Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Boynton Beach
Electric gate repair in Boynton Beach usually means one of three things: a motor that quit, a gate that reversed for no reason, or a control board that stopped talking to the keypad. We handle all three, plus the sensors, loops, wiring, and remotes that most generalist handymen won’t touch. If your gate is stuck open, stuck closed, or somewhere in between, call (833) 570-5807 and we’ll walk you through what’s likely wrong before we even send a truck. We work throughout Boynton Beach – from the gated communities along Hagen Ranch Road to the older ranch neighborhoods west of I-95.
Our Electric Gate Repair team knows this area’s gate systems better than anyone, because we’ve spent years working on the specific brands and configurations that dominate Boynton Beach’s HOA communities. You don’t need to explain your gate’s history to us. We already know what a 1990s LiftMaster slide operator sounds like when its loop detector is failing, and we know what salt-air corrosion does to a DoorKing control board after 25 years a few miles from the ocean.
Why Miami Gate Company Is Boynton Beach’s Preferred Electric Gate Repair Company
Ruben Castellano built Miami Gate Company around a simple idea: gates are all we do. That focus shows up in how fast we diagnose problems in Boynton Beach, because we’re not splitting our attention between fencing, garage doors, and a dozen other trades. When a property manager off Boynton Beach Boulevard calls about a community gate that’s reversing randomly, we know the most likely culprits before we arrive – corroded loop detector, worn rack and pinion, or a control board that’s been fighting humidity for two decades.
We service nine major gate and operator brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Boynton Beach because this city’s gate stock is old and mixed. A 1980s HOA might run DoorKing slide operators at the main entrance and a Mighty Mule on the pedestrian gate. A 1990s active-adult community might have FAAC swing arms on the resident gates and a Viking on the service gate. We don’t blink at any of it. Brand-agnostic means we fix what you have – we’re not here to sell you a system you don’t need.
Our reputation in Boynton Beach comes from showing up when the gate is actually broken, not three days later. HOAs and homeowners call us because they’ve already tried the handyman route and watched it fail. Gates are mechanical systems with electrical brains, and partial fixes don’t last in this climate. We diagnose the motor, board, sensors, and wiring – not just the obvious parts.
Styles & brands we work with
Automatic Gate Repair in Boynton Beach
Automatic Gate Repair in Boynton Beach typically runs $185 – $390 for most component-level fixes, while full operator replacements on aging HOA gates start around $1,200 – $2,400 depending on the arm type and gate weight. The city’s concentration of 1970s – 2000s gated communities means we see a lot of systems that have been in continuous service for 20 to 40 years. Those gates don’t fail quietly – they fail in clusters after storms and during the humid summer months.
Slide Gate Diagnosis and Rack Repair
Slide gates are the workhorses of Boynton Beach’s HOA entrances, especially along the Hagen Ranch Road corridor. The rack and pinion system that moves a steel slide gate takes constant abuse from salt air and daily cycling. When the rack wears unevenly, the gate jerks, grinds, and eventually stalls. We replace worn rack sections, realign the pinion, and test the full travel cycle before we leave.
Swing Gate Hinge and Operator Alignment
Swing gates on older Boynton Beach properties – particularly the 1960s and 70s ranch homes west of the Intracoastal – often sag because the hinge posts have shifted in sandy soil. That misalignment puts strain on the operator arm and burns out motors prematurely. We check the post, the hinges, and the operator’s torque settings together, because fixing one without the other just moves the problem around.
Electric Gate Motor in Boynton Beach
Electric Gate Motor replacement in Boynton Beach is one of our most common calls, and it usually costs $450 – $950 for a residential swing or slide motor, or $900 – $1,800 for heavy commercial operators on HOA entry gates. Salt-air corrosion is the silent killer here. A motor that looks fine from the outside can be rusted solid inside its housing, especially if the gate sits within a few miles of the ocean. Boynton Beach’s humidity doesn’t give these motors a break, ever.
Motor Swap and Retrofit
When we replace a motor in Boynton Beach, we don’t just bolt on whatever’s on the truck. We match the motor to the gate’s weight, cycle count, and wind load – which matters during hurricane season when a 400-pound gate becomes a sail. We also check the capacitor and the limit switches at the same time, because a new motor on a failing capacitor is a callback waiting to happen.
Control Board and Sensor Integration
The motor is only as smart as the board driving it. In Boynton Beach’s salty, humid air, control boards corrode at the terminal strips and start sending erratic signals – gates that reverse for no reason, keypads that stop working, sensors that false-trigger. When we replace a motor, we test the board, the safety loops, and the photo eyes together so the whole system works as one unit, not a patchwork of new and failing parts.
