Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Dundee, FL
Gate installation in Dundee means planning for sandy soil, summer storm runoff, and posts that want to lean. Most homes here sit on the Lake Wales Ridge, where the ground drains fast but shifts after every hard rain. We install wood, ornamental metal, and automatic gates the right way for that terrain: deep-set posts with extra concrete, drainage where the water pools, and hinges and hardware that survive Central Florida humidity. If you need a gate that stays square and swings clean for years, call Miami Gate Company at (833) 570-5807.
Why Dundee Homes Are Different
Dundee sits on the Lake Wales Ridge, a spine of ancient sand dunes that runs down the middle of the Florida peninsula. That sandy, well-drained soil is the defining fact of gate work here. It drains beautifully in dry weather, but after a central Florida thunderstorm, water moves through it fast and carries fines away. Gate posts set only two feet deep in that soil will lean, and a wood gate that swung fine in March will drag on the latch side by July. We see it every year, especially on older single-family lots and the small lakefront properties where fences and gates were set years ago with shallow footings.
The housing stock compounds the issue. Dundee is a mix of older single-family homes with fenced yards and newer subdivisions on the outskirts. The older gates are mostly wood or ornamental metal on 4×4 or 6×6 posts. The newer subdivisions often have aluminum gates and automatic openers, but the builders set posts to a price, not to the soil. Either way, the failure pattern is the same: settlement, leaning, and hardware rust from year-round humidity. We adjust our installation methods to match.
Styles & brands we work with
Our Main Dundee Services
Most Dundee calls to us come down to two things: a gate that is falling apart or sagging, and an electric gate that will not open or close reliably. Here is what each involves locally.
Gate Repair in Dundee
Repair work here usually starts with a post that has moved. The sandy ridge soil erodes on the downhill side after storms, so the post leans outward and the gate binds. We re-set posts with deeper footings and added drainage, then address hinges, latch hardware, and any wood rot or metal rust that has set in. A gate that just needs a hardware refresh is a different job than one that needs structural re-setting, and we quote them separately so you know what you are paying for. Gate Repair in Dundee covers the full scope.
Electric Gate Repair in Dundee
Electric gates here fail for predictable reasons: moisture in the control board, a photo eye knocked out of alignment by a leaning post, or a motor straining against a gate that the soil has shifted. We diagnose at the component level, so you are not paying for a new operator when the real problem is a $40 sensor or a wiring splice that has corroded. Heat and humidity shorten the life of circuit boards across Central Florida, and Dundee gets both. Electric Gate Repair in Dundee walks through what we check.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Dundee
When we install a gate in Dundee, we design around the ridge. Posts on this sandy soil need deeper holes than standard Florida practice, with concrete that extends below the erosion zone and drainage so water does not sit against the post base. We check the slope before we dig, because a gate on a downhill grade needs different hinge geometry than a gate on flat ground. Whether you are adding a driveway gate to a new subdivision home or replacing a rusted gate on an older lakefront lot, the work starts the same way: measure the span, test the soil, and set the posts to stay. Gate Installation is our core service, and we handle the whole thing from layout to final hardware.
Automatic Gate Installation
Signs you need it
You are tired of getting out of the car to open the gate, or you want controlled access to a driveway or back yard that currently has a manual gate.
What it costs in Dundee
Automatic gate installation in Dundee typically runs $3,800 to $9,600 depending on operator type, gate weight, and whether we are running new power to the post.
How we do it
We mount the operator, run power from the nearest source, install safety sensors and a receiver, set the open and close limits, and test the full cycle under load.
Driveway Gate Installation
Signs you need it
You have a wide driveway opening that needs a full-width gate, either for privacy, security, or keeping kids and pets in the yard.
What it costs in Dundee
Driveway gate installation in Dundee generally costs $2,100 to $7,500 depending on material, span, and whether it is a single swing, double swing, or slide.
How we do it
We measure the opening, dig post holes to a depth that suits the ridge soil, set posts with concrete and drainage, hang the gate, and dial in the hinges and latch.
What Gate Installation Costs in Dundee
| Item | Typical range in Dundee |
|---|---|
| Automatic gate installation | $3,800 – $9,600 |
| Driveway gate installation | $2,100 – $7,500 |
| Sliding gate installation | $3,200 – $8,900 |
What pushes the price up here is soil work: a post that needs to go four feet deep with extra concrete costs more than a shallow standard set. We give you the number before we start, and the price we quote is the price you pay.
Do you handle the power run for automatic gates?
Yes. We run power from the nearest source, add a dedicated circuit where needed, and install safety edges or photo sensors so the gate meets code and stops if something is in the way.
Can you install a gate on a sloping Dundee driveway?
We can. Sloped driveways need careful hinge or track planning so the gate does not bind or swing into the grade. We measure the slope and set the post height accordingly.
Brands We Service in Dundee
We work on Ghost Controls and Mighty Mule openers, DoorKing commercial operators, and Elite slide motors. We stock common boards and remotes for these on the truck, so repair turnaround in Dundee is often one visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Dundee, FL
| Service | Typical range in Dundee |
|---|---|
| Gate repair (post reset) | $450 – $1,100 |
| Gate repair (hinge and hardware) | $180 – $450 |
| Electric gate control board replacement | $350 – $850 |
| Electric gate motor replacement | $600 – $1,400 |
| Safety sensor replacement | $150 – $350 |
| Automatic gate installation | $3,800 – $9,600 |
| Driveway gate installation | $2,100 – $7,500 |
| Sliding gate installation | $3,200 – $8,900 |
In Dundee, prices run higher when a post has settled and needs a deep reset with extra concrete, or when an older gate needs structural work before new hardware can go on. We quote the job before we start, so you know the number going in.
Neighborhoods We Serve in Dundee
We work across all of Dundee and the surrounding Polk County area, including the older lakefront streets and the newer subdivisions on the edge of town.
- Downtown Dundee and the lakefront homes
- Subdivisions north of Dundee Road
- Communities east of Highway 27
- Newer construction off Ridge Road
We typically reach Dundee homeowners within one to two business days for non-emergency work, depending on the schedule.
Service Area – Cities Near Dundee
Besides Dundee, we cover the surrounding Polk County communities, including Alturas, FL, Lake Hamilton, FL, Haines City, FL, and Cypress Gardens, FL. If you are on the edge of Dundee or just outside town, call and we will tell you if we cover your street.
Serving Dundee, FL — Our Local Coverage Area
We’re based in the Dundee area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Dundee
Most Dundee calls can be scheduled within one to two business days. We are based in Miami and cover the area as part of our broader Florida service footprint, so we plan Dundee jobs in blocks.
Most gate replacements that keep the same footprint do not require a permit in Polk County, but if you are adding a new driveway gate or running electrical for an opener, a permit may be needed. We handle the paperwork when required.
Yes. We work with HOAs and property managers on both single gates and small communities, and we can coordinate access and scheduling with your board or management office.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dundee Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Bethany Hayes"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Javier Mendoza"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Ramon Salazar