based in the Tavernier area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Tavernier
Most Tavernier calls are scheduled within one business day, and we prioritize storm-related failures during hurricane season when a broken gate can leave a canal-front property unsecured. Call (833) 570-5807 and tell us what the gate is doing, or not doing, and we’ll give you a realistic arrival window.
Many Tavernier gate replacements, especially on canal-front or elevated lots, require a permit because of Monroe County’s wind-load and floodplain codes. We handle the permit paperwork and coordinate with the county so the gate is built and wired to current code from day one.
Yes. We service single-family homes, HOAs, and private community entrances throughout Tavernier, and we’re familiar with the access and scheduling requirements that come with gated neighborhoods and canal-side associations. Call (833) 570-5807 and we’ll coordinate directly with your property manager or board.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tavernier Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Javier Mendoza"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Ramon Salazar"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Bryant