Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Lake Park
If your electric gate is stuck, beeping, or refusing to open in Lake Park, the fix usually comes down to one of four things: the motor, the control board, the safety sensors, or corroded hardware. Most Lake Park calls we handle are component-level repairs on older gates, not full replacements. Miami Gate Company specializes in exactly that work, and we’re a direct call away at (833) 570-5807. We know the 33403 housing stock, the salt-air corrosion patterns, and the specific failure points on gates that have been swinging since before most of Palm Beach County was developed.
Why Miami Gate Company Is Lake Park’s Preferred Electric Gate Repair Company
Lake Park homeowners call us because we don’t guess and we don’t upsell. When a Gate Motor Repair or control board replacement is needed, we diagnose it at the component level and explain what failed before we touch anything. Ruben Castellano built Miami Gate Company around a simple idea: gates are all we do, and that focus shows in the diagnosis. We’re not a fencing company that dabbles in operators, and we’re not a dealer locked into one brand’s ecosystem. We fix what you have.
Our team works on virtually any gate system, and that matters in Lake Park because this isn’t new-construction territory. The housing stock here is largely mid-century concrete-block and CBS homes on small, mature lots, many with original or decades-old ornamental driveway gates. Those gates need repair, not replacement, and they need a tech who understands legacy hardware. That’s us.
Styles & brands we work with
Automatic Gate Repair in Lake Park
Automatic Gate Repair in Lake Park almost always starts with the operator, because that’s what the salt air hits first. On a tight in-town lot off Park Avenue, our tech answered a call on a mid-century ornamental swing gate whose LiftMaster operator had quit after a summer squall. The board was green with corrosion and one hinge had seized solid. We freed the hinge, replaced the corroded stainless fixings and operator board, and did a sag correction at the hinge post rather than the panel, so the gate swung clean without replacing the original gate. That’s the difference between repairing what exists and selling what doesn’t need to be sold.
What does residential Automatic Gate Repair cost in Lake Park? A typical operator board replacement runs $350 to $650 depending on the board. A full operator swap, when the motor is beyond saving, runs $750 to $1,500 for most residential swing gates, installed. We quote the exact price before any work begins, and that number doesn’t change mid-job.
Operator Diagnostics
When a Lake Park gate stops mid-travel, the issue is rarely just the motor. We check the control board for corrosion, test the safety sensors, and inspect the hinge posts on the gate itself. Skipping the post means the repair fails again in six months.
Limit Switch Calibration
After a summer squall settles dust and salt into the track or hinge path, limit switches often fall out of adjustment. We recalibrate them to the actual travel of your gate, not the factory default, which keeps the operator from burning out early.
Electric Gate Motor in Lake Park
Electric Gate Motor replacement in Lake Park is one of the most common repairs we handle, especially on gates within a few blocks of the Intracoastal. Salt-laden air shortens motor life here by years compared to inland Palm Beach County. A motor that might run 10 years in Wellington often lasts 5 to 7 in 33403 unless it’s been serviced and protected from the start.
When do you need a new motor rather than a board or hinge repair? If the motor hums but doesn’t move, trips the breaker repeatedly, or has visible rust bleeding from the housing, it’s time. A typical residential Electric Gate Motor replacement in Lake Park runs $700 to $1,400 including the motor, fittings, and labor. Commercial operators cost more, and we quote those on site after measuring the gate’s weight and cycle count.
Corrosion-Resistant Motor Options
For Lake Park properties within a mile of salt water, we spec motors with sealed or conformal-coated boards and marine-grade fasteners. It costs a bit more up front, but it’s the difference between a five-year motor and a three-year motor on the Intracoastal.
Motor Diagnostics vs. Replacement
We don’t sell motors to fix board problems. Our brand-agnostic diagnosis means we test each component separately. If the board failed but the motor still runs clean, we replace the board and leave the motor alone. You get the right fix for your existing system.