Trusted Brands We Service in Boynton Beach
We work on virtually any gate system – whatever brand you have, we know it. That includes Ghost Controls, which we see a lot on newer residential driveway gates in Boynton Beach’s 33437 and 33472 communities, as well as DoorKing and Elite, which dominate the commercial and HOA entry gates along Boynton Beach Boulevard. Because gates are all we do, our techs carry boards, sensors, and remote receivers for these brands on the truck – not ordered in from a warehouse three days out. For Boynton Beach customers, that often means the difference between a same-visit repair and a week of waiting with a gate propped open.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Boynton Beach Homes
- Corroded loop detectors on community gates. The salt air near the Intracoastal eats through the wire insulation on safety loops buried in the pavement. When the loop fails, the gate either won’t close or reverses mid-cycle, which is why so many HOA gates off Hagen Ranch Road act erratically after a few years of service.
- Storm-related misalignment on swing gates. Hurricane-force winds don’t just bend the gate itself – they crack the hinge posts and shift the operator mounts. A gate that worked fine in May can bind and stall in September after one tropical storm pushes it half an inch out of plumb.
- Control boards fried by humidity and power surges. Boynton Beach’s afternoon thunderstorms bring lightning, and lightning brings power surges. We replace a lot of control boards that took a surge through the low-voltage wiring, especially on older systems without proper surge protection.
- Worn gearboxes on 1990s-era slide operators. The slide operators installed during Boynton Beach’s 1990s building boom are now 25 to 35 years old, and their gearboxes were never designed for that lifespan. We see the same failure pattern across whole neighborhoods – that’s why a cluster of homes on the same block will all need motor work within a few years of each other.
Pricing for Electric Gate Repair in Boynton Beach, FL
Here’s what we actually charge in Boynton Beach, because vague “free estimate” pages don’t help anyone. A basic service call and diagnosis runs $85 – $125, credited toward the repair if we do the work. Remote control programming or replacement is $45 – $125. Keypad repair or replacement runs $95 – $260. Safety sensor replacement is $120 – $290. Control board replacement runs $190 – $520 depending on the brand and board type. Motor replacement runs $450 – $950 residential, $900 – $1,800 commercial. Full automatic gate repair jobs – motor, board, sensors, and alignment – typically land between $600 – $1,500 on a residential gate. The price is quoted and agreed before any work starts, and we don’t add surprise line items afterward. Call (833) 570-5807 for an exact quote on your gate – estimates are free.
We Also Serve Cities Near Boynton Beach
Our electric gate repair service covers Boynton Beach and the surrounding communities, including Aberdeen, Ocean Ridge, Atlantis, and Hypoluxo. Many of these areas share the same coastal climate and aging gate stock, so our team already knows what to expect before we arrive. If you’re just outside Boynton Beach proper, call us and we’ll confirm coverage for your neighborhood.
Serving Boynton Beach, FL — Our Local Coverage Area
We’re based in the Boynton Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Boynton Beach
A reversing gate in Boynton Beach is almost always a failing safety loop detector or a corroded control board terminal, and you can usually tell which by when the reversal happens. If the gate reverses only when a car is present, the loop detector is likely corroded or misaligned. If it reverses randomly even when nothing is near it, the board is sending ghost signals – common after a power surge or years of humidity exposure. Call (833) 570-5807 and we’ll diagnose it on site.
In most Boynton Beach HOA communities, repairing an existing motor with a like-for-like replacement does not require architectural review, but changing the gate style, height, finish, or operator type often does. Many HOAs along Hagen Ranch Road and Boynton Beach Boulevard require written approval before any visible modification. We work directly with property managers on this – we can provide the spec sheets and installation details your architectural committee needs before the work starts.
Because they were installed at the same time, by the same builders, using the same equipment. Boynton Beach’s gated communities were largely built in waves – 1970s, 1990s, and 2000s – and each wave used similar operators. When a 1990s-era LiftMaster slide operator reaches the end of its lifespan, every other 1990s LiftMaster in that neighborhood is approaching the same failure point. Add in salt-air corrosion and hurricane stress, and the failures cluster. We service these communities in batches, which means we already know your gate system before we arrive.
Yes, and in Boynton Beach this is one of our most common post-storm calls. A sagging swing gate usually means the hinge post has shifted or the hinges themselves have bent under wind load. We realign the gate, reinforce or replace the hinge post if needed, and recalibrate the operator so the motor isn’t fighting the misalignment. We also check the safety edges and photo eyes afterward, because a gate that moves differently after repairs needs its sensors retested.
We service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Boynton Beach specifically, we see a lot of DoorKing and Elite on HOA entry gates, Ghost Controls on newer residential driveway gates, and Mighty Mule on smaller pedestrian gates. If you have a different brand, call us anyway – our techs are trained across competing platforms, so we diagnose based on what your system needs, not what a single manufacturer incentivizes.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Boynton Beach and surrounding communities.