Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Miami Homeowners
A gate installation in Miami isn’t just about setting posts and hanging a leaf. It’s about choosing the right operator for the salt air, the right track system for limestone-heavy soil, and the right control board for how that gate actually gets used every day. We’re Miami Gate Company, and gates are all we do. From home driveway systems in Coral Gables to commercial slide gates in Allapattah, we install, wire, and program the full system, not just the metal you see. Call (833) 570-5807 and you’ll talk to someone who can diagnose your site over the phone before we ever send a truck.
Key Takeaways
- Gate installation in Miami costs more than inland cities because salt corrosion protection and wind-load anchoring are mandatory, not optional.
- We work on 9 major brands including DoorKing, Elite, and Ghost Controls, so you’re never pushed into one ecosystem.
- Electric gate installation is our core competency, not an add-on. We handle the motor, board, sensors, and power run.
- Free estimates include a site walk, measurement, and a written price before any work starts.
Styles & brands we work with
Automatic Gate Installation
Automatic Gate Installation means adding a motor, control board, safety system, and access controls to a gate so it opens and closes without anyone leaving their car. In Miami, the humidity and salt air punish cheap automation fast, so we specify operators rated for coastal exposure and build the control housing to keep moisture out. We install systems from Ghost Controls, DoorKing, and Elite, matching the operator to the gate’s weight, cycle frequency, and exposure, not whatever’s on the shelf. A basic single-swing automatic system on flat ground typically runs $3,800 to $7,500 installed, though Gate Installation pricing varies with options. If you’re adding keypads, vehicle loop detectors, or battery backup, expect the price to climb from there. We quote the full number in writing before any work begins.
Operator Sizing and Cycle Rating
We calculate the gate’s weight and wind surface area before recommending an operator. Undersized motors burn out in under two years in Miami’s heat. Oversized ones slam the gate and tear hinges loose. The cycle rating matters most on condo and HOA gates in neighborhoods like Brickell or Edgewater that open 200 times a day.
Safety Sensor Compliance
Every automatic gate in Florida must meet UL 325 safety standards, which means photo eyes, reversing edges, and audible alarms on commercial systems. We install and test all of it. If your gate can’t reverse when a child or pet is in the path, it’s not done.
Gate Installation Services
Gate Installation Services covers the full scope of what we do on-site: measuring, demolition of an old gate if needed, post setting, gate hanging, operator mounting, wiring, programming, and final safety testing. Some Miami properties need a straightforward swap of a rusted manual gate. Others need a full custom build with welded steel, powder coating, and a new operator. We handle both. Pricing depends heavily on gate size, material, and whether you’re automating. A standard manual driveway gate install starts around $1,800 to $3,500. Add an operator and controls, and most residential projects land between $4,000 and $9,000. You get a written price before we start, and that price doesn’t change unless the scope does.
Residential Gate Installation
Most Miami homes need either a swing or slide gate depending on driveway slope and setback. Swing gates work best on flat lots, while slide gates save space where the driveway slopes up or the property line sits close to the street. We measure both and tell you which makes sense for your lot.
Commercial Gate Installation
Warehouses, condo associations, and apartment buildings in areas like Doral and Hialeah Gardens need different hardware than Gate Installation – Brownsville or a house in Coconut Grove. Commercial gates run more cycles, need heavier operators, and often require vehicle loop detectors and telephone entry systems. We design for the actual daily load, not a residential spec scaled up.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation
Electric Gate Installation is the electrical half of the job: running conduit and wire from the panel to the operator, mounting the control board, wiring the safety sensors, and connecting keypads or access systems. It’s the part most contractors get wrong because residential electricians don’t know gate automation, and fencing crews don’t know code. We do both. A straightforward electric gate install with one operator, two remotes, and a keypad runs roughly $4,500 to $8,500 in Miami. Long power runs, intercom tie-ins, or battery backup add cost. The estimate breaks it down line by line, and we tell you if your panel has capacity before we start pulling wire.
Power Runs and Conduit
Most Miami gate locations need a dedicated 110V circuit run to the operator, plus low-voltage cable for sensors and access controls. We bury conduit to code, use weatherproof junction boxes, and leave slack for future upgrades. Shallow or unshielded wire is the number one cause of ghost faults we repair on other contractors’ installs.
Control Board Programming
The board is the brain. We set travel limits, force sensitivity, auto-close timers, and accessory inputs during installation, then test every function with the customer standing there. If you have a DoorKing board, we know the dip switches. If it’s an Elite, we know the LCD menu. No reading the manual on your driveway.
Driveway Gate Installation
Gate Installation – Miami homeowners typically call us first for a gate across the driveway entrance, either swinging or sliding, manual or automatic. The biggest variable in Miami is the driveway itself. Coral rock under thin topsoil makes post holes hard. Low spots flood in summer storms. Tight setbacks mean a swing gate would clip the car. We account for all of it before we quote. A manual double-swing driveway gate installed on new steel posts usually runs $2,500 to $5,000. Automated driveway gates start closer to $5,000 and climb based on operator choice, access controls, and gate material. We measure, quote, and install. The price is set before work starts.