Trusted Brands We Service in Lake Park
Miami Gate Company services the major gate and operator brands you’re likely to own in Lake Park, including LiftMaster, FAAC, BFT, DoorKing, and Mighty Mule. We also work on Ghost Controls and Elite systems. We stock common parts and boards for older operators and can usually source what we don’t keep within a day or two. Whatever brand you have, we know it.
Common Electric Gate Repair Problems We See in Lake Park Homes
- Corroded control boards. Salt air off the Intracoastal eats boards faster than inland techs ever see. Boards fail before panels or posts, which is why we always open the enclosure and inspect first.
- Seized hinges and rusted gearing. Original ornamental gates on mid-century lots bind after summer squalls. Rack and pinion gearing rusts, hinges seize, and the operator stalls while trying to move the extra load.
- Sagging, corroded hinge posts. Old CBS lots shift, and hinge posts corrode at the base. Fixing a sagging panel without addressing the post means the repair fails twice: once now, once again next season.
- Pitted weld joints on painted steel gates. Painted steel gates on the coast rust from the inside at every weld. We grind back the corrosion and reweld, then seal with a marine-grade coating instead of plain paint.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Lake Park, FL
Here’s what Lake Park homeowners can expect to pay, based on common repairs we handle in 33403:
- Board replacement: $350 to $650
- Safety sensor replacement: $180 to $320 per pair
- Hinge and post repair (seized or sagging): $250 to $600, depending on post condition and access
- Full residential operator replacement: $750 to $1,500 installed
- Keypad or remote replacement: $120 to $280
Every price is quoted and agreed before work starts, and the quote is free. Call (833) 570-5807 to schedule a diagnosis. You’ll know the number before we pick up a tool.
We Also Serve Cities Near Lake Park
Our team regularly handles Electric Gate Repair for homeowners in Palm Beach Shores, Riviera Beach, North Palm Beach, and Mangonia Park. If you’re a few blocks outside Lake Park proper, we’re already nearby and familiar with the same coastal conditions.
Serving Lake Park, FL — Our Local Coverage Area
We’re based in the Lake Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Lake Park
Salt-laden air off the Intracoastal corrodes operator control boards and hinge hardware year-round, and Lake Park’s housing stock is predominantly decades-old gates already near the end of their original service life. A board that lasts 10 years inland often fails in 5 to 7 here without protective sealing or conformal coating. Call (833) 570-5807 and we’ll tell you exactly what’s corroding on yours.
On most Lake Park lots, the hinge post is the problem, not the panel. Posts corrode at the base or shift on old CBS lots, and the gate drops at the latch. Replacing a panel without fixing the post is spending money twice. We inspect the post first. Call (833) 570-5807 for a free diagnosis before committing to any work.
We keep common replacement boards, motors, and sensors for older LiftMaster and FAAC operators in stock, and we can source legacy parts for most other brands within a day or two. You don’t need to replace a whole gate because one part failed. Call (833) 570-5807 with your model number and we’ll confirm availability.
Yes. Any automatic gate installed or significantly modified in Lake Park must meet UL 325 entrapment protection standards, which means functioning safety sensors, obstruction detection, and proper force settings. We check compliance on every repair. Call (833) 570-5807 to have your system inspected and brought up to code.
Galvanised steel or stainless steel fixings, hinges, and operator enclosures last far longer than painted steel, especially within a mile of the Intracoastal. Marine-grade coatings on welds and sealed boards extend motor life by years. We spec these materials for coastal Lake Park properties. Call (833) 570-5807 and we’ll walk you through what’s worth upgrading.
Contact Miami Gate Company for Electric Gate Repair in Lake Park
If your gate is stuck, slow, or making noise it didn’t make last week, don’t wait for the salt air to do more damage. Call Miami Gate Company at (833) 570-5807 and Ruben Castellano’s team will diagnose it honestly, quote it fairly, and fix what’s actually broken. One specialist for repair, installation, and everything in between. Serving all of Lake Park, 33403.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Lake Park and the Palm Beach County coast.