Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Key Biscayne
Electric gate repair in Key Biscayne means dealing with salt air, heavy custom gates, and electronics that corrode faster here than almost anywhere else in Miami-Dade. We diagnose the motor, control board, sensors, and wiring, not just the obvious parts. If your gate is stuck open, grinding, or refusing to respond to the remote, call (833) 570-5807 and we’ll get a technician to your property, diagnose the fault, and quote the repair before any work begins.
We work on virtually any gate system on the island, from 1970s wrought-iron swing gates with retrofitted operators to modern underground systems on Crandon Boulevard. The price is always quoted and agreed before we touch a single bolt.
Key takeaways:
- Electric gate repair in Key Biscayne typically runs $180 – $340 for common component fixes; control board replacement runs $350 – $700 depending on the operator brand.
- Salt-laden air and king-tide flooding cause failure modes that inland Miami gate companies rarely see. We plan for them.
- We service 9 major gate and operator brands, including LiftMaster, FAAC, BFT, DoorKing, and Mighty Mule, and we’re brand-agnostic, so we fix what you have.
- Ruben Castellano leads a gate-only team. Gates are all we do, and that focus shows in the diagnosis.
Why Miami Gate Company Is Key Biscayne’s Preferred Electric Gate Repair Company
Key Biscayne is a unique service area. The island’s 33149 zip code covers everything from oceanfront estates on Harbor Drive to gated condo communities along Crandon Boulevard, and each property presents its own gate challenges. We’ve repaired operators on custom ornamental swing gates that weigh over 800 pounds, replaced flooded underground keypads, and rewired control boards that salt spray had eaten through. That’s not generic handyman territory, and we don’t treat it as such.
Our reputation on the island comes from showing up with the right diagnostic tools and the right parts. When a Key Biscayne customer calls about a gate that works intermittently after a storm, our technician already knows to check for saltwater intrusion at the below-grade enclosure before blaming the motor. Ruben Castellano built the company around that kind of front-line technical knowledge. We’re not a fencing contractor who dabbles in gates, and we’re not tied to one manufacturer’s ecosystem. We fix what’s broken, on the system you already own.
Styles & brands we work with





Commercial Gate Operator in Key Biscayne
Commercial Gate Operator work in Key Biscayne means keeping heavy community entry gates, condo access points, and private estate gates running through humidity, salt, and storm surge. The first sentence of any honest diagnosis here starts with the question: is the operator sized correctly for the gate? Many of the island’s custom ornamental gates were built decades ago, then retrofitted with an operator that struggles against the added weight and wind load. A commercial gate operator repair in Key Biscayne typically runs $250 – $600, with full operator replacement on larger systems running $1,200 – $3,000 depending on duty cycle and access control integration.
Operator Diagnostics on Heavy Gates
When a commercial operator fails, most people assume the motor is dead. Often it’s not. We check limit switches, capacitor condition, control board outputs, and amperage draw under load before recommending any parts replacement. On a 600-pound swing gate, an undersized capacitor or a misaligned limit cam can mimic motor failure. We find the actual fault, then quote the exact repair.
Weathertight Enclosure Upgrades
Below-grade operator vaults along the Crandon Boulevard corridor flood during king tides and heavy rain, and the contacts corrode for weeks afterward. We upgrade enclosures with weathertight gaskets and marine-grade sealants, because on this island the enclosure matters as much as the operator inside it. A sealed system is a system that doesn’t call you back with the same fault next month.
Gate Opener Repair in Key Biscayne
Gate Opener Repair in Key Biscayne is one of our most common calls, and it’s rarely as simple as swapping a remote battery. A gate opener on this island has to fight salt corrosion, hurricane-driven rain, and sand that works its way into every track and sensor housing. When a Key Biscayne homeowner’s opener stops responding, we trace the signal path from the remote, through the receiver and control board, to the motor itself. Typical opener repair on the island runs $140 – $280 for component-level fixes, and $400 – $900 when the control board or motor has to be replaced.
Remote and Keypad Failures
Keypads exposed to ocean air develop corroded contacts faster than you’d expect. A keypad that works only when pressed hard usually has salt crust inside the membrane. We test the receiver, reprogram transmitters when needed, and replace keypads with weather-sealed units rated for coastal exposure. Your system should work every time, not only on dry days.
Underground Operator Flood Recovery
On the low-lying western side of Key Biscayne, we regularly pull open below-grade operator vaults and find standing water or salt residue on the control board. We dry out the enclosure, replace corroded relays and boards, and reseal everything before it goes back into service. That’s the difference between a repair that lasts and one that fails again in six weeks.