Material Selection for Coastal Air
Aluminum holds up better than raw steel within a few miles of Biscayne Bay, but steel is stronger for long spans. We powder-coat either option and use stainless hardware throughout. A gate that rusts through its hinges in four years is a gate we didn’t spec properly.
Setback and Swing Clearance
Miami lots are narrow, which means many driveways can’t fit a full swing arc. We measure the actual swing path and tell you honestly if a slide gate or a bi-fold configuration fits better. Better to know before you pour concrete than after.
Sliding Gate Installation
Sliding Gate Installation uses a track or cantilever system so the gate moves sideways instead of swinging out. In Miami, that’s often the right call on sloped driveways, narrow properties, or anywhere a swing gate would block the sidewalk or the street. We install both rolling track sliders and cantilever sliders that need no ground track at all, which matters when flooding or debris would clog a bottom rail. Typical slide gate installs run $4,000 to $9,000 for residential, and $8,000 to $20,000 plus for commercial spans. The steel, the track, the operator, and the post engineering all factor in. Written quote first, always.
Cantilever vs. Track Systems
Cantilever gates ride on rollers mounted to offset posts, leaving the opening clear underneath. Track gates need a level surface and regular cleaning to keep rolling smoothly. We recommend cantilever for most Miami residential installs because leaves, sand, and flood debris kill bottom tracks fast.
Steel Frame Engineering
A 20-foot sliding gate carries enormous bending load, especially in tropical storm winds. We build the frame with enough internal bracing to prevent sag, and we size the posts for the gate’s full cantilevered weight. That’s the difference between a gate that still rolls in ten years and one that scrapes the ground by year three.
Gate Opener Installation
Gate Opener Installation focuses on the drive unit that does the work: mounting the arm or rack, wiring power, setting limits, and programming remotes. We install openers from LiftMaster, DoorKing, Elite, Ghost Controls, Mighty Mule, and others, but we match the opener to the gate, not the other way around. A piston arm opener on a standard single swing gate with the power already nearby typically runs $1,200 to $2,800 installed. If no power exists at the gate location yet, add the electrical run cost. We’ll tell you the total before we order a single part.
Arm vs. Ram vs. Underground
The opener style depends on the gate’s look and structure. Articulated arms work on most swing gates. Linear rams push heavier gates. Underground openers hide everything but cost the most to install and maintain. We explain the tradeoffs for your exact gate and use case.
Remote and Accessory Pairing
We program remotes, wireless keypads, and vehicle transmitters during the opener install, then walk you through every function before we leave. You shouldn’t have to call back because a remote wasn’t programmed. If you add a new remote later, it’s a quick visit.
Gate Fabrication
Gate Fabrication is when we build the gate itself from raw steel or aluminum instead of bolting together a kit. For Miami, that means custom widths for odd openings, custom heights for privacy or HOA rules, and custom infill patterns. We fabricate in steel and aluminum, then powder coat for coastal conditions. Custom fabricated gates start around $3,000 to $7,000 for a standard residential single drive leaf, and go up with size, design complexity, and finish. The quote includes fabrication, delivery, installation, and coating. You approve the design and the price before fabrication starts.
Custom Dimensions and Infill
Miami properties are full of non-standard openings: 14-foot driveways, 8-foot privacy heights, curved top rails. We build to the actual measured opening, not the nearest stock size. Infill options range from vertical pickets to horizontal bars to solid privacy panels, depending on what the HOA allows.
Powder Coating and Corrosion Prep
We sandblast or chemically clean every frame before coating, then apply a marine-grade powder coat. That’s the only way steel survives within the salt spray zone. A cheaper paint job on raw steel will bubble in eighteen months near the bay. We don’t do that to customers.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We’re trained across nine major gate and operator brands, and that’s on purpose. A gate company tied to one manufacturer will always recommend what they sell, even when your existing system just needs a board or a sensor. We don’t have that problem. Within the Miami market, we regularly install and service DoorKing systems on condo and commercial gates, Elite operators on heavy slide gates, and Ghost Controls on residential swing systems where homeowners want simple, reliable automation.
We also carry programming knowledge for Mighty Mule units, which show up on a lot of DIY and builder-grade installs. We know what those units can and can’t do on a 16-foot gate in a coastal climate. Whether you have one of these brands or any other make, we can help. Gates are all we do, and that focus shows in the diagnosis and the install.
Signs You Need a Pro Right Now
- Your gate sags or drags. A gate that scrapes the ground is a hinge or frame problem getting worse. In Miami’s humidity, the pivot points corrode fast, and a dragging gate will eventually tear the operator loose.
- You hear grinding when it opens. That’s usually a failing gear in the operator or a wheel bearing on a slide gate. Run it long enough and the whole drive unit needs replacement instead of a simple part.
- The gate hesitates or reverses for no reason. That’s the safety system or limit switches acting up. An improperly adjusted gate can close on a car, a pet, or a person.
- You’re holding the remote against the windshield for it to work. Low signal usually means antenna problems, interference, or a dying receiver board. It’ll fail completely sooner than later.
- Water pools around the operator or the post bases. Standing water accelerates every problem above. In Miami’s rainy season, drainage around the gate posts matters as much as the hardware itself.
Our Process, Step by Step
- 1
Site Walk and Measurement. We come out, measure the opening, check the ground slope, look at the power source, and talk through how you want the gate to work. This is where we catch problems before they become change orders.
- 2
Written Proposal. We send a line-item quote with the gate, operator, controls, electrical, and installation broken out. You know what you’re paying and why. Nothing gets ordered until you approve it.
- 3
Fabrication or Ordering. For custom gates, we build to the approved drawing. For stock gates, we order from suppliers we’ve vetted for coastal durability. This step takes the longest, and we give you a real timeline.
- 4
Installation and Wiring. We set posts, hang the gate, mount the operator, pull wire, and connect everything. Safety edges and photo eyes get installed on every automatic gate, tested under load, not just clicked on and left.
- 5
Programming and Walkthrough. We program remotes, keypads, and any access system, then run the full open-close cycle with you on site. You operate it before we leave. If something feels off, we fix it then, not on a callback.
How Much Does Gate Installation Cost in Miami?
A typical manual driveway gate installation in Miami runs $1,800 to $5,000 depending on gate size, material, and how much site prep the driveway needs. Add automation and most homeowners land between $4,000 and $9,000 all in. Custom fabricated gates with automation and access controls can exceed $12,000. Commercial slide gates with heavy operators and loop detectors routinely run $10,000 to $25,000.
What moves the price: gate width and weight, operator brand and duty cycle, how far the power run is, whether you need masonry posts or steel, and whether the old gate needs demolition and haul-off. How to avoid overpaying: get a line-item quote and compare what’s actually included. Some Miami contractors quote a gate price and then charge separately for power, remotes, and safety sensors. Our estimate includes everything needed for a working, code-compliant gate, and the price is agreed before any work starts. Call (833) 570-5807 for an exact quote on your property.
Our Service Area Near Miami
We install gates across Miami-Dade from Miami Beach to Allapattah, and into Brownsville, Gladeview, North Bay Village, El Portal, Coconut Grove, Key Biscayne, Coral Gables, Miami Shores, and West Little River. If you’re inside the county, we can usually schedule a site walk within a few business days. For property managers with multiple gates in the area, call (833) 570-5807 and we’ll coordinate a walkthrough on your schedule.
Serving Miami, FL — Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Miami
Gate installation is the full process of placing a new gate at your driveway, entry, or commercial access point: measuring, setting posts, hanging the gate, installing the operator if it’s automatic, connecting power and controls, and testing everything. It’s not just dropping a pre-built gate on hinges. In Miami, proper installation also means corrosion protection, wind-load anchoring, and safety sensor compliance.
A standard residential gate swap usually takes one full day on site. Custom fabrication adds one to three weeks for building and coating before the install day. Commercial slide gates with heavy operators often run two to three days on site. We give you a timeline in the written proposal, not after you’ve already signed.
Residential gate installation in Miami typically runs $1,800 to $9,000 depending on whether the gate is manual or automatic, what material it’s built from, and how much electrical work is involved. Commercial installations start higher due to heavier hardware and access systems. Every quote is line-item and agreed before work starts, so the number on the proposal is the number you pay.
Yes. DoorKing is one of the brands we’re trained on, and we install and program their operators, phone entry systems, and vehicle detectors regularly. We also work on Elite, Ghost Controls, Mighty Mule, LiftMaster, FAAC, BFT, Linear, and Viking. Whatever brand you have, we know it.
If your gate is stuck open and the property is unsecured, call (833) 570-5807 and we’ll tell you what can be done immediately. Full installations are scheduled, but we can often send a tech to secure the opening or disable a failed operator while we plan the replacement. Tell us what happened and we’ll give you honest options.
We stand behind our installation work and the manufacturers stand behind their products. The specific coverage depends on what gets installed: operators have different warranties than fabricated steel. We put the warranty terms in writing on every proposal, so you know exactly what’s covered and for how long before you sign.
Clear the area around the gate posts and the path where the gate will swing or slide. Move any vehicles, planters, or decorations within ten feet of the work area. If you have an HOA, confirm any design requirements with them before we start so the new gate matches what’s allowed. We’ll handle the rest, including demolition and haul-off of the old gate.
Schedule Your Gate Installation Service in Miami Today
Whether you need a new automatic driveway gate in Coconut Grove or Allapattah Gate Installation for a commercial slide gate replacement, we’ll measure, quote, and install it right. Call (833) 570-5807 for a free, no-obligation estimate on your gate installation in Miami. You’ll talk to someone who does gates all day, every day, and the price we quote is the price you pay.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Miami since day one.