Trusted Brands We Service in Key Biscayne
We train on 9 major gate and operator brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. On Key Biscayne we see a lot of DoorKing and Elite systems on condo communities, plus Ghost Controls and Mighty Mule units on residential driveway gates. Because we’re brand-agnostic, our recommendation is based on what your system needs, not what a single manufacturer wants us to sell. For Key Biscayne customers, we keep the most commonly needed components close by, boards, safety sensors, capacitors, and weather-sealed remotes, so a repair isn’t delayed waiting on a part that has to ship from out of state.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Key Biscayne Homes
- Rust on hinge posts and fasteners: Salt spray eats through standard hardware in a few years. Heavy ornamental gates start to sag, and the operator strains harder every cycle until it trips an overload or burns a capacitor. We replace fasteners with marine-grade stainless and re-align the gate before the operator takes serious damage.
- Saltwater intrusion into below-grade enclosures: After a king tide on the Crandon Boulevard corridor, underground operators and keypads short out or develop intermittent faults. We see this pattern for weeks after the water recedes, and the fix starts with a dry, sealed enclosure.
- Sand and debris in slide tracks: Post-storm sand builds up in slide gate tracks and blocks safety photocells, which triggers false entrapment signals and stops the gate from closing. The operator isn’t broken, it’s blinded. We clear the track, clean the lenses, and test the safety circuit end to end.
- Control board corrosion from humidity: Even without direct flooding, ambient humidity on the island gets inside unsealed enclosures and slowly corrodes board contacts. The result is a gate that works most of the time, then fails at the worst moment. We replace the board and seal the housing against future moisture.
Pricing for Electric Gate Repair in Key Biscayne, FL
We quote every repair before work starts, so you know the number before we turn a wrench. A standard service call and diagnostic in Key Biscayne runs $75 – $125. Common component repairs like capacitors, limit switches, or photo eye replacement run $140 – $280. Control board replacement on most residential operators is $350 – $500, and commercial boards run $500 – $700. Full operator replacement on a heavy custom gate starts around $1,200 and goes up with duty cycle and access control requirements. Underground operator flood recovery, a Key Biscayne specialty, typically runs $300 – $650 depending on how much of the board and harness has to be replaced. Call (833) 570-5807 for an exact quote, estimates are free.
The local insight that matters for this island: Key Biscayne’s low-lying western side along the Crandon Boulevard corridor sees saltwater intrusion into below-grade gate operators and keypads after king tides or heavy storms, causing weeks of intermittent failures as contacts corrode. That’s a failure pattern that inland Miami gate companies rarely encounter at this intensity, and it changes what the right repair looks like. You don’t just swap a part; you re-engineer the enclosure so the part survives.
On Harbor Drive, we repaired a custom wrought-iron swing gate with a LiftMaster operator that had been failing intermittently for weeks after a king tide pushed saltwater into its below-grade enclosure. Our tech replaced the corroded control board, sealed the enclosure with a weathertight gasket, and applied a marine-grade coating to the hinge post and fasteners. The gate now runs silently and reliably despite the island’s salt-laden air.
We Also Serve Cities Near Key Biscayne
While this page covers Key Biscayne specifically, our Electric Gate Repair team also runs calls to Coconut Grove, Coral Gables, Miami Beach, and Miami. If you own a property across the causeway or manage a building in one of those nearby cities, the same gate-only expertise applies. Call us and we’ll route a technician accordingly.
Serving Key Biscayne, FL — Our Local Coverage Area
We’re based in the Key Biscayne area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Key Biscayne
Your gate fails more often because Key Biscayne’s oceanfront position exposes hardware to salt spray, wind-driven rain, and storm surge, conditions that are far more aggressive than what Coral Gables sees a few miles inland. The low-lying western side of the island, especially along Crandon Boulevard, takes saltwater into below-grade enclosures during king tides, and that corrosion causes intermittent failures for weeks afterward. Call (833) 570-5807 and we’ll evaluate whether your enclosure needs weathertight sealing.
Heavy custom gates need hinge lubrication, limit switch adjustment, capacitor testing, and a full check of the operator’s mounting hardware at least twice a year on this island. Salt air accelerates wear on pivot points, so we recommend marine-grade grease and quarterly pressure-washing of the gate and track where debris accumulates. Call (833) 570-5807 and we’ll schedule a maintenance pass before the next storm season.
The likely cause is saltwater intrusion into the below-grade enclosure, where contacts and boards short out and corrode. Even after the water drains, salt residue keeps causing intermittent failures until the components are cleaned or replaced and the enclosure is properly sealed. This is a Key Biscayne pattern we handle regularly. Call (833) 570-5807 for a diagnostic.
Yes, UL 325 requires entrapment protection on all automatic gate operators, including safety photocells and reversing mechanisms on most systems. If your existing gate lacks working photo eyes, we can install and align them and test the entrapment circuit so the gate meets current safety standards. Call (833) 570-5807 for an inspection.
In most cases, yes. Sagging on a heavy ornamental gate usually comes from worn hinge hardware or a rusted hinge post, not from the gate itself. We replace the fasteners with stainless components, re-weld or reinforce the post if needed, and realign the gate so it swings cleanly. Call (833) 570-5807 and we’ll tell you honestly whether the gate can be saved.
Written by Ruben Castellano, owner at Miami Gate Company, serving Key Biscayne and the surrounding Miami area.